Triac, tips and Tricks, how to use, clearly explained!
Vložit
- čas přidán 8. 08. 2023
- I don’t know why Triacs are mysterious for many people. But don’t worry, I am here to clear up many ambiguities about this lovely component. I will answer these questions in this video.
What is best method to control triac using microcontroller?
Can I touch TAB of triac?
Are triacs dangerous?
What is precautions about working with triacs?
Do triacs switch DC?
Why triacs can’t switch DC?
Are anode pins of triacs different?
Which part number should I use for a light bulb?
What happen if somebody change phase and neutral places?
Here in this video you will get answer of these questions
Finally, I could understand WHY we must NOT to use a Triac to drive DC current...
Thanks a lot!
Greetings from Argentina!❤
Glad it was helpful, keep watching other videos ❤️😊
@@elewizard Yes, you can bet I will! Thanks a lot for your wonderful videos, and the effort you put in each one! :)
@@elewizardI think a variable resister is far better to turn on the traic then the other little chip you mentioned...
Thanks! I understand triac clearly from your easy style of explaining! I was always confused about why triac can go ON but can't be turned OFF in DC use!
Glad it was helpful!😊
For years I have read about triacs, not really understood, and then forgotten everything I've read. Finally now I understand what they are!
Awesome, glad to hear that
Hello, nice video for beginners but there's a lot more to know when using triacs:
- snubber networks for protection,
- zero crossing switch to reduce electrical noise generation,
- a lot of other things to consider 😁
That is right, I will cover more info about triacs in upcoming videos
Well Im a beginner and for some reason couldn't wrap my head around a triac until this video..lol. now you got me scared lol
You know, I think a 13 minute video is a great length, and this was just enough to whet my appetite. That other stuff sounds interesting, and it's fine to follow-up with additional videos of nice, bite-size lengths.
This is the best explanation on CZcams. You answer all my question.
Glad it was helpful!❤️❤️❤️❤️
Thanks! Finally a triac video that just "clicked" for me. 😊
You’re welcome 😊
I love the bird on a transformer example for danger. It’s hard to not understand that regardless of what language or dialect is used.
😂 right?
That is for fun 😉
Thanks for this presentation and many others like it. Slowly but surely I am piecing together electronic components, their uses, and characteristics and interactions. Self taught, but for presentations such as this. Priceless.👍
You are welcome!
Nice one.... this is the simple reason we can plug the power into the socket either way. I wondered but never really investigated. How awesome!
Cheers 🍻
Thank you for your videos
My pleasure!
Great video. Thank you for the explanation. Currently reading about SSR and this gave me a better understanding.
Glad it was helpful! And thank you for sharing your thoughts 😊
super useful, thanks !
Glad it was helpful!
a good explanation brother...thank you
You are welcome!
To turn on/off an AC appliance (like a light bulb), of course it's much simpler to just use a *relay* which can switch both AC and DC loads.
The only real purpose of introducing a triac to a system is to clip the AC waveform and provide throttling which is a super useful function. That could have been made clear at the beginning of the video.
Thank you for expressing your opinion 👍
Much obliged.
Thank you very much ❤️
That was awesome 👍
Glad you enjoyed it
Very simple explanation and most informative from India
So nice of you my Indian friend ❤️
Thanks!
Thank you so much my friend for your donation ❤️❤️❤️
hope you will upload a video explaining how to check a TRIAC with a multi meter. and how to identify them with other equal items. Thank you very much!!
Great suggestion! I will do
Great video for beginners
Glad you think so!
You will be 500.000 folower soon.
🙏👍
Thanks, I hope so 😃
ممنون مهندس ، عالی بود ❤
Thank you amir, keep watching 👍
Perfect sir
Keep watching!
Damet garm. 3 degeye avvale filmo ke didam fahmidam yeki as behtarin amuzeshas. Karet kheyli aliye. Keep up the good work bro
Thank you so much my friend ❤️
Thank you mr wizard
Your welcome dude
Hi, thats grate. Thank you.
One question, I try to turn on and off a water based cooler motor ( an AC motor that start with 10A and continue with 2A load) with BTA-140 triac and moc3021, I also add a snubber circuit. every thing work fine and I can switch on and off the cooler at first, but when cooler working for about 20min BTA-140 getting hot and it did not disconnect the cooler switch(did not turn off the cooler) any more 😢.
any idea or workaround about this issue ?
1-use a heatsink
2-use original parts
I guess the triac you are using is fake
How did you decide 100 ohm resistor between opto coupler and gate of triac?
