Homemade Professional Sandblasting Cabinet - DIY

In this video i have made a sandblasting cabinet, this sandblaster is a professional level sandblasting cabinet. 4 inches exhaust blower make sure crystal clear sandblasting. i used 16 gauge sheet metal. i did all bending and fabrication work at home with my homemade sheet metal bander. i used glass beads and aluminum oxide sandblasting media and i am very happy with results.
hope you will enjoy my diy projects videos
Subscribe My Channel Here
/ ironmanrestoration
If you like my this video may be you like my other videos
DIY Sheet Metal Bender - Diy Projects
• DIY Sheet Metal Bender...
Easy Way to Polish Aluminum | POLISHING ALUMINUM
• Easy Way to Polish Alu...
Professional Headlight Restoration | Headlight Restoration | Headlight Cleaning
• How to Clean Headlight...
#DIY
#Sandblasting
#Sandblaster

[@kentuckytrapper780]

Built like a tank, can't buy this kind of quality in a store. Great job.

[@IronManRestoration]

Thanks a lot

[@mrmidnight32]

Wild, I literally was thinking of how to make one of these in my head today. Didn’t even say it and an hour later this comes up in my recommended.

[@IronManRestoration]

Woooo This is Artificial intelligence.

[@lrdisco2005]

Expert build and that level of quality disappeared in the uk 40 years ago. No one wants to pay for quality when inexpensive poor quality equipment is freely available.
Respect.

[@J0hnSell]

Im currently half way through building a heavy duty one myself and been CONSTANTLY coming back to this DIY video for help. Thanks again for the awesome video!!!

[@IronManRestoration]

Good luck!

[@scottbrown8142]

Great job, I was going back and forth on whether to make or buy… you’ve proven it’s completely possible with out a great deal of equipment to produce a quality unit.

[@IronManRestoration]

Thanks buddy

[@xtremluck6260]

What a fantastic job! The amount of detail you showed is excellent. It's the kind of video a hobbiest can try building themselves. The only thing missing are the blueprint plans which you could sell I imagine if a link was available.
Will be checking out your other videos seeing the metal bender has one to watch....thanks.

[@LariFariYoutube]

This is an amazing project. Quick tip: You should put a (small) piece of rubber mat under the the worpiece / workarea.... Otherwise your sheetmetal mesh will wear out very quickly. Other than that, the thing is working great. Even tough, i would not paint it red.. ;) Well done... Greets from Germany

[@IronManRestoration]

Thank you and also thanks for good advice

[@pistolpete65]

This is very similar to the cabinet we used to use for cleaning parts from Mauser 27mm gun parts, was also very much used as a side line for cleaning alloy wheels. Good DIY cabinet, keep up the good work.

[@IronManRestoration]

Thanks

[@davidfrank2824]

You really did a great job. That looks better than the one I bought from the store. You have better lighting and a better window. I love how you put the gasket on the doors.

[@IronManRestoration]

Thank you David for appreciating

[@obywatelkonsument7349]

Mate, i think you have a FULL right to call your design and build "proffessional"! It was a pleasure to watch your video. I have to think about blasting cab like this. Thanks!

[@IronManRestoration]

Thank you cheers

[@3DPeter]

i also made my own sand blasting cabinet. I found a stainless steel under table with the perfect funnel, so all i needed to do is built the cabinet on top.
What i don't see in this video is a filter screen in the funnel ( a fine mazed mosquito net), and i made that in mine, so that bigger chunks of debris will
be filtered out and won't block the hose that sucks up the glass beads.

[@fireinthehead4280]

I loved every second of this. Awesome work and a big thumbs up for that homemade bender.

[@IronManRestoration]

Thank you 😊

[@marshal7102]

Now that is a BUILD, Great Craftsmanship and attention to detail. And works like a factory built Machine GREAT JOB!!!!!

[@IronManRestoration]

Thank you for apriciating

[@user-sf8nm1fr5j]

Outbox lamps on top is the best idea, Great.

[@drmosfet]

First time I've seen something interesting built with a buzz Box welder on CZcams👍

[@IronManRestoration]

Thank you

[@RandomHands]

Would you make one for me :) Good job Mate MashaAllah.

