RadioMaster Pocket - How To Set Up and Bind a Drone - Step by Step
Vložit
- čas přidán 19. 06. 2024
- This video shows you how to setup a new drone in your Pocket Radio and then Bind it to ELRS, and then configure it in Betaflight Configurator.
You can find the RadioMaster Pocket radio here:
www.radiomasterrc.com/product...
Follow me on:
Facebook: / captaindrone798
Twitter: / captaindrone798
Instagram: / captain_drone
****************************************************
BELOW IS THE GEAR I USE TO CREATE MY VIDEOS:
THE SOFTWARE I USE TO EDIT MY VIDEOS IS FINAL CUT PRO X
A-ROLL CAMERAS (without lenses):
Canon C70: amzn.to/3wnJzod
DJI RONIN 4D: www.bhphotovideo.com/c/search...
Canon EOS R: amzn.to/2W0qPq9
Canon M6 MkII: amzn.to/2n0ISiO
Canon XC-10: amzn.to/3sb9YTV
B-ROLL CAMERAS:
DJI OSMO ACTION 2: click.dji.com/AMlY5d2ucYWP3HL...
INSTA360 X3: www.insta360.com/sal/x3?insrc...
INSTA360 ONE R: store.insta360.com/product/on...
INSTA360 GO2: www.insta360.com/sal/go_2?ins...
INSTA360 GO: www.insta360.com/sal/go?insrc...
GOPRO HERO 11 (USA): amzn.to/3DKgAwy
GOPRO HERO 11 (CANADA): amzn.to/3E2SXAX
GOPRO HERO 10 (USA): amzn.to/3zIvWxM
GOPRO HERO 10 (CANADA): amzn.to/3EUzXmn
GOPRO HERO 9 (USA): amzn.to/3dlZasS
GOPRO HERO 9 (CANADA): amzn.to/30Ttmq2
GOPRO HERO 8 (USA): amzn.to/31BWboJ
GOPRO HERO 8 (CANADA): amzn.to/2MYs5WX
GOPRO HERO 7 (USA): amzn.to/2XXqeWv
GOPRO HERO 7 (CANADA): amzn.to/2Xjq6Vr
MOBILE OSMO POCKET2: click.dji.com/ABIkCjLwufxszCw...
ACTION CAMERA 3 AXIS GIMBAL: amzn.to/2DCrTJj
SOUND AUDIO:
TASCAM MOBILE AUDIO RECORDER (USA): amzn.to/2IKMr6n
TASCAM MOBILE AUDIO RECORDER (CANADA): amzn.to/2p3mExN
TENTACLE TRACK E: (CANADA): amzn.to/3rO11xY
TENTACLE TRACK E: (USA): www.bhphotovideo.com/c/produc...
ZOOM MOBILE AUDIO RECORDER (USA): amzn.to/3bHzh86
ZOOM MOBILE AUDIO RECORDER (CANADA): amzn.to/3sqFA5A
RODE STUDIO BOOM MIC (USA): amzn.to/2LqTzrL
RODE STUDIO BOOM MIC (CANADA): amzn.to/2XIX3s6
STUDIO VOICE OVER MIC: amzn.to/2TlTjJt
RODE WIRELESS: amzn.to/2LS2nqp
LIGHTING:
STUDIO LIGHTING (USA): GVM: amzn.to/35HcV2K
STUDIO LIGHTING (CANADA): GVM: amzn.to/3bG0kAD
STUDIO LIGHTING: FalconEyes SO-40TD: amzn.to/2N9pp7J
OTHER CAMERA GEAR:
Action Camera Hat (USA): amzn.to/2OFz5Hu
Action Camera Hat (CANADA): amzn.to/2NwT7Zh
Gorillapod 5K Tripod (AMAZON USA): amzn.to/368TFtH
Gorillapod 5K Tripod (AMAZON CANADA): amzn.to/2Tg3G39
Cool Orange Mini Tripod (AMAZON CANADA): amzn.to/2Xk5vNV
Cool Orange Mini Tripod (AMAZON USA): amzn.to/2X4JYsn
DRONE ACCESSORIES:
Lipo Batteries I use on most FPV Drones: genstattu.ositracker.com/1912...
