1:64 scale 3D Printed Race Car Transporter
Vložit
- čas přidán 6. 09. 2024
- My Amazon Tools List - www.amazon.com...
Today I paint and detail a cool 1:64 scale Race Car Transporter that I 3D Printed parts for!
◄ DISCOUNT CODES ►
Starbond Glue Discount Code JIMMY10 - Gets you 10% off non expiry
starbond.com/?....
◄ TOOLS & SUPPLIES ►
Most things we use can be found here.
www.amazon.com....
While shopping for hobby and paint at SPRAYGUNNER.com please use link: spraygunner.com?aff=21
◄ XMC RACING ►
Our Diecast Racing channel:
/ xmcracing
◄ SOCIAL MEDIA ►
Instagram: @diecastresurrection
@xmcdiecast
Reddit: / xmc_diecast
◄ DECAL FILES ►
imgur.com/user....
◄ 3D PRINTING FILES ►
www.thingivers...
DISCLAIMER: In this video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
Music Licencing by Artlist
Song:On-the-way
Artist: ian-post
#Custom #Diecast #Createxcolors #Starbond #Spraygunner #Diecastresurrection #Hotwheels #Matchbox #Restoration #164 #Vintage #Redline #3DPrinting #jadatoys
I should have the mic settings dialed in for the next video, after hearing the levels peak on this vid. Leave your ideas here for transporter improvements! Have a great day fam.
Sounds great to me. More crisp.
Its not bad, everything recorded a bit loud and I had to turn it down throughout the vid. Next time for sure!
Freakin love it! Your channel is rockin hard. Well done. Oh, and feel free to print Jimmy in sitting and other poses. :D Oh, and I'd love to see more of your design process. I'm hoping other do as well.
Blub blub blub sounded great whatever ya did lol.
Impressive Austin 👏👏👏👏🍺🍺
Here's an idea, 3D print your own drag strip. Announcer booth, grand stands, concession stand, bathrooms, the whole diorama. It's within your power... maybe even make Jimmy an entire trailer park... just throwing it out there.
Jimmy for trailer park supervisor
Wait... could Jimmy be cloned via 3D prints and thus achieve godhood and be able to be at two places at once? Too much power!
he could totally 3D print empty beer cans and broken meth pipes for jimmys trailer park!
Great idea !
Would be super cool!
I would like to see a short video of your entire collection! All the vehicles you've done, and the ones that are in the works! Great work with the 3D printing, cheers from Yyc!
That turned out bada$$ looking. Awesome job. Thanks for sharing. To the people that put thumbs down. You got to be jealous. Because he does amazing work.
Seriously just had that thought. Who can dislike this?
It’s good that you are using that 3D printer at it’s full capacity for detail good job!
This work is amazing and I'm sitting here printing dragonball and warhammer stuff... not using the potential of a printer at all...
That is awesome , a 3 D printer is just great for this hobby . Transporter came out great . Mike Espo.
This looks great!
For me, I would add/change 3 things:
1. a red pinstripe between the gold and the black
2. the top of the bed looks a bit unreal now in gloss back it's just too shiny, perhaps flat black would look better
3. add some decals
That turned out brilliant I'm definitely impressed by the 3D printer. You are correct about the cab overhang being to long by law the overhang cannot extend past the windscreen. It still looks magic tho. 👍
@@carmineredd1198 no lol. I will explain I've built trailers to get them registered by law there are requirements. The cab cannot extend pass the windscreen therefore for you to make your trailer look authentic it would be better if it was shorter. Of course you can make however you choose. It was just a thought that's all - no offence intended. 👍
You should build an entire car from 3D printing. Like a Plymouth Valiant from Duel or something, since I've never seen one of those in 1/64
You should try doing a semi truck and a big rig tow truck ....I'd love to see that done .....oh by the way how much does a 3D printer cost kind interested in getting one... thinking maybe pick that up as a hobby ....be like you bro.... great job on the video bro ....I LIKE IT 😁
Friggin awesome, granted there are a lot of talented builders out there but you Sir hold wizard status and super entertaining to boot . Definitely one of the top channels I look forward to watching 👍👍😊🏆
Thanks man, that means a lot! 🤜
🤛
Awesome. Now if I could only afford a 3d printer.
