Moons MC Tail Light WITH integrated turn signals install (Low Rider Build Series ep 7)
Vložit
- čas přidán 21. 04. 2020
- The perfect solution to turn signal relocation WITH added safety features?? I'm in!
Moons MC makes a SICK product & their customer service & shipping is equally great! If you don't want to cut & solder like I did I did include a link to the wiring harness as well. Please like & subscribe it helps my channel a ton!!
Guerrilla Cables Wiring Harness: guerrillacables.com/2018-2020-...
V2 Moons MC Tail light: www.moonsmc.com/collections/f...
V1 Moons MC Tail Light: www.moonsmc.com/collections/f...
Moons MC Black Bezel: www.moonsmc.com/collections/f...
Moons MC Load Equalizer (incase your bike can't handle the LED's): www.moonsmc.com/collections/f...
GO GET YOUR RIDIN DAD MERCH - teespring.com/stores/ridindad
My Bikes
2020 Harley Davidson Low Rider S
-Low Rider Build Series Here
• Low Rider S Build
2020 Honda Grom
-Grom Build Series
• Grom Build
My Current Motovlog Setup
-Gopro Hero8 Black www.amazon.com/GoPro-HERO8-Wa...
-Gopro Media mod www.amazon.com/GoPro-Media-Mo...
-Media Mod Light attachment www.amazon.com/GoPro-Light-Mo...
-Sony Omnidirectional Mic www.amazon.com/Sony-ECMCS3-Om...
-Sony ICD-UX570 Digital Voice Recorder www.amazon.com/Sony-ICD-UX570...
Editing Software
-Cyberlink PowerDirector 365 www.cyberlink.com/products/po... - Auta a dopravní prostředky
It looks great!
Nice job on this !
Thanks man! I appreciate that
Clean install! I am going to look into Moon’s!
Thanks man!! They make a good product. Lots of lighting upgrades
Cant wait till this one comes back in stock so i can do mine! thank you for a Great Video!
Sounds good man! My pleasure, good luck!! Hopefully they come back in stock soon
Does that black bezel fit the 2020 lowrider s? fitment says only till 2017 😟
I believe so. But honestly man, for the price you’re better off either buying some black wrap on amazon for 10-15 bucks or taking it to a wrap shop. You already have the circuit board and that’s what drives the price up so much. I’m gonna wrap mine. It’s an easy shape and small
Bike looks great good job man!
Thanks brother!!
Everyone's installing these Moon empty integrated tail light everyone shows you how it looks with the left and right turn signal then hits the brake but no one shows you how it looks when you have the brakes applied thank you so much
Welcome! I feel like that’s a very important part. I’ll also add that the version to here is pretty hard to tell which direction I’m turning according to everybody I’ve written with. Especially when the break is applied at the same time as the turn signal. The version three that they have looks like that design flaw has been taken care of and the turn signals are farther spread apart from each other and more noticeable
Looks good
Thanks man!
Good stuff
Thank you! 👊🏻
Just got a 06 Dyna Super Glide and was looking at this taillight. So, thanks for the video. Don’t think the process is too far diff from your bike. #NewSub
Awesome! I used to have a super glide custom man. Yeah, the process should be very similar.
Great vid on this product and install. I see this in my very near future. My only question for you is what did you use to cover the holes/space of the old blinkers? Keep up with the great videos and ride safe.
Thank you man!! I've looked for covers for those but can't find any. It doesn't bother me too much because I'll have FXR Division bags covering those holes in a few days-which is why i deleted the stock signals anyway. They don't stick out too bad. If you were to go bagless and leave the holes over time you probably wouldn't even notice it.
That’s badass I like it strobe effect
For sure man. Makes it harder for people to ignore ya! Moons are they only people I've seen integrating it
Ridin Dad mine doesn’t strobe. Did you have to do something to enable this feature?
I can’t speak for the other versions but if you have the same version I do there’s a little red button/switch on the interior of the light. (Backside). Just clicking that toggles the strobe on and off
Ridin Dad I see. Thanks brotha.
👊🏻
Did u have to get a gasket to use or is a gasket not needed? Stock light has that foam plate inbetween the light and the housing the moons one i got does not have any foam or gasket material
I just installed mine as is. I honestly don’t remember how mine looked. If you’re in doubt just call up moons or send em a message on ig. They respond super quick in my experience. I do know their unit is completely internally sealed though so I wouldn’t really worry
"The Ringer" Oh my god that movie. Everytime I see the "WHEN THE FUCK DID WE GET ICECREAM?" and see Johnny Knoxville almost lose his composure, I bust up laughing so hard.