Round Landing Pad: amzn.to/2HBqp2w
Square Landing Pad PRO SMALL (USA): amzn.to/3e9Us2c
Square Landing Pad PRO SMALL (CANADA): amzn.to/3BQou5Y
Square Landing Pad LARGE: amzn.to/2nukqqH
================
#RadioMaster #Pocket #FPV #HowTo #captaindrone - Věda a technologie
You are the best CAPTAIN
Very clear and easy-to-understand video keep it up, Uncle
Thank you 😍
Thank you!
I have watched a ridiculous number of videos trying to learn about this stuff and so far you are the best I have found. Better than JB who I do like.
Thanks! I try to keep every Short, Sweet & Simple in all my vids.
Thank so much man for the very easy to follow and detailed guide
This is why we all subscribed to this channel. Simplicity at its best 👌.
Wow I just spent 24 hours solid trying to get my Pocket to work with a NANO ERLS module and couldn't as it appears it was in some kind of training mode.
This video gave me enough info on what I should be seeing to actually end this madness. lol
For this I am greatful... you made the world a better place!
Excellent!
could you help me out? I've been stuck aswell it hasn't worked for me.
captain drone explains better than my math teacher
Thanks!
a very useful must to see video for any buyer for this new tx .. thanks as always 👍🏻
I'm absolutely clueless on Betaflight but this video does break down many of the myths regarding set up. I have the old Jumper T8SG radio on deviation but the Radiomaster with Open TX looks a great option. Thank you for this video Steve.
Glad it helped
perfect setup video !! cant wait till monday hopefully weather doesnt mess up shipping time
Excellent Tutorial Video. Thank You Steve.
Just bought this radio for use with a Mobula 6 ELRS. I'm as excited to get the radio as i am to get the drone. It seems like a banger of a radio for the price.
Thank you so much! This video is very concise and really helped me to setup my new Pocket. I got it all setup and paired with my new Heewing Hunter RC airplane.
Glad it helped!
When i cant connect. Always fall back to this channel thank u.
Very good instructional video. Thanks for this video, it will be easy to follow for us newcomers to the sport. 😊
Thank you for the step-by-step guide. Thank you for this video Steve.
Glad it was helpful!
Thank you! You're the only one on CZcams who took the time to do this. Much appreciated from a newbie like myself.
Glad I could help!
Great run through - thanks!
I bought the cc2500 version of this controller so I could use with my frsky drones and this video definitely helped with the only difference really being the binding process which you simply do within page 2 after turning the internal rf on and to frsky d 8 for my case there is a bind/bnd option there on page 2 that after the drone is in bind mode you simply click bnd on page 2 that’s it well of course after binding go through bf like cap shows here. This video definitely helped and saved me some time so very much appreciated cap as always a great video and very informative.
Glad to read it was helpful
Amazing clear instructions! You deserve more likes and subscribers. Thanks, man.
I appreciate that! Glad it helped.
great review captain
Thank you so much.I'm really worried about how to set up and bind this rc in the first time.I hope you can make more video like this for beginner like me
Super Helpful thank you sir!!!
It drives me bonkers that this radio got full size 18650 when the zorro got those little baby batteries 😡😡😡
Very true
I'm still surprised no one's introduced an internal battery mod to alleviate that particular problem!
At vaping i even have 21700 LiIon Batteries, so 18650 isnt even fullsize 😉 and i am sure there are even bigger LiIon Batteries 😮
I have some lifepo4 that came from transformers i put in my power wheelchair lol works amazing now!@@Eckus
Thank you very much! Greetings from The Caribbean.
Are winter season is coming so the Caribbean sounds wonderful
This got me started, thank you!
Glad to hear it!
Thank you for the step-by-step guide. This was so helpful because I was going bananas. The only other thing that I would add is to upgrade the Sim card that’s in there. You only need a super small one like a 16 GB because my SD card failed with the one that came in the box, so I had a little bit more of a learning curve.
Is there data that needs to be transferred or just swap when new ?
i am excited I just got this remote.
This tutorial saved me hours of trouble shooting. Thanks for the good video.
Excellent!
Very good tutorial Steve.
Many thanks!
Спасибо, дорогой! Обнимаю, как брата! Удачи тебе и здоровья! Thank you, darling! Hugs like a brother! Good luck and health!🤝
Anytime i want to know some about a drone you are my go to for information 1st
Thanks so much captn! Got my pocket elrs coming soon after a day of frustration with a taranis qx7 and a module lol never again
Thank for this video
Wow thank you for that realy helpfull tutorial 👍👍👍😉
Glad it was helpful!
