How to Install a K&N Cold Air Intake | BMW e46 330Ci

Sdílet
Vložit
  • čas přidán 7. 01. 2022
  • How to Install a K&N Cold Air Intake on a 1999, 2000, 2001, 2002, 2003, 2004, 2005 BMW e46 330Ci.
    This installation tutorial will work for all BMW e46s and should be pretty similar to most cars.
    Buy your own K&N Cold Air Intake here!:
    www.amazon.com/dp/B000NK9FHG/...
    Music: bensound.com
  • Auta a dopravní prostředky

Komentáře • 80

  • @bazzyg
    @bazzyg Před 5 měsíci +5

    For those of you who have a check engine light EML after installing i suggest cleaning the MAF with electrical contact cleaner and while you're there, remove the DISA valve and ICV and clean them too with carb cleaner. Then, reset the car by removing the negative battery terminal for over 1 hour and touch it against the battery frame and turn on the lights and depress the brake pedal to release any charge in the system.
    This should reset all throttle adaptions and sensors for the new flilter.

    • @giolascala7
      @giolascala7  Před 5 měsíci +1

      Correct. Also sometimes oil from the filter gets onto the MAF sensor and will cause it to read incorrectly. MAF cleaner will solve this quickly!

  • @JaayMagnum
    @JaayMagnum Před 2 lety +1

    Thank you man! Great video

  • @isrealperez9069
    @isrealperez9069 Před 2 lety

    Do you have to tune youre vehicle when installing that unit or else you're fuel ltft will increase

    • @giolascala7
      @giolascala7  Před 2 lety

      I don’t have a tune on my car but one day I plan on getting it tuned!

    • @JZPGod
      @JZPGod Před 2 lety +2

      @@giolascala7 you didn’t understand him too well. He is asking if we must change anything in the car after installing this air intake for example like Amount of fuel that is delivered to the combustion chamber by the ECU. And the answer is no, your engine will do it by itself. Because of all these sensors etc

    • @giolascala7
      @giolascala7  Před 2 lety +1

      @@JZPGod Ohh my bad! I must have confused him haha. You are correct, your ECU will program itself after a little in order to make the car run as well as it should and not throw codes. If you do tune it however, you can really take advantage of the new intake and allow for some more power!

  • @user-iz6jo8rv9r
    @user-iz6jo8rv9r Před rokem

    Can u feel any changes on ur power,acceleration ,or anything? In my country to buy this on EBay I must work one month,I’m asking u if u can tell me is it worth ?

    • @giolascala7
      @giolascala7  Před rokem +1

      The power is not very noticeable but it makes the car sound very nice when you slam the gas. The induction noises are great.

  • @CohnWolfeFitness
    @CohnWolfeFitness Před rokem +5

    Where did you get your gloss black kidney grills?

    • @giolascala7
      @giolascala7  Před rokem +5

      Hahah bro I just spray painted my OEM grills😂

    • @CohnWolfeFitness
      @CohnWolfeFitness Před rokem

      @@giolascala7 lmao 😂 I thought about that. I have the same color car e46 but the ZHP version.

    • @giolascala7
      @giolascala7  Před rokem

      @Cohn Wolfe That’s beautiful! I just got the ZHP front bumper!! Anyway, this is your sign to remove your grills, sand them, and paint them!😂

  • @ivanmartinez9074
    @ivanmartinez9074 Před 6 měsíci

    I got code P0101 after a week of running it. Did you ever experience MAF issues?

    • @giolascala7
      @giolascala7  Před 4 měsíci

      I once had my MAF sensor reading incorrectly since some oil from the filter got onto the sensor. Some MAF cleaner fixed this easily!

  • @Tufflove4478
    @Tufflove4478 Před 4 měsíci +1

    Would this work with a 325 ci

    • @giolascala7
      @giolascala7  Před 4 měsíci +1

      Yes! But make sure to buy the k&n intake for the m54b25 engine that’s in the 325Ci

  • @Furkankeskinnn
    @Furkankeskinnn Před 6 měsíci

    There is another connector at 0:42 what is it? You didn't connect it anywhere after install new filter

    • @giolascala7
      @giolascala7  Před 4 měsíci

      Yeah it does not attach to the new filter. The harness just hangs loose without connecting back onto anything

    • @Furkankeskinnn
      @Furkankeskinnn Před 4 měsíci

      @@giolascala7 so do you know what is it for? What is the purpose of hanging harness? Does it cause any engine light?

    • @giolascala7
      @giolascala7  Před 4 měsíci

      @@Furkankeskinnn not sure. It won’t cause an engine light

  • @gevinduxrs2
    @gevinduxrs2 Před 6 měsíci

    Can you explain what does this do? Only the sounds

    • @bazzyg
      @bazzyg Před 5 měsíci

      It increases cold air flow into the engine, thereby increasing BHP and torque. The claimed figures are +11 bhp and + 20lbs foot torque but in real world it would probably be +5bhp. The original air box and filter are somewhat restrictive.

    • @giolascala7
      @giolascala7  Před 5 měsíci +1

      Yes, sounds and some added horsepower

  • @WRLDZ46
    @WRLDZ46 Před rokem

    my charge pipe doesn’t fit the thing connected to the og intake tube . what do i do ?

