How to Install a Soundstream V2 in a 2014-2023 Harley Davidson® Street Glide, Electra Glide, & Ultra
Vložit
- čas přidán 25. 08. 2024
- In today's video, we walk you through the step by step process of how to install a Soundstream V2 radio in your 2014-2023 Harley Davidson® Street Glide, Electra Glide, or Ultra.
Order Your Soundstream V2 Radio here:
volunteeraudio...
🔥8.3″ Screen - First in the industry made for Harley Davidson®
🔥1000 NIT Screen - Brighter & more vibrant screen in direct sunlight
🔥QLCD (with Quantum Film) - Very Colorful Display
🔥Certified Wireless Apple CarPlay & Android Auto
🔥On Board iGo Primo GPS Navigation with use of factory GPS antenna or the one included
🔥Built-In Wireless Headset Interface - No Factory WHIM Required (Any OEM or Aftermarket Bluetooth Headset can Connect)
🔥Headset experience for both the Rider and Passenger - Rider can have Nav, Music, Phone calls, or all three. Passenger can be Nav, Music, or both. (No Phone call for Passenger)
🔥Factory Cursor! Navigate all the menus just like the factory radio through the thumb control
🔥Rally Mode™ - Stream Music with 300 of your best friends up to 330 feet away! You read that right…. 300 at 330 feet! (capability of naming your bike for this service)
🔥15 band EQ with 3D Sound Mode
🔥8 layer PCB - Cleaner sound and more room for other electronics
🔥Compatible w/ iDataLink® Maestro® RR CANBUS Integration Module, Displays Up To 10 Digital Gauges, Choose From 50+ Available, Pop-Up Warnings For Oil Pressure, Fuel Level, Engine Temp, & More
🔥Customizable Programming Of Handlebar Thumb Controls, Activates Boom 1, Boom 2, & HD Audio OEM Amplifiers, Wire Harness Ready For iDataLink® Maestro® RR® & RR2®
🔥 Upgrade Head Unit For Touring Motorcycles, Exact Fit In OEM Location Uses OEM Mounting Hardware, No Brackets Or Trim Rings Required
🔥Uses OEM USB® & Integrated Radio Antenna, No Adapters Required, IPx5 Water-Resistant Faceplate, Safe for All Weather & Washing
🔥SiriusXM Ready® (SXV300 vehicle connect tuner required)
🔥Handlebar Cursor To Scroll & Select Playback Controls, Settings, etc.
🔥Bluetooth® Wireless Connectivity for Audio Playback & Control
Video Camera RCA Input w/ 12v Trigger & On-Screen Shortcut
🔥15-band Digital Equalizer w/ Preset & Custom Settings Built-in
🔥400 watt peak 4-Channel Amplifier Built-in, Class D & 2-Ohm Stable
🔥5-Volt RCA Audio Outputs for Front, Rear, & Subwoofer Amplifiers
🔥High Pass Crossover Separate for Front & Rear Speaker/RCA Outputs
🔥Low Pass & Subsonic Crossover for Subwoofer RCA Output
🔥2 USB inputs, 1 USB C and 1 USB A
If you're wanting a larger upgrade, we build the best fully plug n play Amp / Speaker Upgrade packages using the best brands for your Harley Davidson! You may be surprised how affordable it is to get Volunteer Audio to do an amazing Speaker / Amp upgrade to your Harley Davidson. All plug n play so no wiring is cut and all factory warranties are maintained! Give our sales team a call at 1-844-30AUDIO to go over pricing, options, and to book your installation appointment! Want to save money and install yourself? Call us to get a diy plug n play package, then watch our simple step by step install videos at www.VolunteerAudio.com! We offer no interest financing for up to 24 months through affirm or PayPal credit! Get your system now and pay later!
More on Affirm here:
www.affirm.com...
#VolunteerAudio #HarleyDavidson #roadglide #streetglide #soundstream #motorcycleaudio #cvoroadglide #cvostreetglide #soundstreamreserve
I just installed my V2 with Hertz speakers and I am impressed. Just need patience working with the speaker pods. The clarity is amazing! No amp required, loud enough for me.
So glad you like it!
Got mine installed last night, awesome sound, thanks for the CZcams instructions. What a difference from the HD system, best purchase I’ve made.
