Bike Crank Removal and Installation - Three Piece Crankset
Vložit
- čas přidán 30. 03. 2022
- #bikehowto #bikerepair #bike
Buy the tools you need here:
Crank Puller: amzn.to/3Ls9GhP
Park Tools Crank Puller: amzn.to/3Dy0yFS
8mm Allen Wrench: amzn.to/3qOdn9G
Park Tools 8mm Allen: amzn.to/3iLFMsK
17mm wrench: amzn.to/35op2oe
Mini Grease Gun: amzn.to/3wRrhfg
60nm max Torque Wrench: amzn.to/3uFMLce
25nm max Uniche Torque Wrench: amzn.to/3uEVVWk
Thanks for watching:
I hope you enjoyed this and will come back for more.
Become a Member and Help Out My Channel: / @runbikemike
Follow Me @: www.RunBikeMike.com
Swag: www.teespring.com/stores/runb...
Patreon: / runbikemike
My Video Gear: runbikemike.wordpress.com/gea...
Trail Maps: www.teespring.com/stores/trai...
Popular Playlists:
Build Time Playlist: tinyurl.com/yas6qyz7
Walnut Springs Playlist: tinyurl.com/ybueuuqj
Running Playlist: tinyurl.com/y375vesw
All links are Amazon Affiliated Link or Insta360 Affiliated. No extra charge for you but by using them you help out the channel. - Jak na to + styl
Great job explaining the entire process, clearly and logically.
Kudos
One thing I would add, Check the crank arm bolt after a ride or two to make sure it's still snug. I have had some square taper bb crank bolts come loose after several rides.
Good clear instructional video.
Very well spoken! Great tutorial 👍🏼
Good job... appreciate the straightforward approach.
That's for showing us how to install the actual bearings.
thsnk you for sharing 💪💪👍👍👋👋🎉🎉
I have a Sun EZ-1 recumbent. Is the tool you pointed to on Amazon the correct too for my bike?
I like his voice and how he speaks. He could've also be a motivational speaker lol just like the other Mike's voice (Mike The Situation).
8mm ty
How to solve the trekking sound problem on the cranck?
That might come down to the style of crank you have. Most of the time it is a torque issue. I would recommend double checking that it is set to the correct torque settings. If that doesn’t fix it you might have to take it apart clean and re-grease it. Also a possible bearing change out.
That was only two pieces. My search continues.
When i try to take it off it just gets tighter and doesnt do anything any tips?
keep going
So the tool literally just tightens on the thread and then pushes the crank off?… clearly a bit essential as i havent been able to get past this point
Yes that is what it does.