Video

My brake disc is bent and I want to replace it, but my disassembly revealed no way to disconnect the power cable... It's all shrink wrapped! There HAS to be an easier way to replace this small part!

hola

Where do I connect a 3-wire kickstand switch sensor to the controller? I don’t see a connector for it.

People who buy new Ebikes don't realize that they will need to do this in the future. Unless they have the money to pay a bike shop and a lot of people don't. Thank God for CZcams and how to posters like this. Thank you for the maintenance video. 👍

My front hub wheel makes to much power compared to the rear which makes it spin all the time when accelerating, any idea how can i adjust this? super annoying...Thanks

Got mine working by using St link flashing the BLE. my only issue is when I turn on the front headlight the scooter goes nuts screen flickering and motor start engaging by itself 🤔 I've tried 2 different displays off amazon now both are doing this. If I unplug the front light the scooter works perfectly fine so strange

I want to replace the black rubber shock covers with red ones. Especially with that brake bracket it doesn't seem possible. The red covers are only $9 might take a gamble and try anyway when I change the tires next month

45-50kg of you?? just ride regular place as my city with 100kg.. 9-10km with 7500batery.. btw see no 50+km rande about 13-14km with 50%batery.. yo..

I have a 48v to 24v/10a to power my 200w audio amp!

have you got part 2

hey man what u think of Makerbase VESCs? they have pretty much the same ones as Flipsky but super super cheap like €125 for 84200HP which has real phase sensors and phase filters, it's like the better version of 75200 which they also have for such a price, absolute madness

Thanks man

Not more available 😞 last price 799.- 🫣

Getting E10 error with the new display says is compatible for MI 365 pro. I can't update the firmware because it's E10 error

Tried this but I'm getting E10 error even after trying to update in the app and also with custom firmware

I don’t have an eco button on my e scooter. I have pluss, minus, (change modes) and power on/power off. How do i do it?

Can i change the all front to the kaabo wolf front?

test a pair of MKSESC75200 Alu PCB V2's (with the remote turnon feature) in a Ti30 or similar, best controllers on Ali for €100 (they're the same as single motor 75200 alu pcb from flipsky), have double the fets from the 75100 alu pcb and can take up 250 phase amps i have a pair on a Boyueda S3 i bought second hand and built a pack with Tenpower 21700 40TG 35A cells, spotwelded 0.2mm copper strip for power handling, which is approx the same as 0.8 to 1.2mm nickel strip or 10mm of ripoff steel strip

Thank you for this amazing video, this is exactly what i want to do on one lf my scooters which has this exact OEM throttle, seems like it's gonna be a blast to ride!

Hey man, I was wondering if you knew where the right brake sensor is located (other than the one near the controller) I want to unplug it without opening up my seat.

Why did you decide to put the trigger on it and not like the motorcycle?

Your video is very useful! In the second link that you left below, there is an option with USB power, do you know if it is possible to use it on an ebike and connect the USB to the ebike screen?

I know it was years ago but FSESCs have terrible QC and fail often, earning them the name “flipshits” their motors are very reliable and pretty powerful, sometimes manufactured for other companies. The ESC does 100 amps per side but not 100 amps at 50 volts. At 1/2 speed the motors are at 50% battery voltage. I doubt it even does 50 continuous battery amps per side. The most powerful VESC made for esk8 is the SKP Solo for those interested.

flipsky like to overheat, extra heatsink and fans 👍 , i did same

Cześć, ja kupuje chyba zaraz laotie ti30, wyrwałem za 4200 + darmowe kugoo kirin s3, ta darmowa będzie dla brata może hehe. Myślisz że laotie po wstępnym ogarnięciu jak na innych twoich filmach jest fajna? Poza tym, ta trasa wygląda trochę jak tereny łódzkiego lotniska, gdzie to jest?

what you running imma do this

Hi there thanks for the video 👍 I have the same forks and I am having an issue where they make a kind of clunky sound on rebound. It’s sounds like they’re topping out , when they reach full extension. Do you have any idea how I could fix this or are they just cheep forks ? Thanks mate

Do the Laotie Ti 30 tires have to be under pressure? if so how much?

Właśnie zamówiłem hulaszke. Czy to dobry zakup?

Hi Pirate can you make a Basket support on boyueda, laotie ti30 on the rear spring site. This is awesome for daily pleas Pirate

FLIPSKY FT85BS V2.0 ESC works with it ! Thanks

Самокат едет с левой стороны, а на мониторе показывает справа. Очень опасно на дороге такая путаница.

Your scooter has a massive amount of inertia, I just got the G3 Pro and I checked if the pads are rubbing against the disc rotor and nothing but, after giving it the throttle it stops spinning in a second or two not like yours where it kept going and going until you had to stop it by hand.

👌

Nice 😉

Mam L8S i niestety zapomniałem o niej po ostatnim użyciu w czasie wakacji 2023r. Podłączenie zasilacza do hulajnogi nie powoduje zapalenia się lampki na czerwono, a hulajnoga tylko przez ok. 1 sekundę zapala światła by zgasnąć. Wszystko działa po podłączeniu zasilacza. Będę musiał wymienić akumulator :(. Po odkręceniu śrub coś nadal trzyma ten podest na nogi gdzieś tak w pobliżu kierownicy. Jedyne zdjęcie wnętrza tej hulajnogi znalazłem na Twoim filmie. Musiałeś użyć jakichś magicznych sztuczek, by zdjąć ten podest ?

When handling the motor, i recommend using some work gloves. When pusing the tire on/off its easy to get cuts on knuckles and fingers on sharp brake rotor

Wonder how many watts it uses but pretty cool id rather have both wides then not the one side... Or have it look right out the back instead.

I bought one for my E bike 3 days ago but it loop records like a car cam , but your one would have done me with the cheap price , maybe I paid too much from Amazon 💸💰🤣

I didn't even think about the camera, but now I will definitely put it on

Great idea...

zajebista sprawa...myslisz ze ta kamerka z zestawu do monitorka ma duzo gorszą jakosc niz np taka runcam swift FPV camera??

pads not moving same as other pads. how adjust without bleeding oil

I still have this Scoot and it is still working good , nothing has broken for 4 years , not good front suspension though , it still gives a hard clunk noise over bumps lol

Naaaais broo, camera looks good😊

Please try and get a Fiido Titan for testing if at all possible , then do all the mods and extra capacity etc , I have just bought the Titan about a weeks ago and would like to be able to copy any mods you can do on this bike , I am not clever enough to do these myself lol , thanks Pirate 🙂

Top

Very useful Thank you man 🎩

did it die

finally, i found the mad scientist, I like cutting wires too.