[@IronManRestoration]

Yes brother I can make one for you and that will be a gift for you from Iron Man Restoration

[@IronManRestoration]

Ok I will

[@connexphiri3708]

@@IronManRestoration i need one too please

[@joebrone4972]

You are SO awesome to watch.... Would you make me one too? Money is tight but I will PAY you as much as I can. I live in the Bronx, NY.

[@DraMazGaming]

Great project!! Do you have any scheme available for someone whos trying to do the same cabinet?

[@joewhitney4097]

Your blast cabinet turned out nice. It appears to work very well.
Thanks for sharing.

[@djamelhamdia134]

24:15,the sandblaster sandblasting the sandblaster.

[@teleluxcereris3125]

Questo progetto è qualcosa di veramente fantastico, realizzato in maniera eccellente in ogni dettaglio. Solo con l'esperienza e con i giusti attrezzi si possono giungere a tali risultati. La sabbiatura è a dir poco eccellente. Complimenti!!! Un saluto dall'Italia!!!

[@jacquespoirier9071]

truly a nice job,
unless you need a bigger unit, there is commercial units that are from a very similar design,
I've used such a unit that I modified to suit my application, in fact, I've designed and built a bead injector very similar to the one you use and I fabricated an enclosed light unit that I installed inside the cabinet, the major difference is that I've cancelled the air shut off valve on the blast gun and I've installed a foot operated valve outside the cabinet because the experience showed me that beads blocked the air shut off valve in open position.

[@IronManRestoration]

I appreciate you buddy

[@exhaustfumes927]

Props for stick welding that

[@Gerrit-Max]

I'm definitely gonna have to build one my self now.
I've got several items that need sandblasting but can't find anywhere to have it done at a reasonable price.

[@saveriobasta1791]

Well the white crystals sand works, you sandblasted the red painted grill too... doh! Thumbs up!

[@IronManRestoration]

Thanks

[@faizanjunaid1392]

Well done iron man sand blasting result is awesome. The sand blasting result look like silver colour and i cant see this type of home made sand blasting cabinet in other restoration channel you did a great job professionally & also using professional tools. 👍

[@IronManRestoration]

Thanks

[@ShortCircuitRu]

отличная работа! Маленькое замечание: сверло-чашка и ступенчатое сверло требуют низких оборотов сверления. На оборотах свыше 300-400prm начинают гореть режущие кромки. Тут нужна 2-скоростная дрель с низкими оборотами 1 скорости и с большим моментом. Ну и масла не жалеть, масло хорошо помогает сверлить такие отверстия.

[@kurtmelander5103]

One of the most impressive DIY builds I've ever watched. It sure would have been nice though if you would have sourced some of those parts that you used for those wanting to make something out of other materials, While I have a welder and electrodes, I'm nowhere proficient enough and little time to learn, I'm a Cabinetmaker, so I can do plywood one without too much trouble but would love to know where to get some of the fittings like the return mounted on the bottom, don't know what it's called so I wouldn't know what to look for, same with the grommets for around the glove openings, Those type things are what I need to find.

[@Carlitosway211]

Man that turned out fricking bad ass!

[@jhscheppele2448]

You could use a brass wood window lock for the hopper dump door.

[@jhscheppele2448]

How about a materials list? This is a real talented person, many skills.👍👍👍👍

[@IronManRestoration]

Thank you

[@clucci5094]

THIS IS AWESOME! Some sandblast cabinet manufactures explain why you shouldn't build your own cabinet as the quality is inferior. HA - SEND THEM THIS VIDEO - NO ONE builds them like this - NICE WORK BROTHER!

[@IronManRestoration]

Thank you so much for appreciating. Have a good day

[@patrickperry6945]

Very well done! Filming the use of it was also well done. Crystal clear.

[@IronManRestoration]

Thank you cheers

[@Restorationcircle]

You did a great job I also want to make this sandblast cabinet what are the dimensions.

[@Melnikov_Yuriy]

Шикарная, пескоструйная камера!!! Палец вверх🔝🔝🔝

[@luizantoniocarnevali1595]

SHOW.....CONGRATULATIONS!