Thank you!
Just installed mine today Jay. Your video was spot on (of course), easy peazy. Can't wait to go out on the road to really try it out and configure it. Btw, 30 minutes, and done!!
Thank you!
I had the Sony XAV-AX7000 with no amp. I just replaced it with the V2 and the Hertz amp and I cannot believe how loud this thing is compared to when it didn't have an amp. The AX7000 was already known as being a powerful unit, but it just doesn't compare to the sound quality and the fullness of having an amp. Another positive is that the V2 is much faster and much more reactive than the Sony. Only time will tell how good the unit is. I live in west Texas so it is going to see some very hot and dry weather as well as cold wet climates. My hope is that it doesn't shut off randomly like my Sony did if it was super damp or I had been in rain for a while.
Thank you!
Just installed mine yesterday! It’s been a long 4 month wait, but it was sooo worth it! Thanks Volunteer Audio, it sounds great!
I'm still waiting on mine. When did you order?
@@jam471975 the morning after they went on pre-order I didn’t know how many or how quickly they were going to be allocated. I was ready to pull the trigger on an Si, im so happy I waited for the announcement. It was a hell of a wait, but definitely worth it!
@@SharpShooter9867that makes sense, I didn't order mine until March 19th. It's coming soon though, can't wait to get it installed and along with the the stage 4 Hertz!
@@jam471975 I did stage 4 with the big amp as well, you’ll definitely be impressed!
Cannot wait to get my head unit. Got the Hertz 6x9 installed in my bag last night.
I have the big amp, 6x9s, and the 6.5s and it sound great! It was a smidge bright, so I turned some trebble down a tick but what a difference. These things rock when you turn them up, and I’ve only taken it to 18 volume in the driveway when I tested it!
I did the same thing, got my Hertz 6x9s installed last week. Waiting on the V2 to do the rest!
@@SharpShooter9867 I have the same just waiting for the head unit to pull apart the fairing and hook everything up.
@@jam471975 yea same I cannot wait. I was nervous about cutting the lids but it was actually really easy. Just a little messy but easy to clean up also.
I can't wait to get one!
I ordered the V2 from you. Can’t wait to get it. Looking forward to seeing how it sounds with the Rockford Fosgate Amp and Speakers. I might being ordering an amp and speaker kit from you if i don’t like how it sounds with the Rockford Fosgate Amp and tour pack speakers. I like the way the bikes sound that you have done videos on.
My goal is to begin installing amps and speakers to have a side hobby.
Thank you
I received the radio and was quite surprised with the key lanyard and the Patriot Bible. That is awesome!!!!! Thank you very much. The radio was straightforward to install, I did connect a cam on the rear but the radio, it's not being recognized it, says " no camera detected". ???
@@MervMedina the camera must be powered, the pink wire must be connected to the camera power wire and the camera must be grounded also, thank you, we can help get your camera working. Give our tech support a call on Friday at 1-844-30AUDIO
@@volunteeraudio I'll recheck my connections. Perhaps there's no power, I did give power to the so-called reverse cam activation wire, the ir lights (in the cameras case are white) but nothing on screen. Will keep you informed,....God Bless .
OK, my connection was wrong, cam is now working. thanks
Great video, like it.
Thank you
Awaiting the Road Glide Limited install…
At 14:45 in the video, there is a reference to plugging in an amp turn on wire to the MRR2. I have a 2020 Road Glide And the radio install video for road glides does not mention installing with an amp. Is it better to plug-in the amplifier turn on wire to the MRR2 or should I use the factory connection in the upper right side of my faring? Thanks for all you do!
@@daleabcdefg12345 when using the Soundstream radio you plug it into the radio/maestro harness
So when I choose headset list, the screen goes black and it restarts. Firmware update or something I should know about? I’d like to be able to use my headset while riding, kind of why I bought it, lol.
Also, my back toggle on the right side hand switches, won’t work at all.
If you bought from volunteer audio give our tech line a call at 1-844-30AUDIO
What brand Torx drivers are you using....can't seem to find anything in that length...all too long or too short....those look perfect.
Gearwrench brand
@@volunteeraudio Thanks....they are on the way. Next step: Order my V2. Great video and much appreciated.