    • @giolascala7
      @giolascala7  Před rokem +1

      Do you mean the charge pipe doesn’t fit onto the MAF sensor? Did you use the rubber coupler the kit came with?

    • @WRLDZ46
      @WRLDZ46 Před rokem

      @@giolascala7 i mean like the tube that says k&n doesn’t fit onto the tube that’s connected to the engine . like where u said 2:34

    • @WRLDZ46
      @WRLDZ46 Před rokem

      the upper boot doesn’t fit the lower boot

    • @giolascala7
      @giolascala7  Před rokem

      @@WRLDZ46 Thats weird! How big is the difference in size?

    • @WRLDZ46
      @WRLDZ46 Před rokem

      @@giolascala7 it’s literally the same size 😭 so neither goes into each other

  • @ozzyj4936
    @ozzyj4936 Před 2 lety +2

    Is your engine an m54 or m56?

    • @giolascala7
      @giolascala7  Před 2 lety

      It’s the M54.

    • @ozzyj4936
      @ozzyj4936 Před 2 lety

      Is there an intake out there for an m56?

    • @giolascala7
      @giolascala7  Před 2 lety

      @@ozzyj4936 There might be. I treid looking for one but no luck. Worst comes to worst you could always try building your own with some metal pipe, elbows, and a k&n filter!

    • @youngboyrapgod360
      @youngboyrapgod360 Před 9 měsíci

      How do you check that?

  • @youonlyliveonce2556
    @youonlyliveonce2556 Před 2 lety

    will a cold air intake make my engine light came on?

    • @giolascala7
      @giolascala7  Před 2 lety

      Some people have the check engine light come on and some don’t. After running this setup for a couple of months I haven’t gotten a check engine light, so that’s my experience.

    • @EdenYisrael
      @EdenYisrael Před 2 lety

      yes, and the engine will act weird until it adapts to the new intake

    • @JZPGod
      @JZPGod Před 2 lety

      Because it’s trying to figure it out how much more fuel it has to inject because there is more air delivered to the engine

  • @isrealperez9069
    @isrealperez9069 Před 2 lety +2

    Does it cause a fuel trim issue for Bank 1 and bank 2

    • @danielzychniewicz2633
      @danielzychniewicz2633 Před 2 lety +1

      Yeah If you’re car is stock it’ll have a running rich I believe.

    • @isrealperez9069
      @isrealperez9069 Před 2 lety +2

      @@danielzychniewicz2633 thanks I wish I knew that before I end up buying one end up purchase a K&N model instead of an aftermarket cuz cuz the aftermarket was showing a e3 and e4 code for my 04 xi

    • @danielzychniewicz2633
      @danielzychniewicz2633 Před 2 lety +1

      @@isrealperez9069 you can use that aftermarket intake you would just need to get a ecu tune.

    • @PigToots
      @PigToots Před 2 lety

      @@isrealperez9069 I have an 04 XI aswell, how's the fit? any issues etc? Thinking of buying this one in the video

    • @giolascala7
      @giolascala7  Před 2 lety +2

      yeah i now get a check engine light ever couple of weeks from this but there isn’t any decreases in power or anything

  • @victorluarte1390
    @victorluarte1390 Před 2 lety

    Nice video,can you post the link to buy it?thanks

    • @giolascala7
      @giolascala7  Před 2 lety

      Yeah, just put it in the description but here you go

    • @giolascala7
      @giolascala7  Před 2 lety

      www.amazon.com/dp/B000NK9FHG/ref=cm_sw_r_cp_api_glt_i_W4P711BKY42F1QJKDA5C

  • @lanehart3486
    @lanehart3486 Před rokem

    So it’s bad if I get a cold air intake ? As far as I saw this comment it look like it’s bad

    • @giolascala7
      @giolascala7  Před rokem

      It is not a bad thing! Some people argue that it is pretty much useless until you get a tune to fully maximize the power return, but until then it makes your car sound cooler!😂

  • @aiko1739
    @aiko1739 Před 2 lety +2

    Sucks I have a 2006 :/ nice vid tho

    • @Viidarr13
      @Viidarr13 Před 2 lety +2

      join us! come to the dark side, we have timeless e46´s! (hides all the oil and coolant leak lemon squweze wallet issues)

  • @xankpc
    @xankpc Před 2 lety +3

    Please just don’t do this the stock airbox is amazing and doing this without a tune and with nothing to back up the ‘increased’ air flow means you’re doing nothing but making your car worse. If you like how it looks and do it purely for that you should also understand you’re a clown. No hate to the guy who made this video but please just don’t

    • @alexeismalley1620
      @alexeismalley1620 Před 2 lety +19

      Buddy watched a little too much Scottie Kilmer

    • @larryjohnson8168
      @larryjohnson8168 Před 2 lety

      True it does need a remap for these filters

    • @backblockdetails
      @backblockdetails Před 2 lety

      No it doesnt. The airflow between this intake and the stock Airbox is so comparable it rarely trips the check engine light. The only real difference between this and stock is the sound

    • @xankpc
      @xankpc Před 2 lety

      @@backblockdetails mmm depending on how good the engine is running the airflow and pressure to the fuel regulator return line and other line I can remeber the name can be less. Not bad but you’ll run lean

    • @giolascala7
      @giolascala7  Před 2 lety

      eventually I plan on remapping and gaining the extra power