Thank you for this video, very helpful.
One question. At 3:10 when i go back to the main dashboard i see a blinking value -6.36 instead of 4.39 as in your case. Also there is no reset flight menu when i press the scroll wheel. What might be the problem in my settings?
Very cool
Newbie here, I bought this pocket controller and I am having trouble getting it to work. Great video by the way, I followed this video step by step and I was able to connect to the receiver but nothing works. I’ll try again by connecting to express LRS software to see what happens
Well Done!
How about changing default switch positions warnings?
Great easy to follow video ,what drone are you using In the video ?
Hello, good day, excellent video, I bought the RadioMaster Pocket to bind all my drones, I managed to bind my Pavo20, but when trying to bind the CetusX I followed the steps and I have not been able to do it, I want to know if this is compatible and perhaps explain what the CetusX bind process with RadioMaster Pocket, thank you very much for your help
Hello Captain Drone. Can the Meteor85 be connected to the RadioMaster Pocket? I mean, do both ELRS protocols have the same version? If not, is it possible to update the quad receiver software?
I have the same drone and radio of course but my timer doesn’t start on TH% until the throttle is used and then I’m stops when the throttle is down. Also does your Flywoo beep? I trted to setup a beeper on mine and doesn’t work.
Thank you so much for the support. Alone i will never do it hahaha
Hiya. This video seems pretty well put together and it helped me with one issue im having but im wondering if anyone can point me to some advice on setting up a fixed wing plane profile on this remote.
I’m really interested in this transmitter. It seems simple, easy, and effective. I saw it one a recommended RC’s for low budget and it’s only 70$. Is it compatible with the flywoo Cinerace 20 v2? U might remember me from another video lol.
im dont speak english as well as i want, but your videos are simple to understand even if you dont know english language well!
Thank you!
It works👍
NICE
Thanks!
Thank you!
So normally I set aux switches on radio 1st... this way all done in beta? Thanku.
_thank u captain❤❤❤
thank you for your video, it has been very helpful for me as a beginner in FPV drone. I tried following the steps you provided, and it worked. I have another question. Do you have any advanced videos on connecting the drone to goggles?
There rarely are videos regarding connecting FPV goggles to the video output of a drone because it is super simple. If your goggles are ANALOG, you simply scan for the band & channel. If your goggles are digital, you simply press the bind button on drone & goggles.
Just ordered the Pocket and ERLS rx quad. Beginner. Just playing around with a micro FPV indoor 1s quad with non-Betaflight FC. Thanks for the video tutorial. Question regarding the mode switch. Can it be set up in reverse than what you demonstrated? That is, SB-up as Angle mode, no change for Horizon mode, and SB-down for Acro. Betaflight Configurator supposedly gives you the option to set up "Rate Profile Settings". Would like to set up an "indoors" rate profile. Throttle limit, expo and control(Roll, Pitch, Yaw) expo, max rates. Possible to set the custom rate profile to another switch. Basically a Angle and either custom active or off. If possible might use the remaining 3 way and add couple custom rate profiles to link with Angle Mode active on SB.
You can do pretty much everything you mentioned
Captain Drone, can you make a video showing how to setup 2-stage arming of the Pocket? I can't find anything like that on YT. Just saw a FB post of some poor bloke that cut himself pretty good with an accidental arming,. Thanks!
Hi Captain 🫡! I was able to connect one drone 😀. I flew my Meteor75 pro hdzero this afternoon for the first time! So, if I want to add other drones, like my tinyhawk III, it’s the same procedure that I just have to repeat? Thank you so much for this video!
Excellent! You on your way to FPV stardom. To add another drone you simply go to the main menu that lists the models from top to bottom, then select your existing drone, select duplicate, and once duplicated, select the new version and change the name and then bind it.
Thanks for your time Steve it's very helpful . What drone are you using to bind with the radio?
I was using this one: czcams.com/video/bV4HbVrKV_M/video.htmlsi=3_L9mudVNPLiM0n0
@CAPTAINDRONE798 Great.!! Thanks Steve.
Will this radio bind to a TH freestyle 2?