You didn't have to electrocute the bird, we believe you 😅💔
🤪
Nice video! How would you quickly test a triac with a multimeter?
It is a good idea for a video 👍
Hook and ohm meter / diode checker between anodes.
With the gate floating, the triac shouldn't fire.
Trigger the triac
It should have about one silicon diode's worth of drop when triggered.
Depending on the triac and the meter, there may not be enough current to keep the triac triggered so connecting and disconnecting the gate may make it conduct and stop conducting.
The main thing you are checking is that the triac isn't shorted and that its gate leg does something.
The most common failure in a triac is they go shorted.
The 2nd most failure is they blow open.
عالی بود .... یکم بیشتر توی جزییات وارد بشین لطفا .
Chashm, mamnoon.
Can multiple be paralleled like MOSFETs for additional current capacity?
Yes, with some considerations, but is is not recommended. It is better to use a single triac with proper power 👍
✔️
im trying to use a triac paired with an arduino to control the direction of an ac motor, how would i go about this?
Consider using a contactor
@@elewizard so i would connect the pins that energize the contactor to the arduino, and wire up live wire to the motor through each side of the contactor, and that will allow me to control the turning on and off of the motor right. Also, how would i use this to change the direction of the motor
Nice also make zero cross detector video 👍
Sure 👍
لهجه قشنگ فارسی میزنه 👏😉
🤪🍻
خیلی عالی بود ممنون
من سعی کردم برای کنترل موتور کولر از ترایاک bt139-600E و moc3021 استفاده کنم اما به دلیل نزدیک بودن پایه های ترایاک هنگام روشن کردن موتور جرقه میزنه و باعث سوختگی در برد میشه. و عملا مدار قابل استفاده نیست.
پیشنهادی برای حل این مشکل دارید ؟
When you dim an halogen 100-watt light bulb with a dimmer, is the power consume always 100 watts?
No, power consumption will be decreased by dimming the bulb.
@@elewizard In the same proportion you reduce the light intensity?
Since you're using optotriac to gate the large triac, does that mean your large triac is turning on and off every time the AC current changes direction? Why not just use an optoisolator?
Yes, that is right, actually the main triac is turning on/off 👍
@@elewizard Is it also true that the large triac would turn itself off every cycle, without any help from the small triac, and therefor the small triac's only job is turning on the large triac every cycle?
Why isnt it working for me😢
How can dimming a incandescent bulb using Potentiometer isolated
In digital dimmers we use opto-couplers
@@elewizard but how is control circuitry for Potentiometer or rotary encoder
@@eboy536 maybe I could make video someday to answer your question
You can likely find a "light dimmer" circuit on line.
The basic idea is to trigger the triac on only after some time has passed since the AC voltage went through zero. The old type of dimmers simply used a resistor and capacitor to make a delayed voltage and a diac to trip the triac when the voltage hits some value.
Do you have another channel
Yes, I have a backup channel. XElectronicx Master Club
Touch the Triac when the circuit is live?
Crazy to touch Mains Voltage?
7:45 OK, you only have 120V AC and 170V peak. In Europe these are 240V AC and 340V peak.
That bites you hard in the fingers!
This can lead to cardiac arrhythmias or death.
If you're lucky and just fall off a chair or ladder and break your bones.
If things go badly, you can no longer pull your hand back and can't cut off the power.
In Europe, the rule is to set it up safely, then take your fingers away and switch it on.
Don't touch it never while it's hot !
Never or you'll regret it or it is to late !
Yeah, that is right 👍
so basically if we try to use the triacs in DC applications, it is literally like using a thyristor and we lose the point of using a triac
Yes, exactly
ایشالا مثل الکتروبوم میترکونی یوتیوبو
Thank you dude. Thanks for your support ❤️❤️❤️❤️
اینستاگرام شمارو دیدم ولی یوتیوب یه چیزی دیگه ست امیدوارم همیشه موفق باشید
@@mohamadmohamade3560 ❤️❤️❤️
Great, let's all put mains AC through a breadboard. No bad things will ever happen.
Seriously, puting 120V AC through a breadboard is a very bad idea.
Stay safe guys.
Yes it is dangerous, actually working with main voltage is dangerous in all cases
That's very sad. This bird is probably death. High current flow thru his brain. Sadly many birds get electrocuted every day.
Yes, also other animals. Like monkeys
Thanks
Welcome 😊
Thanks!
Cheers for the 69THB Super Thanks! 🙏