CARLY CODING OPTION: You will need to de-activate the following... Braking lights voltage monitoring 1/2 • not active Voltage monitoring for braking lights. Might cause flickering of LED lights. (FRM) Braking lights voltage monitoring 2/2 • not active There should be a "Rear turn signal" that needs to set also, if I remember correctly. Deactivate with ‘Braking lights voltage monitoring 1/2′ to disable flickering of LED lights. (FRM) Tail lights voltage monitoring 1/2 • not active Voltage monitoring for tail lights. Might cause flickering of LED lights. (FRM) Tail lights voltage monitoring 2/2 • not active Deactivate with ‘Tail lights voltage monitoring 1/2′ to disable flickering of LED lights. (FRM) Turn signals rear voltage monitoring 1/2 • not active Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (FRM) Turn signals rear voltage monitoring 2/2 • not active Deactivate with ‘Turn signals rear voltage monitoring 1/2′ to disable flickering of LED lights. (FRM) Hope this helps guys!
I cant thank you enough for this video. I have just bought a trunk lid and am going to do the same conversion and your explanation of swapping the wires around is perfect!
I’ve done most of these mods to my car. Started off with a basic SE spec pre lci 320d. I’ve changed the interior to leather m sport, changed alloys to 18 inch m sport, rear bumper, interior trim and few other small things. Wanna get a dual exhaust like you’ve done and do the front bumper too. Then I think I’ll be happy. But tbh if you’re into your bmw then you are never happy with it always wanna do more lol
@@BIGHUS I just wish tail lights were a bit cheaper here in Serbia they are around 250euros. Although trunk is pretty cheap 100euros. But it seems like a really easy 2-3hour job which brings this car to life.
Still having issues with my setup. I'm having problems where the reverse light wouldn't stay on, now how I have it wired up the main bulb in the inner lights won't come up. I think they're suppose to come on when you apply the brakes.
Hello, I have a problem with the lights, the brake light stays plugged in, and the fog lights, could you also tell me what order the cables of the side lights are in to adjust?
The rear brake lights didn't work everything worked perfectly but the rear brake lights didn't only the third brake light is working can you help please?
@@BIGHUS I’m just waiting on the bootlid, got the lights and asked my friend if he’ll clear the faults for me and he said they’ll just keep popping back up. I might just buy Carly cause I’ve always got faults popping up anyway 🤣😩
My garage is gonna do it monday , its there frist time , can we contact u if we have question for the whire ( mayby they will know bt i dont want any surprises 😄 looks sick btw ! Keep uppp
I used a Carly Coding Adapter 2nd Generation, you can find details in my comment from myself or download the Carly app and it will direct you to a link
Omg.. i really want to do this conversion so bad.. but i dont know about the carly thing.. it would be very much appreciated if you could explain the carly thingy.. i mean how do you decode the signal error?
I have a 318i lci with the halogen halo bulbs. What bulb do I need to make it look white? Also you should put bmw logo lights under the door. Nice vids
Nice, i've already got the BMW lights installed under the door but think I need new ones as they are abit faded. Thanks for the support. I've got HIDs at the moment but I used to have H7 Diamond White bulbs and they were the closest to HIDs so i'd reccomend those
Did you have any trouble with the reverse lights working ive currently just done this conversion but my reverse lights not coming on i have changed the wires in to the order that you have i have changed the reverse bulbs to new ones and coded the indicator flashing with BimmerCode but just carnt get my reverse lights to work any help would be much appreciated
You will need to de-activate the following... Braking lights voltage monitoring 1/2 • not active Voltage monitoring for braking lights. Might cause flickering of LED lights. (FRM) Braking lights voltage monitoring 2/2 • not active There should be a "Rear turn signal" that needs to set also, if I remember correctly. Deactivate with ‘Braking lights voltage monitoring 1/2′ to disable flickering of LED lights. (FRM) Tail lights voltage monitoring 1/2 • not active Voltage monitoring for tail lights. Might cause flickering of LED lights. (FRM) Tail lights voltage monitoring 2/2 • not active Deactivate with ‘Tail lights voltage monitoring 1/2′ to disable flickering of LED lights. (FRM) Turn signals rear voltage monitoring 1/2 • not active Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (FRM) Turn signals rear voltage monitoring 2/2 • not active Deactivate with ‘Turn signals rear voltage monitoring 1/2′ to disable flickering of LED lights. (FRM) Hope this helps
@@BIGHUS I have to de-activate the "reverse light" too, otherwise the warning light will come up whenever I put the car in reverse. Does this happen to you?