Hi. what are the difference of binding your drone using the quick battery thing, compared on using betaflight to bind it (besides faster). will it harm my drone?
In the RC hobby 99% of people bind ELRS using the quick method. Using the software method simply allows you to add a binding password.
Thanks for this video explained really well. I am new to this radio system or protocol. I have a question to ask you. Why when you enter the expresslrs location you notice the name of Radiomaster Zorro and not Radiomaster Pocket like mine? I bought this radio a few days ago, do I have to update the firmware? Unfortunately I haven't been able to bind anything yet. This is the second radio with integrated expresslrs that I've bought, the first time I sold it out of desperation. One of these days I hope to bind a tinnywhoop.
My POCKET RADIO shown in this video is a pre-release version sent to people in the RC Hobby to test and evaluate so mine has older firmware in it.
Thank you!
Anyone help with connecting radiomaster pocket to moblite7 hdzero frsky? Suggestions for fc software versions, etc. I've tried everything, I need help
Is it possible to conect the Elrs Radiomaster Pocket with the Tinyhawk 3 Plus freestyle(analog and not HD Zero)?
Please be aware that ELRS Radios can connect to an ELRS Receiver as long as both are on the same firmware number and both are at the same frequency. This means you really need to know what receiver is in your Tinyhawk 3 Plus Freestyle.
Thank you for making this tutorial but I want to add that the timer is best to use mode: ON (started when activated and stop when deactivated) or Ths (started after throttle is raised and switch activated) but to simplify ON is better.
Using Th% really not recommended and will ruin your time. At my early flight I am using Th% following your guide and I depend on my TX and not paying attention to OSD for when I should land and the battery dropped till below 3 V and VTX die.
Th% could count double your true flight time. And honestly I dont understand why did you recommend to use Th%. ON is easiest for everyone.
Thank you for the excellent video. I have a Mobula 8 that I can't bind. When I insert the power cable into it, as you instructed, it doesn't beep multiple times and can't bind... Any thoughts? Thanks again.
Power cable? Power cable as in a battery cable? If you are talking about the part where you plug the battery in 3 times on a drone that has an ELRS RECEIVER, then the drone MUST make a series of tones when a battery is plugged in. If not, then it means your battery is dead or your drone is broken.
@@CAPTAINDRONE798Thank you so much for your time and help!
blimey gone brain dead watching you tune the radio as i'm not very tech minded ill ask a friend for help great review as always Captain.
Thanks so much Steve .. Really appreciate your tutorials … Just bought the Non ELRS version.. I’m thinking due to the price buying a separate ELRS controller.. Or is the Nano Ranger a better option.. From one of your Irish Fans from across the pond 🌊💚😀👍
The pocket exists for the purpose of being compact. If you want something different/larger then the Boxer is your next option. Pocket uses Nano modules on the back and Boxer users Micro modules, so if you purchased the Ranger module it would not work with both.
does this support BLE Joystick too? 🎉
How do you select NO switch for timer settings? I accidentally scrolled the wheel while on that setting and now there's no option to have no selection even though the manual says "[Switch] - Select the switch that will trigger the timer to start. If no switch is selected, the timer will trigger based only on the configured mode."
Whats reciever module you use in your drone? what model?thanks
ELRS
Captain, I do not know if you fix or upgrade your Drone, If you do, can you send me a list of all I will need to be able to do that with whoop drone not DJI. I will really appreciate. Thanks
I should have watched this video first.lol. Another concise and clear explanation. Are you a teacher perchance?
I was an instructor at some periods of time in the military.
@@CAPTAINDRONE798 shows you have taught before. one question my drone will arm with the radio but when I connect to betaflight i am not getting any response when I move my sticks. i know I am doing something wrong just not sure what. i wish I had someone near me whom i could ask questions of but I have not found anyone as of yet
The plugging in and out 3 times to activate bind mode, does that work for all drone? dosent seem to work with my pavo pico
Only works for drones with a dedicated ELRS receiver that you can see with your eyeballs. My guess is yours doesn’t work for two possible reasons:
1. You’re doing the process wrong
2. You’re drone is ELRS SPI which means it won’t work the standard way and you need to bind it via Betaflight configurator
I want to connect radiomaster pocket CC2500 with Rx radiomaster r81 but don't know how to connect
Buongiorno io o preso la radio master pocket lrs volevo sapere perché non riesco a fare la Bind io o un EMAX Tinyhawk 3 plus Freestyle HD
Just a heads up, I just got my Pocket and the timer didn't automatically start after that initial configuration (before setting it to the arm trigger). It would only count down if the throttle stick was actually engaged (not at the bottom). I looked it up and TH% means the timer counts down in coordination with your throttle. So at fully throttle it counts down normally, at half throttle it counts down more slowly, at no throttle (stick at pulled all the way down) it doesn't count down at all.