[@IronManRestoration]

Thank you cheers

[@robertgilmour1903]

Perfectly clear, a thumbs up from me.

[@IronManRestoration]

Thanks Robert

[@obg6446]

Real good craftsmanship well done

[@IronManRestoration]

Thank you

[@ProPotato]

The first fab video I've seen where someone still has the guard on the grinder =)
Thanks for the build! Buying a large cabinet gets expensive, inspired to draw and fab my own to my requirements for my shop now.
And doing all this with a stick welder, nice one mate!

[@ToreDL87]

Cut myself with a grinder enough times to keep the guard on at all times now.
If I can't reach with a guard on = I'm using the wrong tool.

[@DytliefMoller]

Build a sandblaster to sand blast your made sandblaster :)

[@dimi5928]

JUST WOW!!!!!...SPEECHLESS.......

[@dale9896]

Great job mate, well done. Crystal clear blasting.

[@IronManRestoration]

Thanks

[@lapierretube1735]

Very effective 👍👍👍

[@IronManRestoration]

Glad you think so!

[@Angela_800]

after the gray, it should have been white first before the red, to give the red a more brighter color

[@onroaddrivingsim7635]

Masha'Allah ♥️

[@harcruiser3809]

its great your home made sanblaster,i like it very much,you may also give some comments

[@IronManRestoration]

Thank you cheers

[@bobjanis2091]

Excellent job, nice to watch a truly skilled craftsman

[@foxaholic4228]

Damn dude Great craftsmenship, I would gladly buy your sandblaster, over one of those cheap and expensive turds in a store. Great video ! Your very talented.

[@IronManRestoration]

Thanks for appreciating

[@foxaholic4228]

@@IronManRestoration If someone asked you to build them one ,what would you say ?

[@archael18]

I think the air vent control has some of the holes too big and close that you wouldnt be able to close it completely if you wanted to. There would always be a bit of an opening left open.

[@mladenfuntek6812]

jako dobro od prve do zadnje sekunde

[@lifeinformation5093]

Nice work

[@michealfigueroa6325]

Stick welding gauge steel is tough to do and filling plug welds is even tougher not to take away from a good project

[@MessyWorkshop]

Awesome job 👏 !! Exactly that i am thinking of build.

[@IronManRestoration]

Thanks

[@The_Absurdistt]

Absolute beautiful work. I really liked the look of the grey primer... I think I would have just clear coated the primer... but red is sexy too.

[@IronManRestoration]

Thanks

[@BG-hg7cp]

Awesome work. Material count probably coulda bought 3 or 4 from harbor freight but by tike this one needs replacing ud probably go thru all 4 harbor freight ones and some. Subbed for thr great diy content

[@IronManRestoration]

Thank you

[@BG-hg7cp]

@@IronManRestoration no problem. Hopefully I'll get to make me one soon for some of the project ideas iv got

[@exhaustfumes927]

Also if you don't mind I'd like a link
To that table top break

[@alonsobrosmann4300]

After the metal parts have been sandblasted , can the sand be reused or is sand added to the system again ?

[@IronManRestoration]

Sand recycling

[@tylershields1076]

I’d recommend flap wheels for grinding down your welds. It’s much easier to keep flat and avoid gouging so then there’ll be no need for body filler. Great build though

[@IronManRestoration]

Thanks

[@michealfigueroa6325]

Come on man, a flapper wheel is not going to help marginal stick plug welds in gauge steel

[@alexday2373]

Solid work mate.

[@eduardocampos5044]

Amazin and profesional result!!!! 👏👏👏👏👏👏👏👏👏

[@IronManRestoration]

Thank you

[@pauliebots]

Boy got skills.

[@rawpowervlad]

Excellent job on the build mate, can you please provide at least the materials list that you used for this project? 👍

[@redkachina]

superb workmanship

[@IronManRestoration]

Thanks

[@biggsteve1975]

Very nice build. That ax head gonna need a little work though.

[@IronManRestoration]

Thanks

[@waynehoch3009]

I'll take one!

