How to replace spark plug Honda forza 300, como cambiar una bujia en una moto scooter
Vložit
- čas přidán 7. 05. 2016
- How to replace spark plug Honda Forza 300
Se muestra como se realiza el cambio de una bujía en una moto scooter
Spark Plug
31908-KTW-901
LMAR8A-9 (NGK)
Please leave a like if you like the video and make comments, critics to improve the next videos. Thank you - Zábava
Jolly Good 👍
Gracias
Hi i use the one it is in the tool bag of Forza and then the hex.
omg thank you so much !! i forgot i had the tool bad and bought a spark plug removal socket on ebay thanks again
Hi again how tight did you tighten the spark plug from finger tightness did you go around 180 degrees for new spark plug?
@@isaackho7280 Hi i just tight a little. In the manual it say.
12.Tighten the spark plug:
●If the old plug is good:
1/8 turn after it seats
●If installing a new plug, tighten it twice to prevent loosening:
13.Reinstall the spark plug cap. Take care avoid pinching any cables or wires.
14.Install the parts in the reverse order of removal.
a)
First, tighten the plug:
NGK: 1/2 turn after it seats.
b)
Then loosen the plug.
c)
Next, tighten the plug again:
1/8 turn after it seats.
hello did you use bi hex or hex socket 14mm ?
I just did it today using deep 14mm regular socket.