WOW. A homerun. You make these look easy and I am loving the 3D printer work. Opens up a LOT of possibilities for sure. Thanks.
came out beautiful. Looks like it was made in the factory. Actually better than what the factory could do. Great job.
Thanks Wade, needs a little fine tuning but they should be pretty cool!
My dad used to collect and do some light mods to hot wheels he passed in 2002 and you sir remind me of him and I just wanted to tell you thank you for taking me back to memories of helping him do them.
Mavalous absolutely mavalous
Totally love it Austin! Old skool hauler, need to put a couple little " Not for Hire" stickers on it.
Love the new 3D printer ! I’ve never been a big fan of the filament printers, it’s just melting plastic line on top of itself - not the cleanest process to me. Most of the resin printers I’ve looked at in the past have been outrageously expensive, but I think I could actually swing the one you’re using. I’ve had ideas for prototyping product components over the years, but haven’t had a way to make them without spending hours or days in my garage fabricating something. With this I could print scaled down models in no time. Excellent product ! Keep the custom builds coming 😊
AWESOME VAto.... U crack me up with the sound effects, keep em coming!!!!!!!!!!!!!
So I'm not really a diecast/Hotwheel type of guy, but I really enjoy watching the work that you do. Just wanted to tell you how much I appreciate your channel.
For the ramps, you could try slots on the rear of the body, and make them slide out with stops to keep them from coming all the way out. Great work with the printer! Can't wait to see what comes from your brain, when you get more time with it!
Now that my friend...is very cool!!…..great job on this one...It's "Golden"
3D printing has added a whole new “dimension” to your already outstanding channel. Well done.
I feel like I’m nitpicking because it came out awesome and I could never do anything close to this nice but I do think it hangs over the cab of the truck a little bit too much. It’s fantastic. Bravo kid. Keep up the good work.
I think it's awesome you share your 3d print files with everyone. Say alot about how good a person you are. A lot of people would have just printed stuff to sell instead. You made a fan out of me long before any of the 3D printing keep up the awesome work love your channel
You could pop off some printed toolboxes (little reds and diamond plate bed boxes), Maybe some pallets to haul, firewood, or just truck bed junk. There is always this one guy that just has stuff in his bed, there are beer cans, gas cans, and other trash. Cinder blocks to put your "project" car on in the yard for the next 25 years.
You will also be able to do body kits, reprint the bottom of the car but with chin spoilers and side skirts. Spoilers, convertible tops, interiors/seats. Getting a clear as glass print is crazy hard and requires a really good printer.
At one point you could just make the entire car.
Well done and great design! Glad you finally picked up a printer. They are invaluable for miniature modelers.
Shorter cab over, storage doors to cab over, Smokies logo on front of the cab over and try heating up a needle to make the holes for the ramps then glue to L shapes to the lower deck that are in the ramps. (Small Paper clips) hope this helps
The overhang is perfect. No need to change it at all. Beautiful job. Would love to see more custom stuff. Like maybe a future flying cyberpunk hotrod.
Try 3-D printing a 1/64th scale dragster with some big old booties for rear tires.
You will have to make the upper part of the motor with the blower on it too.🔥Do something craaazy!!! I love your transport truck now!
I think a live stream 3D print video is a great idea! I love the way this turned out!
I love the sound effects for every build you do lol amazing vids by the way
Have you ever done this before? How about do one of these? All great ideas, but can we please talk about how 3D printing elevates modeling to the freaking next level. Can you imagine explaining to a modeller in the 70/80/90's that one day soon you'll have the ability to scratch build kits of your own design at home in a matter of hours. Unbelievable! If anyone knows of someone making these in metal I'd love to hear about it. And as always, bud you are awesome! Michael from Toronto.
I would be very proud to take that rig to the track. Very nice. You got that 3D thing going on!!!!!!