I'm assuming this is because the version of EdgeTX that shipped with my radio is a newer version.
I have the same issue, does it work following the same steps or I need to do something else ?
@@dand.1941 yes, following the same steps all work. Just a few minor differences on what the radio does.
I guess I don't understand the need for a timer at all. Is it important? It's number one in this video. Please excuse my ignorance. I'm not trying to be a smart alec.
@@Sonic_Ox I think it's a useful reminder so you don't have to monitor the battery voltage constantly.
Thank you ggochalleng. That does seem helpful if you know about how long your typical flight time is. Say you have a quad that typically flies about 10 minutes with a certain battery, a certain flight style, under certain conditions like wind... you could set your timer for eight or nine minutes knowing you should be looking to land when your timer beeps. I guess I'm just accustomed to monitoring my voltage and never thought to set a timer. Thanks for the reply amigo.
Hi i want to use the pocket with FW 3.3.0 with a Beta Meteor 75 pro, but im not able to bind them, the elrs config give me no chance to create a fw for the RX which fits ... which way could i go ?
My guess is your old Meteor is on ELRS firmware 2.x and your pocket is on 3.x. So you either have to upgrade the Meteor or downgrade the Pocket. I can’t recall but your Meteor could be ELRS SPI (you’d have to check). ELRS SPI is different process to upgrade/downgrade.
hola consulta mi pc no reconoce la radio al conectarlo si me puedes ayudar aparece en en el administrador de dispositivos pero con un signo !
I just got an newbeedrone acrobee65 and im trying to get it to pair to my radiomaster pocket controller. First issue i ran into was on the setup screen the internal RF only had off and multi. I read on some reddit threads that in the hardware menu for the system i can change the internal rf to crsf. So I did that, and now trying to load the expressLRS its just stuck on the loading screen. Any ideas?
Yikes! You bought yourself a MULTI-protocal instead of an ELRS. Do you know what type of receiver is in your acrobee65?
@@CAPTAINDRONE798 Per getfpv, its got Crossfire Nano receiver with MINIMORTAL T Antenna
this might seem like a dumb question but: what voltage do you use for charging the batteries through the USB-C port?
The radio will adjust the voltage to a safe level
@@CAPTAINDRONE798 oh, good to know. Thanks for the reply!
Hi, any chance you know how to show the drone battery voltage on the radiomaster pocket ? I can’t work out how to do it, also when I press the telemetry button I just get a syntax error, I have the right lua script on the radio, this is a major frustration lol
Normally if a receiver has telemetry (most don’t) then your radio picks it up during the bind process.
@@CAPTAINDRONE798 I have it from all my quads on the tx16s but not on the RM pocket
Is RP2 V2 ExpressLRS 2.4ghz Nano Receiver compatible for this?
If you get a 2.4 ghz ELRS Radio, then it means you need any type of ELRS 2.4 ghz RECEIVER
good morning I got the master pocket lrs radio I wanted to know why I can't do the Bind myself or an emax Tinyhawk 3 plus Freestyle HD drone
ELRS transmitters only binds to ELRS receivers and both must be on the same FIRMWARE
si ma entrambi sono ELRS scusa se o scritto male prima sia il drone che il radiocomando sono ELRS
yes but both are ELRS sorry if I spelled it wrong before both the drone and the remote control are ELRS
The radio control settings must be the same as those you set, even if it is either a drone returned by you or an EMAX Tinyhawk 3 plus Freestyle, even the minutes one because you didn't set it
you can bind it with also ELRS 2.4
Can you please show how to set up this radio for a plane?
how to do for frsky meteor65 pro
hola - bind con helicopter goosky s1 gracias
I push in the scroll wheel to reset timer and itdoesnt pop up a reset option. Also my time is in the negative?
You're possibly in the WRONG screen. Hit your RTN key a few times to back out of whatever you are in.