[@alia176]

Excellent work building the cabinet and a great video. Your editing skills are superb as well as your fabrication talent. Thank you.

[@IronManRestoration]

Thank you cheers

[@Miricrafts]

Very nice, interesting sheet metal bending.

[@dwyanejetersr6470]

You sir have extraordinary talent, really enjoy watching you work, outstanding!

[@IronManRestoration]

Thank you so much 😀

[@kitchenwithrashi4688]

Beautifull video parfact 🌷🌷🌷🌹🌹🌹🌹

[@aldonjareno2017]

Awesome work. Question, how did you run your hoses inside? Did you seal it ? What size hoses and connectors did you use for the sand hose? Thanks

[@IronManRestoration]

6 mm

[@restaurandocoisasvelhas]

Excellent work my friend.

[@mickgiard1441]

wow nice job

[@IronManRestoration]

Thanks

[@bobbystanley8580]

Show off! Awesome job!!!

[@IronManRestoration]

Thanks

[@hoangnam3409]

Làm quá tốt bạn tôi

[@eslanderson5519]

Amei todo esse tutorial. Excelente
Obrigado

[@onroaddrivingsim7635]

Awesome 👍

[@IronManRestoration]

Thanks

[@kitchenwithrashi4688]

Beautifull video 🌹🌹🌹🌷🌷🌷

[@alphasigmasezon8597]

Excelente,

[@alphasigmasezon8597]

muito obrigado.

[@IronManRestoration]

Thanks

[@mohamedsayed-kq8eh]

well done

[@karzankerkuki4935]

crown are good tools

[@ApprenticeGM]

That's a terrific job on the sandblasting cabinet mate - well done and thanks for sharing. Your actual sandblaster / compressor seems very underpowered though, watching the speed of the sandblasting was painful, it was very slow and narrowly focused. Upgrade the compressor / sandblasting gun.

[@IronManRestoration]

Thanks for appreciating mate. I’ve upgraded my air compressor. Now I have 5 HP 2 CFM air compressor in my shop.

[@timhendrickson515]

I would strongly suggest a dust mask since most paint has lead

[@andrewt.c.wilson808]

watched 3 times ... awesome ... subbed

[@IronManRestoration]

Thank you

[@azedinezaari4120]

جميل جدا

[@jianny13]

Nice job my friend I need one for my here in Greece for me

[@IronManRestoration]

Thank you cheers

[@mushenji]

This is extremely good

[@markaldridge3213]

Great work Ironman you make it look very easy thank you.

[@IronManRestoration]

Thanks buddy

[@xaleRR]

looks good at the end but the welds ugh i dont like the weld

[@FERNANDOTADEUBRAUN]

Parabéns pelo trabalho !!! Abraço dos amigos do BRASIL

[@wannesvanhoudt6429]

really nice stickwelding. impressive

[@IronManRestoration]

Thanks

[@MirceaD28]

Work of art. Superb job.

[@IronManRestoration]

Thank you mircea

[@a.p.369]

Amazing project, well done. But, never weld with short sleves. It will burn your skin and may cause cancer.
One question: why did you paint it red? Every commercial cabinets are red. If I would make a diy, I would choose a different colour.

[@felipekrt]

Amazing project! ❤️❤️❤️

[@IronManRestoration]

Thank you

[@marcioferreira5559]

CONGRATULATIONS, this is wonderful work!

[@IronManRestoration]

Thank you cheers

[@ann3_fr4nk_2k7]

Cristian Casoni
for 5 months ago:
CONGRATULATIONS, this is wonderful work!

[@noureddinelatreche2675]

يعطيك الصخه انتا معلم

[@giovanni7426]

Lavoro a dir poco eccezionale super professionale complimenti.

[@IronManRestoration]

Thanks

[@lemat3219]

superb

[@vinceianni4026]

Hello mister very good job well done I like it thank you Vince

[@IronManRestoration]

Thank you too

[@shahidabbas-qp8ou]

You did a great job bro

[@Manufalket]

Like 12 my friend

[@jasimalhosani8980]

Great work nice one for restoraiton projects thank you for good video .

[@IronManRestoration]

Thank you cheers