All kinds of potential. I can see 3D printing some cool 4 tip side pipes, engines with blowers, custom hood scoops, wings, smoke stacks for a lil' red wagon dodge pickup but the real goal would be wheels. We need more wheel options.
Very cool build 👍
I would put the car a bit deeper into the bed and possibly make sides at an angle so it just shows the back half of the race car. Makes for more decals etc for a more race look 👍
You are so freaking amazing with your work. I have been wanting to get into doing resto’s/Customs. Watching your videos just makes me want to even more. Keep up the amazing work you do and keep the videos coming.
Dude! That thing is frickin awesome! Great job! I want a couple dozen of those!
Only one suggestion. Gold rims on the hauler to match the car...nice job. Really nice!
If you could figure a way to slide the trailer axles forward, the ramps won't be needed as the back of the trailer goes down. You have the skills. Mirrors and exhaust pipes on the cab too. Great looking unit and love watching your videos.
The gold matches the gold lettering on the cab, so I think it works just fine!
That truck has the wow factor. Awesome build.
that turned out sweet, very creative, I like that you can make something out of nothing with 3D printing, I would suggest moving the rear axles forward a little so the load is over the axles, this would be more realistic to actual car haulers, you might have troubles trying to turn rig like this around
idea for adding ramps now, use brass tubing that you would use for axles for the hinges, the rod to connect ramps to truck bed could be hot wheels axle or sewing pins. glue the brass tubing to the bed and ramps and boom. no drilling.
Live stream while designing something would be awesome bud. Again another great video thanks for sharing
So you had mentioned ideas about future designs. So.....rocket powered apocalyptic pick em up truck....or Camaro.
I know pin stripping something so small is next to impossible but it would make all the doors and extra stuff you added pop out. Looks awsome anyway!
Such a good job on this, love it!
Diamond plate the big doors on side of cab. Awesome build
Sounds way better. Awesome job!!!!
When you're adding a drop shadow less is more, also set the spread a bit higher so it doesn't have that stark line around the image.
Man where is the ❤ button?
I love that truck . Best car hauler I've ever seen!
Love your work
This hauler is outstanding. Great concept and design. Love it.
Now, how's about printing out that friggin' missing bumper for that big trans am...perhaps..?
Wowser thats already cool as. I think the overhang could be a bit larger with a window access hatch for sleeping room over a twin cab. A winch detail could be good and instead of messing with hinges try a slotted rear with a hook on the ramp, keep up the good blubs
Jimmy's on the turps again flippin picnic tables like a BOSS. 👍
M2 has some great cabover trucks, believe they have at least one for each of the big three, Chevy , Ford and Dodge I've got a Dodge I'm working on don't have a printer (yet) but thank you so much for posting it means a lot to the fans
You know I've got a little ultrasonic cleaner. The cars that I have tore apart I put in there and I put some denture cleaner powder in it because it won't hurt the plastic it actually does a pretty good job. I mean I put all the plastic parts in it and the wheels too strong, it actually won't hurt the car at all so you could actually throw the whole thing in there if you wanted just cleaning.
The whole truck is awesome looks great I Would not change a thing😎👍👊great job l
Thanks Kevin 🤛
I would love to see you take a newer style truck cab and cut it down into a cab over like the ones from the 50’s. Sort
of a retro design and use it on a car hauler. I really enjoy your videos and your creativity.
it looks great. you should try and make the ramps pull out from the rear off the truck, that way they are all ways attached and you don’t need hinges. overall it looks sweet
I love it that you are creating unique vehicles, makes a nice change from just restoring, I'm v.impressed.
I'm not as big a fan of the 3d print stuff, as far as the model-making stuff goes, but I do enjoy the build-outs as you refine the details and get stuff to fit... so maybe it's a wash? Still entertaining as always and always a pleasure to see you work through the challenges.
It would be nice to see a 'full lenght' truck, like the ones made for transporting lots of cars. Today's design was awesome by the way.
I learn so much from watching you. Bring back many fond members of my childhood and sparks my imagination
I admit that I like the restorations better but, holy carp, you are good with the CAD and the filament! I think Mr Yunick might have appreciated the homage to him.
Also, I have to say, that's one damn long drive shaft.
