Laotie ES18p & Xtron X30 + Vesc 75100 🛴 Escoot Offroad Adventure in Poland 🌄 Escoots still Rocks 🚀
Vložit
- čas přidán 26. 05. 2022
- ThrotX in my Eshop pirate.ac/shop/product/throtx
Genuine FSESC vesc-project.com/Hardware
Flipsky 75100 Cheapest on BG: bit.ly/75100BG / Ali: s.click.aliexpress.com/e/_9vWfC9
😍 My most FAV scoot of all time Laotie Ti30 bit.ly/Landbreaker 😍
🍻🍕 Pirate Eshop pirate.ac/shop Prints and Projects 🍻🍕🍻🍕
🍻🍕 Do you 💘 Pirate ⁉ and want to Support buy what U like from links‼: Banggood bit.ly/PirateBG Ali s.click.aliexpress.com/e/_dTN...
Or just leave some positive comment and make my Day 🍕🍻
🐱🏍🚀 Patreon / pirateonpatreon 🚀🐱🏍
🔨🔨 Free 3DProjects www.thingiverse.com/PirateIn3D 🔨🔨
👨🏾🤝👨🏼👨🏾🤝👨🏾🤝👨🏽 FB Group / epowergroup 👨🏾🤝👨🏾🤝👨🏽👨🏾🤝👨🏼
😍 My most FAV scoot of all time Laotie Ti30 bit.ly/Landbreaker 😍
⚡Most poweful scoot for $ Boyueda bit.ly/BOYUEDA ⚡ - Zábava
Hey! I love your channel! I just put a vesc in my Yume y10, loving the system so far!
What plans do you have next? Have you considered liquid cooling or air intakes? I am mostly worried about overheating still. I was only able to find 32v 50a fuses, do you happen to know of any higher voltage fuses that won't melt? Thank you
My 75100 overheats very rarerly , I just learned how to use it I guess. Mostly temps are under 65C when i smashing full throttle aaaand I trying to avoid deep sand and sloppy hills :o)
Siemka Man mam t30 i kupilem ten alarm za 12 baksow i hefyna opcja to podlaczyc tak jsk u Ciebie na filmiku? Czyli mniewam ze tymi koncowkami orginalnymi przy alarmie bialymi nie podlacze bez odcinania niczego?
Did u improve the cooling ?
Love this channel!!! What's the best scooter at the moment for €1,500?
Ti30 Laotie, check my videos
i have just bought my second scooter the solar p1 pro its does 50 mph and it does 50 aswell but that scooter your on its no xioami lol
Honest answer, ES18p or SR10? Laotie warns about overheating/scoot turns off and works after a charge.. Is this only for SR10 and not ES18P? Have you noticed any difference between the two?
Waiting to place an order, just don't know which one to pick.. SR10 doesnt have offroad wheels available right now either, but ES18P does.
I'm around 183cm 90kg, how's the height of the SR10 stem?
Widzę, że temp. na sterowniku dochodzi do 80 stopni. W joyor y6s podłączyłem czujnik temp. i osiągam podobne wartości. Problem w tym, że jest tam bardzo malo miejsca i przewody, które leżą na sterowniku mają podtopione izolacje co grozi zwarciem. Reasumując dzięki Twoim danym wiem, ze taka temp sterownika jest niestety normalna.
I'm tempted to put it on my SR10 but i'm afraid of overheat it in summer
then wait 5sec until it cools down and smash it again :)
Hello friend I have a scotter with two 1600w motor that works with 60v battery, I bought two flipsky 75100 controllers and I made the automatic setup but I felt that the scooter doesn't work fine, when I push 100% throtle the motor make a different noise sound. I talked with some friends that have a good knowledge in this issue, they said to change "KI and KP" current parameters and I felt a good improviment, but still not good, could you give me the Ki and Kp and others parameters to find the best setup because your scooters is very simar with mine. Thanks for your time bro...see you
I have no idea what is KI KP
@@PirateOnCZcams thanks for your answer, foc parameters, right after the limits, there are 8 parameters, could please say for me what appears on your setup? My scooter is almost the sabe of yours, but the automatic setup doesn't work properly here, I need to put it manually
Foc parameters:
1:Motor induntance (52.10)
2:motor flux linkage, here (10.680)
3: current kp (0.2000)
4: current ki (4.00)
5: zero Vector frequency (30.0)
6: openloop erpm (700.00)
7:motor resistence (4.2)
8:motor inductance (52.10)
The others about limit I have already made, thanks for your time and attention, see you friend
Only use auto tune
@@PirateOnCZcams I know, I saw all your videos, could please only say for me the number that appears about foc parameters, it will help me a lot. I use the auto mode to but the parameters does not work properly, I will use same that appears on your esc Foc setup
@@deneta0509 look for it in vesc or esk8 forums
75100 good for 3kw ebike hub motor?
Nah, for 3kw hub u need 6kw controller
@@PirateOnCZcams Thanks a lot for the reply. It is actually 1-2kw driving at 3kw. I wonder if this little controller is okay.
@@1123pawel yes , it could just overheat , then u have to wait like 3sec and smash it again ;)
@@PirateOnCZcams Thank you. I will have to try it out!
@@PirateOnCZcams isnt this rated for 20s? :) and 100a? thats means 84v and 100 = 8000kw. Did you try 20s?