Hi, beginner here. Can I bind this remote to mjx bugs 8 pro? Or do I need something else to make it possible? Thanks
Did you find out a solution to the Bugs 8 pro? I have the Jumper 4in1 external rf module, it has a Bugs option, however, I was not able to get it to work with My Jumper T16 running Edge software. I know this is an older post, thanks for any feedback. I am leaning to get the ELRS Ranger micro module for the Jumper T16, but also considering the Pocket by RadioMaster
for just ELRS not much of a price difference. Conflicted on choices
Captian Drone..Great presentations enjoy your channel
@@bobflyer4346 technically it could be bind with bugs module on jp4in1. but radiomaster pocket has limitation for the older module. it would be great if you work on ELRS instead.
I use jumper tpro right now, and never has a chance to bind on bugs 8 pro. because my bugs ESC already burn and the motor are broken! :D the fc is also not good enough to handle big ampere, that's why its wobbly while fly in high rate. if you work with a lot of drone, your T16 still good to go. if you consider to work only on ELRS, I think pocket is match. for me, I like silly drone, that's why I take Tpro with jp4in1 lol. hope this anwer!
What simulator do you recommend for this
I don’t use simulators for FPV so can’t help. Go on the STEAM network and you’ll find simulators.
Hi Captain 👋, can radiomaster pocket band with dji avatar?
Nope, for the simple reason that the AVATA has a DJI RECEIVER, so only a DJI product will work with it.
A point worth noting..... Many drones don't require that the battery be plugged in to connect to beta flight.
For digital Vtx's it's important to keep them cool during this process if a battery is needed.
But in most cases like on these small flywoos a battery isn't required
здравствуйте. аккумуляторный отсек подойдёт для батареи толщиной 65мм и длинной 650мм?
The battery area is designed to fit an 18650 battery. Have a look at the dimensions of an 18650 battery.
Will this tx work with tinyhawk 2? Thanks for the video :)
It depends what receiver is in the Tinyhawk 2.
@@CAPTAINDRONE798 I think it’s a D8 if that means anything to you 🤷🏻♂️ this is all new stuff to me, I’m just looking for a budget but better TX to replace the rubbish rtf version the freestyle 2 comes with
@@Ps5_ggamerD8 means you need a 4-in-1 model radio
@@CAPTAINDRONE798 okay mate thankyou dropped a sub :) keep up the good content 💚
I'm a new player in drones. I have SJRC F22s for 6 months i would like to know if it is possible to bind with ELRS remote controller?
Nope. ELRS only binds to ELRS, and there is no ELRS in the SJRC F22s. ELRS is a LONG RANGE receiver.
@@CAPTAINDRONE798 Thank you for your reply. Another question, so if want my SJRC F22s to have a new controller that can go a longer distance what can I do?
@@samcho882You can’t. Drones with cameras and GPS that come in a box with a remote can’t be modified.
@@CAPTAINDRONE798 Understood thank you for your answers and help!!!
Bro can you share build video of drone
Elrs loading screen froze went to internal turned it on but don’t have
crfs option
Hay guys , i just purchased this controller , but abit confused what elrs reciever to buy? Witch one do i need please help
You have to buy the ELRS receiver that matches the frequency of your radio. So either 2.4 or 915.
@CAPTAINDRONE798 legend nice one 👍 keep up the awesome content watching from UK
What receiver did you use?
ELRS can only use an ELRS receiver
Hello, after setup up and binding, all ok, but when I would like to connect to PC, don't work. In Betafligh can detect, but in simulator programs don't detected. Could you help me?? thanks!
Power on the Pocket. Plug a USB into your computer and other end into the Pocket. Select JOYSTICK on the pocket display. That’s it, all will work. If it does not work then the reason is simple. Either your computer is out of date or you have not figured out how to use an external USB remote in a simulator program. You’ll figure it out.
Thanks for the quick response. I figured out that the issue was with the Steam configuration, and it wasn't set up correctly. Once I disabled the generic controller support, everything started working.@@CAPTAINDRONE798
Do I need to set up betaflight even if im only going to be flying in acro mode?
Yes
@@CAPTAINDRONE798 Thanks, Im having literally so many problems and I finally found out why, the micro usb cable I was using was charging only so now I have to spend more moneyyyyyyy yayyyyyyyy