Nice work! Glad you found some use for that lock. It was in pretty bad shape when I sent it out. It was likely used for some outdoor electrical/telephone box and the elements were not kind to it.
I am a locksmith who picked mul t locks for years and pin them up on the daily. You have the 348e series which is on intergrator the padlock is the g12 closed shackle padlock. btws 7x7 intergator and mtl300 they all uses the same pining kit. On my videos it explains this i hope this helps:) Also your using the wrong key the key you have is an open section which 0767 ( garrson) The function of the pin on slot 3 is to do with a patterning of the key blank so you can not duplicates keys. 🤓👊🏿
The integrators usually have a little "i" logo stamped on the front of the plug but it appears that it may not have received this treatment. That 3rd pin is an integrator pin. The oblong (oval) chamber obviously fits that pin and is an integrator chamber. The integrator line's purpose was to retrofit existing 7x7 Garrison systems and add extra options for key control and mastering. All while being backwards compatible as well. In all honesty, the most likely purpose for the integrator line was patent extension. Much the same way that Medeco has itterated slightly on their design, this small change would have allowed Mul-t-lock to extend it's patent on the Garrison 7 Pin dimple concept.
Judging by the key, it is indeed a Garrison. I have one as a Rim Cylinder and brought it from UK. I even managed to pick it before putting it into the door. Now the keys is entering a little bit harder, but it works fine.. =)
Merry Christmas too you and your family 🙏🎄. We thoroughly enjoy your videos. Your moderation is great. We appreciate you not using vulgar language class act.
A bath in a sonic cleaner will clear the grease/dirt right out. Follow that up with some dry lubricant or a lubricant of your choice and you can bring old locks to like new condition again.
Depends on the lock. If there's any plastic in the lock (or paint) I would avoid it. In any case, make sure you replace grease on any ball-bearings and lubricate the rest of the mechanism with lock lubricant, or a very thin oil.
Garrison or Integrator? I’m not sure as it’s like neither of the ones I have? 🤔🔐
Wonderful lock!!!
Great job on the restoration!!! So cool to have that back in service 😃
Also great picking!!!
🐈⬛🐾🐈🐾🇬🇧🍻👏👏👏👏
Thanks!
It's a Garrison, the Intergrator as an 'i' stamped into the front of the core. Nice picking Ash, that's one lovely padlock.
Is 7x7( I got) same as Garrison? Or you refer 7x7 to Garrison?
@@LockpickingMasta 7x7 and Garrison are pretty much the same lock.
Nice work! Glad you found some use for that lock. It was in pretty bad shape when I sent it out. It was likely used for some outdoor electrical/telephone box and the elements were not kind to it.
It was in a sorry state, but I’m lucky to be able to borrow from a donor lock and now it’s Great! Thank you for sending it to me 👍
Great open with some nice tensioning. I can’t wait to find a multi lock to try to pick!
Actually a good place to start learning dimple locks
I am a locksmith who picked mul t locks for years and pin them up on the daily. You have the 348e series which is on intergrator the padlock is the g12 closed shackle padlock. btws 7x7 intergator and mtl300 they all uses the same pining kit. On my videos it explains this i hope this helps:) Also your using the wrong key the key you have is an open section which 0767 ( garrson) The function of the pin on slot 3 is to do with a patterning of the key blank so you can not duplicates keys. 🤓👊🏿
Cool to see a padlock take a standard Euro format. I’ve seen SFIC and KIK padlocks but this is my first Euro
Yeah there are a few about but they are not too common
Well done Ash mate I've got one of these fun pick👍👊🇬🇧😊😎
Yeah totally are!!
The integrators usually have a little "i" logo stamped on the front of the plug but it appears that it may not have received this treatment. That 3rd pin is an integrator pin. The oblong (oval) chamber obviously fits that pin and is an integrator chamber.
The integrator line's purpose was to retrofit existing 7x7 Garrison systems and add extra options for key control and mastering. All while being backwards compatible as well.
In all honesty, the most likely purpose for the integrator line was patent extension. Much the same way that Medeco has itterated slightly on their design, this small change would have allowed Mul-t-lock to extend it's patent on the Garrison 7 Pin dimple concept.
Don’t know if locksport is for me, but I love watching your videos!
Judging by the key, it is indeed a Garrison. I have one as a Rim Cylinder and brought it from UK. I even managed to pick it before putting it into the door. Now the keys is entering a little bit harder, but it works fine.. =)
Garrisons are great fun to pick!
Merry Christmas too you and your family 🙏🎄. We thoroughly enjoy your videos.
Your moderation is great. We appreciate you not using vulgar language class act.
A bath in a sonic cleaner will clear the grease/dirt right out. Follow that up with some dry lubricant or a lubricant of your choice and you can bring old locks to like new condition again.
Nice, definitely garrison like the other vid you did with my pick that one time.
That was some time ago. Nice tool tho
@@LockNoob was fun making them, garrisons are my favourite 😁
Skills brother
Thanks!
wish i could pick a dimmple pick... nice pick
The garrison is a good place to start learning
That's the G47P
Just curious, can lock bodies or parts be soaked in degreaser, or is that a bad idea?
Depends on the lock. If there's any plastic in the lock (or paint) I would avoid it. In any case, make sure you replace grease on any ball-bearings and lubricate the rest of the mechanism with lock lubricant, or a very thin oil.
Worthless Security, a waste of money for this junk lock