Hi I got it from facebook market place mint condition as I don't think it's worth putting brand new lights. You can also check in Ebay. Hope this helps :) Love to my French fans✌
I have some questions: - If I do the wiring shown in the video will I still get error codes on my dash? - if yes, will an icarly adapter remove these? - also will an Icarly adapter remove flickering off my front lights (I have LEDs) Thinking of buying a Carly adapter. If it sorts out all the codes etc
Is it essential to code the lights with carly for them to be functional i.e brake lights & indicators flash? As i have all the parts but carly is on order so i would like to put them on while i wait & just suffer with fast indicators for a few days 😂
@@BIGHUS if you want some more umff out of your car I suggest a sprint booster for your gas pedal as it makes a huge difference on the driving experience around 200$ and a chip tune box, I got one few weeks ago of eBay for 58$ pro speed next! Both from Europe first is made in my country Greece and second one came from Poland! I have these on top of a map tune and the car drives really strong!
CARLY CODING OPTION:
You will need to de-activate the following...
Braking lights voltage monitoring 1/2
• not active
Voltage monitoring for braking lights. Might cause flickering of LED lights. (FRM)
Braking lights voltage monitoring 2/2
• not active
There should be a "Rear turn signal" that needs to set also, if I remember correctly.
Deactivate with ‘Braking lights voltage monitoring 1/2′ to disable flickering of LED lights. (FRM)
Tail lights voltage monitoring 1/2
• not active
Voltage monitoring for tail lights. Might cause flickering of LED lights. (FRM)
Tail lights voltage monitoring 2/2
• not active
Deactivate with ‘Tail lights voltage monitoring 1/2′ to disable flickering of LED lights. (FRM)
Turn signals rear voltage monitoring 1/2
• not active
Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (FRM)
Turn signals rear voltage monitoring 2/2
• not active
Deactivate with ‘Turn signals rear voltage monitoring 1/2′ to disable flickering of LED lights. (FRM)
Hope this helps guys!
FINALLY. THE WIRING. SHOWN. CLEARLY. THANK YOU
I know, I hope this helps :) I did the best I could
I cant thank you enough for this video. I have just bought a trunk lid and am going to do the same conversion and your explanation of swapping the wires around is perfect!
Best of Luck! Thank you for your kind words. 👍
9 months on and this video is still 🔥. In depth explanation and actual footage. Awesome help, awesome video bro
Appreciate the love bro ❤
Done this today, so happy with the results. Big thanks to you for this video 😎😎
My pleasure mate! Awesome glad this helped 👌
Can I ask where you got the rear bumper from? A link would help
I’ve done most of these mods to my car. Started off with a basic SE spec pre lci 320d. I’ve changed the interior to leather m sport, changed alloys to 18 inch m sport, rear bumper, interior trim and few other small things. Wanna get a dual exhaust like you’ve done and do the front bumper too. Then I think I’ll be happy. But tbh if you’re into your bmw then you are never happy with it always wanna do more lol
I know exactly how you feel😂 Brilliant project, got myself the front bumper after so long, soon to be installed
@@BIGHUS nice one bro, drop the video soon InshaAllah
Looks much fresher. I’m going to do this to my e90, the boot lid is rusty so may as well freshen up the rear … thanks!
All the best! Thanks man
Massive improvement G. Nice to see another vid
Appreciate that G. Respect 👊
Bro this makes e90 look so much newer and better. Might do lci trunk conversion on mine already did headlights upgrade.
Definitely bro 100% and i've got the front full Lci M sport kit waiting to be put on 🔥
@@BIGHUS I just wish tail lights were a bit cheaper here in Serbia they are around 250euros. Although trunk is pretty cheap 100euros. But it seems like a really easy 2-3hour job which brings this car to life.
I’m currently doing the swap and I’m having trouble pulling out the wires and re-wiring them. Do you have any tips?
Looks sick bro massive differents am currently in middle of doing mine
How did it go?
Great work, especially with showing the wiring sequence !
