Dyson Hair dryer FLASHING LIGHTS fix? | Easy fix!
Vložit
- čas přidán 18. 09. 2023
- In this video I try to fix a Dyson Supersonic HD01 Hair dryer. It was not working and only flashed three white lights when powered on. I followed the troubleshooting guides direct from Dyson's website and was left with it still not working.
Don't forget to like and subscribe!
Link to video from Thrifty Tool Shed with excellent disassembly: • Dyson HD01 Hair Dryer ...
Watermark PNG sourced from: www.freepnglogos.com/pics/sub... - Jak na to + styl
After some thought and looking at other videos showing similar issues, I am fairly certain that the problem was simply that the motor had seized up and simply getting in there and manually moving it freed things up!
Yeah it will probably cut off again. You need to clean the filter. Same issue was happening with me. Soak it 30 mins with soap and water and brush the filter clean
My dayso dray hair don't work it's new but it have worked for just 10 minut and it stopped suddenly and the two red light stat to flashing can you please give me an advice
I believe that the flashing lights usually means that the filter needs to be cleaned. The filter is the part at the base of the handle and should be easy to get to. If that doesn't fix it, I would try to return it and get a different one since it's new and should not be faulty.
Mine only works when the cable
Is at an angle almost like a broken iPhone charger ? Any suggestions?
probably bad cord
No the heating element or head portion rotated too far clockwise, it was past the locking tab
Same problem, same fix. Disassembled everything and the hair dryer worked again magically…
do my x marked clip
Where is you disassembly kit from? That’s what I want
I just bought mine at harbor freight for $7.99.
It’s the pro toolkit from ifixit
We same problem with mine , its not money worth it
and what you do ? I dont understand
My Dyson doesn’t turn on at all. No flashing lights. What could it be
Buy a new one and put the old one back in the box
Thermal fuse
Hi
Mine keeps failing the test when it’s plugged in. It will flash red for the test and click, and then keep doing that over and over. If I try to turn on the dryer the lights will flash on but then turn off. Do you know what could be the problem?
It's hard to say for sure, but the easiest thing to check is the filter at the base of the handle. It's really easy to remove and clean. I know that if that gets clogged it can cause over heating which can cause the issue that you are describing.
This did make me laugh. You literally had no idea what you was doing! All you had to do was clean the bottom filter. that's what the 3 flashing lights mean. it fixes this 99% of the time. its an awful design though having to pop off buttons to get inside. lol
mine was also flashing and all I did was clean the bottom filter and voila, back to life! lol