HOW TO REPLACE STEERING PUMP NISSAN MAXIMA | MAXIMA STEERING PUMP REMOVAL
Vložit
- čas přidán 25. 08. 2024
- This video shows how to replace a power steering pump assembly of nissan maxima,Steering pump has an oil leakage.
Tools
Impact wrench
21mm socket
14mm socket
10mm socket
10mm combination wrench
24mm socket
3/8 drive rachet
10mm,12mm,13mm 3/8 drive socket
Parts
Steering pump Assy
cooper washer
steering fluid
Kasagpi recomends being careful to the safety rules when doing any repairs.All do it yourself projects entail to some risk.Creator is not liable to any damaged or injury caused from any information in this video.
#nissanmaxima #steeringpump
My son and I tackled this job on his 09 Maxima. Midas wanted $911 for the parts and labor. I bought the part for $95 on Amazon and it took about 8 hours to do the work. We watched this video well over 25 times. We jacked the front of the car as high as it could go, chocked the wheels, and used jack stands to keep it secure.
One of the hardest parts is getting the bolt in the back of the power steering loose. If you can jack up the whole front of the car it will be easiest. You have to go in from under the passenger wheel well side and slide underneath the middle of the engine. If you look above the exhaust pipe you can see the bolt in the back of the power steering pump. We used about 20 inches in extensions with a 17mm socket to loosen the bolt. Afterward all the bolts were removed, we used a breaker bar to pry the pump off the engine since it's wedged onto the engine.
Getting the new pump on was a pain since the bracket in the back that has to slide between two metal parts on the engine. After many minutes of frustration I grinded the lip on the back of the power steering pump to reduce it and it fit in with no problem. Without this video it would have been impossible. I hope this comment helps someone.
Thanks...
Thank u
Helped me decide the Mechanic's quote wasn't as ridiculous as I thought initially
Which Amazon part did you choose?
Thanks. Search for A premium online. It's $87
You deserve an award for your video compared to the others on CZcams. You actually taught without speaking. Thanks
Best video of these repair by far. Thank you.
OMFG!! I did this job two days ago, with no lift.. took me forever and it was a complete nightmare, especially since i don't have small hands to fit in those tiny spaces.. busted my knuckles on this one. Never touching this repair again in my life!
Yes its too difficult to replace because of the space,thanks..
😂
Maganda ang content m boss tuloy tuloy lng marami makakapansin nito. Lalong Lalo sa may mga sasakyan.
Salamat po
And alldata has this as a 1.1 hour job. My ass. Thanks for the video dude
well, with the power of video editing you might get it done in 11 minutes too
to remove and replace and get good fluid back in the system more like 4-5 hours
Alldata can do the job for that amount of labor. Not me.
So informative at ma tuto ka talagang mag fix ng car dahil. Pinapakita mo paano. Thanks for sharing
Patambling lodi😊
Nood po muna bago kulayan pra d masayang
iwan lang ng bakas sa aking kubo,
Mamatzpo💛
@@dayangangeladventures6787 mauna ka lods.. Sunod ako tabling. Thanks
@@prideh.easttown3730 otw na po salamat iwan nlng aq bakas sa kubz u po😊
Keep safe always boss and God bless new friend here sending to my support
Very impressive you've either got tiny hands or long fingers I had to take the side engine mount off an drop the cradle to get my hands enough room to get the top 2 bolts
Nandito na ko master prehas pala kyo nagtrabaho ng kuya ko automotive galing 👏👏👏👏
Ah ganu po ba master..more adventures po..
This awesome and informative.. Keep it up sir, stay safe
ayos tong content mo boss very informative para sa may mga sasakyan. keep on vlogging lang boss new supporter here.
I had to look at your video since the service manual doesnt show like a precise way to do it and alldata is pretty much the same... this thing kicked my ass man...
thanks for the info
Thanks....
About to do mine now 😅 wish me luck
Very detailed. Great job 👏
ayos master ganda po ng bahay nyo
Great job and video! Thanks 🙏
Thanks helpful video!!!
Ayos master mecaniko ka pala hehe. Btw master andito na po ako😁
Salamat po master...
Tamsak kapatid from GLEENCARLO VLOG
Ok yan master,.well maintenance pra s good running condition..
Patambling lodi😊
Nood po muna bago kulayan pra d masayang
iwan lang ng bakas sa aking kubo,
Mamatzpo💛
ang galing mo pala dyan master. full packaged done master.
Salamat po master..
Tamsak na ma'am
Wondering if you can remove motor mounts and lower the motor enough to make it easier
Thank you for sharing idol
Ang galing mo boss..
I appreciate this video
Thank you very much...
Thank you for sharing master
great job idol shout out.