Still having issues with my setup. I'm having problems where the reverse light wouldn't stay on, now how I have it wired up the main bulb in the inner lights won't come up. I think they're suppose to come on when you apply the brakes.
No, brake lights are only on the main tail lights not the inner tail lights so I'm not sure what you are meaning.
@@BIGHUS what is the non reverse light bulb inside the inner lights for then?
Thats your rear fog lights
big hus i love your videos man keep it up bro I also am a bimmer fan
Appreciate the support bro 👊
I no you used I Carly How did you code out the light and slow the indicator thanks
How to stop the fast indicating which bit do I de code
Huge improvement
Appreciate it 👊
Hello, I have a problem with the lights, the brake light stays plugged in, and the fog lights, could you also tell me what order the cables of the side lights are in to adjust?
I would just experiment with the wires until it works properly like the video shows buddy
The rear brake lights didn't work everything worked perfectly but the rear brake lights didn't only the third brake light is working can you help please?
Where did you get your window visors(wind defectors) been looking for some too 👀
Found these on Ebay by the branding iSpeed
What about the lock? How did you manage a backup system to open the trunk in case the lock fails
Looking sick 💎💯👍🏻👍🏻 broo
Once you do the coding, if a bulb goes bad you wont have an alert on dash, will you?
Such a helpful video, thank you 🙏🏼
Has anyone who’s done this had any issues with the faults coming back after being cleared?
My pleasure, glad it helped :)
My faults have not come back even to the present day? Did you use Carly?
@@BIGHUS I’m just waiting on the bootlid, got the lights and asked my friend if he’ll clear the faults for me and he said they’ll just keep popping back up. I might just buy Carly cause I’ve always got faults popping up anyway 🤣😩
Unsure of that, I definitely recommend Carly and select all the options I listed in the comments. Bmws full of fault codes 😂 All the best :)
@@BIGHUS thanks hus, subscribed for future mod inspiration 👍🏼
I appreciate your support😃 thank you take care 👍
My garage is gonna do it monday , its there frist time , can we contact u if we have question for the whire ( mayby they will know bt i dont want any surprises 😄 looks sick btw ! Keep uppp
How did it go? :)
Bro could you share the link for the adapter your using to solve the fast flashing indicators plz
I used a Carly Coding Adapter 2nd Generation, you can find details in my comment from myself or download the Carly app and it will direct you to a link
Hey bro do you have a site I should go to in order to buy new lci taillights. My right one is cracked and I need a new pair but I CANT FIND ANYYY
still blows me how modern the lci looks like and the pre lci looks so fckn old. front and thge rear
Bought a e90 already converted, lh side reverse live doesn't work, tried new boards, bulbs ect, wonder if the plugs are something to do with it
Hi Big Hus, I have the Carly 1st Generation Will This Procedure Work To Code in With It as I don’t want to waste €90… 🙏
Yes should do buddy
Omg.. i really want to do this conversion so bad.. but i dont know about the carly thing.. it would be very much appreciated if you could explain the carly thingy.. i mean how do you decode the signal error?
It's straightforward when you have the app on your phone. Once you have the device and app follow my pinned comment on this video. Hope this helps
Were a you get these rear trunk amortizators? I want too.
Emerald Struts
After this, everything works except my trunk boot light doesn’t turn on after opening the trunk. Any fix ?
Thats strange is your boot light wired correctly?
@@BIGHUS I put in the face lift lock that’s why it didn’t work…
I have a 318i lci with the halogen halo bulbs. What bulb do I need to make it look white? Also you should put bmw logo lights under the door. Nice vids
Nice, i've already got the BMW lights installed under the door but think I need new ones as they are abit faded. Thanks for the support. I've got HIDs at the moment but I used to have H7 Diamond White bulbs and they were the closest to HIDs so i'd reccomend those
Do the LED lights actually fit into the gap the regular light bulb lights leave even with the extra reverse light section...?
Did you have any trouble with the reverse lights working ive currently just done this conversion but my reverse lights not coming on i have changed the wires in to the order that you have i have changed the reverse bulbs to new ones and coded the indicator flashing with BimmerCode but just carnt get my reverse lights to work any help would be much appreciated
What are the options that need to be coded out/disable via Carly?
You will need to de-activate the following...