I'm looking for a video that shows me how to connect the V2 with my Stage III Rockford Fosgate Amp. Please Help!
Plug it in, there is not special setup. If the Rockford worked before it will continue with the v2 radio installed
Can you please show the install with the amp.
Check out our step by step install videos at www.volunteeraudio.com
Hey Jay. What pry tool/ panel removal tool do you use? Amazon options appear really flimsy compared to what you use.
Check out the “ultimate prytool”
12vtools.com/product/ultimate-pry-tool/
I have a question I don’t believe you have addressed before. Today I checked my bike for diagnostic codes using the trip meter button. No codes, but one of the components it checks is the Radio. So my question is Will the V2 cause a code to appear for the radio?
No, it will no longer check the radio
Are you still pushing out 20-30 units a day?
All 500 preorders will be shipped by end of next week, we have shipped over 200 at the point and still going
how does it work with the dakota digital gauges
No problem
@@volunteeraudio are they in stock yet? i have a 2014 street glide
My speedometer on the sound stream page reads zero all of the time. Is there something in the settings to make it active? It works fine in gauge mode.
I have the same issue. Everything seems to work fine except speed on the home page stays at 0mph.
Update from idatalink is out to fix this issue
Update from idatalink is out to fix this issue
Can confirm the maestro update does fix this.
After installing radio and amp the bike will not start. Have fault code U0198c
@@OMG_Clowns you have left a factory connector unplugged, or left a needed module out, on 2020 models there is a telematics module that must remain plugged in
@@volunteeraudio I am looking for it currently. Not sure where it is located. Thank you for the response.
I found it. Now I gotta find a place to mount it since it’s in the location of where the amp used to go.
Thank you guys for the fast response. I didn’t expect a response being Sunday. You guys have the best customer service ever.
@@OMG_Clowns remove the bracket from it and it will fit in the cavity to the right of the radio
Got mine installed yesterday. Trying to figure out why mine will work fine sometimes, and get no connectivity others. By no connectivity, I mean gauges don't work, nor do any hand controls. It almost seems random, but it's like the Maestro goes into deep sleep, and requires waking up with a cycling of the ignition, then it works the second time.
That being said, I forgot how many things annoyed me about my 14Si unit i previously owned. I really hoped this unit would be the magic bullet, cure all, and for almost $1,900, it should have been. It's not.
The Maestro unit need more flexibility. The fact that i can't program a home button or a track forward or back button is ridiculous. The fact that scrolling through sources includes stuff like connected device list, headset selection, settings, camera, rally mode, etc is also stupid.
While this radio has it's upsides, I'm having major buyers remorse one day into owning it, after having waited 5 months.
I sincerely hope these kinks get worked out, but if the 14Si is any indication, I'm not exactly holding my breath. It really is a shame to see so much potential wasted on poor software design.
Well for one, you can program it…if your have the MRR2 its via Bluetooth and the MRR is via a usb and computer. Did you plug your Meastro harness directly into the radio and then add any addition amp harnessing or the factory harness after it? I did and have no issues with mine, but I did have to go back and watch the original install video for the V2 to figure out in what order Jay plugged them in because I also had an amp harness. I would check both of those!
@@SharpShooter9867 yes, I flashed my MRR2 via Bluetooth. I'm quite familiar with the process. I pulled my main fuse when installing the radio, as I do when dealing with anything electrical, so there shouldn't have any issue there. I programmed the buttons to do what I prefer, and that programming has held just fine. But there are definitely limitations to what you can assign. For some reason, seek now works for skipping tracks in Android Auto, but it didn't yesterday. Can't figure that one out.
The limitations are more of an annoyance on an expensive radio, but I can deal with it for the most part. The Maestro randomly deciding if it wants to work is infuriating though, and absolutely should not be happening. This kind of stuff is the reason that a lot of people use Apple products. They just work together. No screwing around, troubleshooting stuff on stupid expensive equipment.
@@live2ride9696 Ah, I gotcha man. Good luck!
@@SharpShooter9867 thank you brother. I just re-read my response, and I didn't mean to come off as snarky. Sorry. I'm just a little frustrated with the troubleshooting process on this radio.
There are new updates already released that fix the issue you reported, both radio and maestro have new updates