Old Rusty Drill Press Restoration - Restore Drill Press
Vložit
- čas přidán 24. 07. 2024
- This is an amazing restoration of an old rusty drill press. I found this drill press in a scrape yard which was very rusted broken and burned. This restoration was very difficult.
In the first half of the video you will see disassembly, sandblasting, welding, machining and dent repair and the second half of the video you will see paint , metal polishing and assembly.
I hope you will enjoy my impressive restoration video.
Homemade Professional Sandblasting Cabinet - DIY
• Homemade Professional ...
Subscribe My Channel for more restoration videos
/ ironmanrestoration
#Restoration
#Drillpress
9:05 maybe use an anvil instead of the pulley as a backer for flattening dents
Flywheel grinder at your local truck stop for the bed and base is the Only thing I would have gone the extra mile for, just to set off since you went the extra 100 miles. Nicely done.
Great re restoration. This drill press looked like a hopeless piece of junk, but you made it in to a useful tool again. I would liked to have seen how you rewired the drill press, but it's an excellent result. Thanks
Thank you Pat Johnson for apriciacting
Not a big fan of the paint job, but cool that you restored it to it's full glory.
Nice repair..as for color..it's your shop and your tools.do what you want with em.. Thanks for the video.
The result is perfect, thanks! Radek
Excelente trabajo, felicidades
Muito bom.
Great job 👍 iron man .you performed all job professionally like, Handel liver ,denting painting, weld a broken metel piece 👍
Отличная работа!
Привет из Беларуси 🇧🇾
Какая же отличная работа? Он забыл (наверное отвлекся на покраску шкивов) отпескоструить пиноль!
This video should be called "Having the right tool for the job."
In my opinion powder coat would have been great for this project. Great job
I think so too!
Greet wandar full
Só Beautifulll Machine .
Indeed!
Very systematic and great work!
Thank you 😊
Almost perfect! I'd make chamfers on both parts before welding so the weld can hold the material better!
If you weld it's better to do a 45 degree phase on both sides so the molten mettal can penetrate deeper into the component. Anyhow nice job bringing an old machine back to live. well done!
Have this same drill press. Heavy sucker. Pay $30 for it 5 years ago. Replaced the spring, Cleaned it up and put a new belt. Works great. Probably not the most precision’s drill press, but does the job, well.
Well WHAT !! DO !! YOU !! EXPECT !! FROM !! PLANET !! CHINA !! THEN !!??
White and blue makes it look like a toilet with a high level cistern 😁🧡
Sweet 👍🏻 👍🏻
The white color for the drill press is impractical. Generally, paw up.
Nice Work👍🏻👍🏻👍🏻
Hard work but you did it. I enjoyed thanks
DREAM ! ON !! HAVING !! ONE !!
nice work👍
참 잘 하셨읍니다 나도 보르방을 가지고 있는데
온래된 중고 인것 같은데 내것 보다 더 좋은것 같읍니다
영상 잘 봤읍니다
What a wonderfull job !!
Great job, enjoyed watching the video. And very useful addition to your workshop.
Amazing very well done. Thanks for sharing that was very satisfying to watch.
Hard work but very good result
What a difference!
It's STILL! THE ! SAME ! DRILL ! PRESS !!
You guys amaze me with your skill and knowledge about all things needing restoration. Do you do a lot of research on each item? The mind boggles!!
Thanks for appreciating. Yes I do a lot research
To make it work, switch no 😂
Well done btw.
top notch man awesome colour choice as well
Not gonna lie man I love you work. It looks awesome!!!!
Thank you
wow! excellent!! what a great job!!! congrats!!!!
Thanks
I was dying to use the lathe to clean up that backbone pipe. Colours, well, it's your call.
awesome job...i like the sandbaster..and outcome of your redtiration.
Too ! Much!! Toliet ! Colour ! Used !! Here !!
Not being in anyway skillful enough to carry out this type of work, it always amazes me how you remember where all the pieces go back! Love watching you do it.
Thank you cheers 😊
These older Taiwan-built drill presses are very simple to break down and rebuild. There are literally dozens of CZcams vids on the process, and they are all similar enough that you really can't get into trouble. You might be surprised at how intuitive it is to reassemble them. Like every skill, it just takes time and repetition.
A drill press is a invaluable tool, and a great beginner project. Despite the funky handles, the fact that the table was in such good shape was a huge clue that this drill press was probably worth fixing
Just how long does it take you to undertake a project such as this? Fascinating video. Many thanks.
Think I would have went with a pastel ( color), VERY NICE JOB.
Thanks
Man ASMR
A little bit oil and grease would have been nice while reassembling, to not repeat the whole process again the next time. Other things may also could be improved. Nevertheless excellent work there.
great
after your done sand blasting and before you paint, throw 3 or 4 coats of high build sandable primer on it. then you can deck out all the pitting.
You big master👍👍👍👍
Very good restoration only one problem is the white painted parts
Gosto muito do seu trabalho, mas não vejo uma lógica em usar escova de aço e ao mesmo tempo usar jateamento...