Braking lights voltage monitoring 1/2
• not active
Voltage monitoring for braking lights. Might cause flickering of LED lights. (FRM)
Braking lights voltage monitoring 2/2
• not active
There should be a "Rear turn signal" that needs to set also, if I remember correctly.
Deactivate with ‘Braking lights voltage monitoring 1/2′ to disable flickering of LED lights. (FRM)
Tail lights voltage monitoring 1/2
• not active
Voltage monitoring for tail lights. Might cause flickering of LED lights. (FRM)
Tail lights voltage monitoring 2/2
• not active
Deactivate with ‘Tail lights voltage monitoring 1/2′ to disable flickering of LED lights. (FRM)
Turn signals rear voltage monitoring 1/2
• not active
Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (FRM)
Turn signals rear voltage monitoring 2/2
• not active
Deactivate with ‘Turn signals rear voltage monitoring 1/2′ to disable flickering of LED lights. (FRM)
Hope this helps
@@BIGHUS I have to de-activate the "reverse light" too, otherwise the warning light will come up whenever I put the car in reverse. Does this happen to you?
hey how are you mate. I am from france i wanted to know where you got the lights
Hi I got it from facebook market place mint condition as I don't think it's worth putting brand new lights. You can also check in Ebay. Hope this helps :) Love to my French fans✌
Did you trunk come like that that automatically opens when you unlock
No, I upgraded the boot struts to auto open. You can find it online from Emerald Struts 👍
@@BIGHUS appreciate it my guy 🙏🏽
Hey men. I guess I had a m sport all this time. but I want the F80 tailights do you think that would be posible? Lol
Is this the same process for e91 (touring)? Thanks
I'm afraid I don't know as i've never known anyone to this to a touring e91
@@BIGHUS no worries bro, appreciate you coming back to me
so you can use your priviest wiring? all you gotta do is swap the pin wiring?
Yes just swap them about. No need for any adapters or replacement of harness etc
@@BIGHUS thanks man i’m doing this tmr
Best of luck buddy
I have some questions:
- If I do the wiring shown in the video will I still get error codes on my dash?
- if yes, will an icarly adapter remove these?
- also will an Icarly adapter remove flickering off my front lights (I have LEDs)
Thinking of buying a Carly adapter. If it sorts out all the codes etc
Yes all removed from my Carly adapter.
@@BIGHUS thanks bro I used your video and done the icarly and everything worked perfectly! No error codes using I Carly and everything fit perfectly
Where do I buy the trunk/taillights to do the conversion?
I bought mines from a salvage dealer. I believe these parts can be found at a salvage dealership or online
Is it essential to code the lights with carly for them to be functional i.e brake lights & indicators flash? As i have all the parts but carly is on order so i would like to put them on while i wait & just suffer with fast indicators for a few days 😂
Yes definitely need Carly unfortunately
looks sick btw whens part 3 out
Thanks, soon... :)
How does your boot open up mate? Mine just unlocks the boot.
I switched the boot struts, I bought it from Emerald Struts. All you do is replace it and it works :)
Eso se puede hacer en un e91??
Looks awesome! Will you be doing side mirrors?
Thank you, yes i'm looking into that
Where did you get the spring for the boot struts?
Emerald Struts
Hi bro it looks crazy 🤪 I would like to make one as well. Carly adapter does the coding job for you? Thanks 😊
Haha thanks, yes carly adapter did the trick :D
@@BIGHUS thanks mate😀
Do you need to change the light modul to make this Conversion?
Not needed. Just swapping wires
@@BIGHUS I alredy do it 2 mounts agoo 😄 But thank you anyway 💯
Do those gas strats have a part number or you can point from what car these come from?
From a brand called Emerald Struts
@@BIGHUS thanks brother I just placed the order! Keep in touch I also have a e90 320d and is an ongoing project as yours!
@@BIGHUS if you want some more umff out of your car I suggest a sprint booster for your gas pedal as it makes a huge difference on the driving experience around 200$ and a chip tune box, I got one few weeks ago of eBay for 58$ pro speed next! Both from Europe first is made in my country Greece and second one came from Poland! I have these on top of a map tune and the car drives really strong!
The wiring change with the inner tails is universal ?
Just with this vehicle mate
@@BIGHUS no i went with his wiring order and it worked!
Vous parlez français ?