Super sipag mo boss
i just replaced the tensioner 😭 gotta remove it again i guess
There was starting a small leak but you turn video off.
support lng boss
Good job 👍
Tamsak done
Keef safe always boss godbless you
Salamat po master
Awesome video I have to do this to my maxima but was intimidated by the space thanks to your step by step I’m definitely gonna do it thank you 10000000 % ❤️❤️❤️❤️❤️❤️❤️❤️❤️👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽
Thanks....you can do it sir...
Ayus master
I have a Nissan maxima it's not a sv but do I need the pump with the reservoir or without it and what's the reservoir for
How long did it take to torque the bolts to specification?
Tamsak po
What size is the bolt from the front of the bracket ?
12mm
Tamsak done/ love sarang
Done tamsak
Patambling lodi😊
Nood po muna bago kulayan pra d masayang
iwan lang ng bakas sa aking kubo,
Mamatzpo💛
Nice video! I need to do this on my 08 V6 Altima. It appears that the pump is mounted with 4 bolts.... 1 on the rear and 3 on the front. Please confirm. Thanks!
Yes...
Pays 1.5 on Mitchell... not a money maker, thanks for the video tho. Hated this job.
Thank you sir for watching...
That’s why I say let Mitchell be the one to do it for that price. Not me.
Taga saan kayo?
What size is the bolt for the high line? 24mm or 22mm?
22mm
tamsak raid team saranghamida
At 2:55 I have no clue how you were able to fit a wrench in there, unless you grinded/ made a special wrench
Its only a combination wrench...
I ended up getting the pump off first, then got that upper bolt for the tensioner. Thanks though 👍
A 13mm stubby or offset combo wrench will save lots of time when removing the front bolts.
hello at 4:21 which special tools did you use to unbolt the power steer pump from the back?
I used 17 mm 1/2 drive socket with universal joint and a long 1/2 drive extension....thanks for watching...
I recommend you jack the front of the car as high as you can on both sides because you have to go in from under the passenger wheel well side and slide underneath the middle of the engine. If you look above the exhaust pipe you can see the bolt in the back of the power steering pump. Very awkward angles and tight spaces. We used about 20 inches in extensions with a 17mm socket to loosen the bolt. Impact tools kept falling off the bolt which made it impossible to loosen so we used a regular 1/2 ratchet like Kasagpi did in the video.
Done tamsak # sarang hamida
Shot out idol😊
Boss meron ako ginagawa dito na Nissan teana pareho Sila Ng steering pump Ng maxima pinalitan ko lng po Ng steering host tumigas na Yung steering wheel ano po Kaya possible Na problema? sana po masagot salamat boss
Original po ba na host ang kinabit,o pina repair lang o pina crimping lng,kung orig sir air bleeding mo lang yan,kung repair lang sir ang hose baka di maganda aang pagkagawa,pwede kasi minsan na lumiliit ang butas ng fittings kapag crimping ang hose...
What year models does this job pertain to?
2010 to 2014 model,thanks for watching...
Also 09. Mine is an 09 and it's the exactly the same.
Too much skipping and editing didn't really help me.
The bolt in the back is where i am stuck, how am i supposed to get a socket on that?
Use universal joint extension to acces that bolt...
I know this comment is late but hopefully it helps someone. I recommend you jack the front of the car as high as you can on both sides because you have to go in from under the passenger wheel well side and slide underneath the middle of the engine. If you look above the exhaust pipe you can see the bolt in the back of the power steering pump. Very awkward angles and tight spaces. We used about 20 inches in extensions with a 17mm socket to loosen the bolt. Impact tools kept falling off the bolt which made it impossible to loosen so we used a regular 1/2 ratchet like Kasagpi did in the video.
Thank you this tip helped me out!!
#dj blue
Hello lodi new friend here sending back your kindness🤍interesting video
I impressed with your knowledge & hard work lodz galing galing 👏🏻,,keep growing yourYTC💪🏻
Fullpak lodi,,God bless..staySafe🙏🏻
StayConn🤜🏼🤛🏻Solid Kasagpi here💪🏻
Salamat po
#djblue
Ammm ammm what year is that car irrrr ammmm
Thanks nabalikan na kita bro hug done
اسوء سيارت هي سيارات النيسان بشكل عام
bro may mairecommend ka bang murang car 2ndhand pero considered walang aberya na swak sa budget? 🤔 pm me messenger lods... fb KEN ISAIAH PROCIANOS 🤫
Marami naman pong budgetcar na second hand,basta bago lang po bumili mas maganda kung ma test at check up,kung mat kakilala po kayo mchanicsa lugar nyo pasama na lng po kayo..
I replaced p/s pump on my 2014 Maxima in March which failed again this week. Is there something else that can cause the pump to fail after replacement?