I do what the analytics tell me!
Hey DR. You need a crew cab on front.
You are doing a great job with the 3D printer. You are way more creative than I am.
He is the Chip Foose of the diecast world.
A major improvement over the last 3d project. Looking forward to seeing what else you come up with. Keep it up champ!
That looks fantastic! Next challenge build a custom car from scratch 3d printer style! maybe a funny car or a dragster with the parachute package on the back? Love what you are doing!! Oops didn't see Adam Spradling's post basically saying the same thing! Great minds and fans of Diecast Resurrection thinking alike!
WAY COOL.... You did an amazing job!!! Thanks for showing and sharing. You D Man
A ladder on one side and a spot for a few lawn chairs up top so pit crew can watch the races from up top would be pretty sweet
“Clearance Markers”. I’ve always wondered what those lights were called and what they were for. Thanks !
A road train cab over with a cow catcher on the front, couple of trailers maybe.
Heck yes! Also a couple of cows to put in the trailers?
Great little set! Kinda crazy you can build your own toys. How about doing a custom 3D printed body?
The only hard part would be designing it. I could probably do a flat fender jeep pretty easy if that counts.
Have you looked into making your own stickers? You’re already proficient at 3D printing, stickers couldn’t be too much harder. You talked about waiting for stickers in this episode, just my thoughts.
Came out awesome . I love seeing those 3D designs come to life .
Pretty sweet hauler chassis! Thanks DR.👍🏼🤘🏼😎
Wowzers, you did a great job, beautiful!....... What else can one say but EXCELLENT...👍
Transporter is a good idea. Looks better than factory made. Good Job. 👍
Repaint the cab and car to match the gold stripes,hell yeah 🤘👍
If you ever have a leftover truck can you should totally make a rat rod with a exposed engine and rear frame. I don’t know, but I hope you like the idea!
Thats pretty impressive! Can you 3d print molds to make your own rubber tires? And, obviously, print your own rims, engines, etc? Maybe 3d print a giant Jimmy!
Two blubs up from me. Fantastic. 👍👍
Awesome job amazingly fantastic well done Cheers KC Tasmania Australia love to buy some of those bodies any chance?
Awesome build my friend ....you asked about little things that could be done.... sponsorship and ownership badges but all in all love it and yes to all who thumbs down must be jealous.....
I Do, I Do want...na Need to see more 3-D printed items like this! I have tons of ideas...! Guess I’ll need to invest in a printer now.
You never cease to amaze me brother! The creativity is abound. I'm loving it all bub! That is BOSS!
Very nice keep the creativity coming. I dig it. Can't wait to see that cab over.
Matching wheels all around!
Man that hauler bed turned out great. Didn't take you long to get it figured out. Great video.
Looks good! Just got in my elegoo mars. So far just printing pre made models to get a feel for settings and such before I start designing things.
Super cool race hauler! Three blubs up in a J formation lol
To me the overhang is perfect 👌
For the ramps, instead of hinging them, why not print up ones that would just sort of sit on the ground at trailer height, then work out like a storage cubby on the trailer itself, then just color match. For the scale they might be sturdier that way too with the 3d print.
This is awesome, I'm excited to see what other neat things you can conjure up in the future.
add a big ol' 3D Smokey on the front for some pop!
Much enjoyed!
I look forward to asking my son to print something for me!
Hehe, your work is wonderful, cheers
That looks awesome. I think a dually would look awesome as well using a hodges custom bed
Awesome as always !! And by the way I and I'm sure many others of us out there really appreciate your willingness to help us with out chargeing us. It shows that you have a passion for the hobby beyond just trying to make a buck all the time. Pay it forward is a great thing , and without question if there was a time in the future and you needed to we would be right there for you. Again thanks for being there for us that aren't always able to get the money together. Love your videos and talents. Yes as soon as I get can get the funds I will be buying one of your very cool shirts. Thanks again.
No problem at all brother, the reason im willing to give those away is because I never see myself using the same model twice really. always improving my own stuff.
Something like a 5th Wheel Trailer would be Awesome 🤘