Nice job!!
This looks just like mine, a Packard(?) from 1981. Mine has 3 pulleys, with only surface rust.
that thing looks solid, I wonder how much wobble you have in the spindle. The quill is much better than lets say ZX7016 as it has a grove in the quill. body Casting is a bit thin though. Still id be happy to get one like this one.
Drill Press white ?!?!?!
How does it work without a belt? 🙃
👏👏👏👏👏
Holy crap, that's the same drill press I have!
Same here, but would it be taboo to say where it was made?
I'm about to start getting into these restorations and I'm curious what do you do for the parts that are finished to the bare metal again. Do you put any oil on the surface or no? I guess I'm just curious about it rusting again and is there something to do for that. Thanks and great work brother
How do you remember the way to put it all back together?! If I put it back together, it'd either look like a different machine or a junk pile I made
If only there was some way to make a video record of the disassembly that you could refer to.
@@TheHoipoloi haha get I guess you could just go back and rewatch it, I'd just get really confused
you are really awesome in restoration project well done
Waooooooow niec work 👍🏾
very nice.
Good work man I am not a fan of the colors but if it works it works put it to good use 🤟
Right on
TOILET !! COLOURS !!
Amazing job, all rust removal, polishing and grinding, restoration are very clearly and long-time working ....Big hug. 🤟
Thanks 😊
NICE !! METAL !! SHREADDER !! MATERIAL !! THIS !!
Great job . Very good job on the motor.
Thanks
The Motor ! Looked !! MIRRORED !!
белый цвет: красиво, но не практично абсолютно. Загадится мгновенно. Т.е. получился красивый экспонат. Работать на нём категорически не рекомендуется.
Beautiful work
Thanks
Over all good restoration. The only thing that grinded my gears was how you didn't do anything about the pitting. Other then that, great job
Great video
Thanks
restore old damaged drill success
Great results! I've subscribed to see more :)
Thanks for the sub!
14:46 ...Doggy Style ...😁😂😅
Bruh moment
Cool video! But why did you use the stick welder when you’ve got a mig?
Thanks. I haven’t had mig wire for cast iron welding but I had cast iron electrodes thats why I used stick welding.
Well why didn't you get ! Mig wire !Then ! ??
Looks great well done.
Thanks
TOO !! MUCH !! TOILET !! COLOURED !! LOOK !! HERE !!
👍🇲🇽
Love those pully offer clampy thingies
👍👍👍
Отличная работа!
Только красить станок в белый цвет нерационально. Быстро перестанет быть белым.
🌹🌹Top🌹🌹
🌹🛠💀🛠🌹
I like the color 👍💪
Awesome👍
2nd switch for a light?
Awsome restoration! That drill looks better than new now!
все красиво, но не все проблемы решаются краской. С мотором-то что? Если он так заржавел, то лак на обмотках тоже сильно пострадал. И краска тут не поможет. Ну и мелочи, вроде пескоструйки сопрягаемых поверхностей. Кто в теме, знает, что так нельзя.
Sand Blaster Work Is Owesome ...Too Owesome Restorations You Did In Your Channel✌🏻✌🏻✌🏻
I'm so Interesting your restoration for the old Drill Press and how much your cleaned very nicely.
how much it cost for this drill press ?
I did not calculate cost
Thanks I’m looking one for my shop got second hand here but to expensive recently asked a shop here cost 500g
Two questions, please: When you reassembled the press, it looked like you greased some points, but not others. May I ask what parts of the internal mechanism that you greased, please? Also, I love the polished surface, but what is frustrating for me is how quickly the exposed iron rusts. I've tried Johnson's Paste Wax and other sprays, but haven't found that they last very long. What do you use, please?
I greased moving parts. And I have a detailed video of metal polishing on my channel you can watch and learn.
how you use electrode weld in a cast iron piece? o.o
I use cast iron electrodes
😯
대한민국
Ha ha, the on switch now says no.
What type of Bearing Puller you used at 1:47.
Could you help me to find that puller?
This called bearing extractor
What Country are you in !!?? Any Good hardware Store ! Sells Bearing Pullers !!
Pully size....????
Meet ! The New ! Drill ! Press !
SAME !! AS !! THE !! OLD !! DRILL !! PRESS !!
I'm looking for the electrical part on the restoration process, wherein at first you did cut off the wires.
Вещь похоже не китайцы делали....более качественно сделана.
Only one mistake is the white paint but the rest is very good
What is the low rpm speed?
I love how he just liked your comment, he was like "yes"
Way ! Too !! Fast !! R.P.M !!
BRAVO MAN THAT,S BEAUTIFUL WORK THANK I LEARNED A LOT.
Any way to restore the original plate from the manufacturer?
Слишком коротко, больше подробностей и мелочей!
☺️
I think I might be ruined for restoration videos from watching too much my mechanics. Nice work though 👍🏼