Lolol. I just rewatched it recently again and it’s so funny!! My favorite is the scratched cd part
Looks dope !
Just one question : In the description you put the link for the tail light base but on the Moons MC website they say that it's for Dyna.
Do you think it fits anyway on a 2020 FXLRS ?
Yeah it’s all the same base. But you really don’t need it for the new bikes cause they have the new circuit boards. That’s why it’s marketed for the dynas because they didn’t have the new boards
@@RidinDad thank you very much for your Prompt feedback !
So if I understand well I just have to paint the stock base light If I want a full black look ?
@@pierreguyonvarch6142 yeah just the bezel. I did a video where I wrapped mine in black vinyl for super cheap and it was very easy too. If you have a 2020 FXLR or S you'll have the correct circuit board but will need the wiring harness that guerrilla cables makes to run the break and turn signals to the tail light if you want to use the turn signals in the tail light. If you just want a black bezel then paint or wrap and you're good to go man!
@@RidinDad Thank you very much !
No problem man 👊🏻
It improves the look, just wish it didn't have that light shape, makes it very confusing as to which side it is pointing
I don’t think so really. I think it’s pretty easy because they are arrows. There is a new version that spaces out the lights more though
V3 version solved that problem, visible perfectly
So, what I think I'm getting is that if I want to totally eliminate the rear turn signals and don't want to do all the rewiring like you did, I need the harness?
Jason Hall yes the harness makes it easier for you to not strip, solder or reconnect wires.
Absolutely. I see someone beat me to it lol but you're both correct. Harness is easiest and the only way to avoid soldering or cutting anything.
@@RidinDad Good deal, and thanks for the video.
Ever have any issues with inspections since those back turn signals are ‘close’? I worry about that passing in my state. Otherwise id do this mod yesterday.
Idk man. I live in a very fun state lol. We don’t have inspections on any vehicles at all!
Do you need a load equalizer with these integrated tail lights?
I did not but I know someone who did
Doing this same light right now , from the stock Wires you have one black wire and one purple wire on each side , you put them together . How did you wire the black and purple wire from each side ?
I’m a little confused lol. Are you talking about the turn signal wires? It’s been a while since I did the install but if I remember correct one of them on each side is just a ground wire and the tail light itself is already grounded from the actual break and running center light so if those are the wires you were talking about I just cut them and kept them off because the tail light is already grounded from the main attachment
Did you use the same gauge wire for the extension ?
Pretty much. Little bit thicker if anything
What if I just wanted to replace the brake light and leave my blinkers on. do I still have to take off the fender and everything or is it just plug and play.
It's Zebuh yeah man just plug and play. Might take you all of 3 minutes lol. Super easy if you’re just switching the light out.
Ridin Dad Okay awesome thanks! I was just double checking.
How was the wires secured to the fender
I zip tied them to the rubber piece already there that secured the main brake light wire to the underneath of the fender
Just subscribed, just bought LP bags, will need to relocate rear lights. Buying moons mc light. Is it pretty easy to relocate?
Thank you sir
Thanks for the sub! Leather pros are sweet man! I think it's very easy. You can either go the cheap route like I did in this video & cut & solder some stuff. Or you can go completely plug & play with a new wiring kit. Up to you man but either way you'll be good. I think it's easy & very doable. If you want to check out that cable I posted a link to it in the description of this video. Hope this helps man!
Here's the link! guerrillacables.com/2018-2020-softail-rear-fender-harness/
Appreciate it💯💯
Purple wire is hot wire, what about the other one? What do I do with it and how?
Do t remember off hand which wires do what but if you follow what I did it’ll work
I’m about to install signal extensions and saddlebags… Did you disconnect the battery before doing this?
I know a lot of people do, but I never have. No matter if I am doing handlebar jobs or turn signal exchanges or anything like that. I have never disconnected the battery on any of my bikes. Just don’t turn the bike on and keep the key fob far away, and I’m sure you will be fine.
Did you disconnect the battery first?
I did not
Tedious...thanks DAD...
No problem man
49.95 at Moons for the plug and play harness for intergrated turn signal/brake light
Yeah that’s too much for me especially since I already have the correct harness. I’ll take the $10 wrap lol
Looks good about to do mine, looking for those plates to fill the hole after taking the blinkers off.
Just to clarify you didn’t use that rubber print that came off with the stock light right? I should be okay just installing it without the Oring and not have to worry about water damage?
*stock rubber O ring
Correct. I’ve taken mine through plenty of water. It comes with a foam backing against the leds. It should be fine. The o ring doesn’t fit the moons mc either.
Ridin Dad okay awesome I was trying to get the oring to fit but it wouldn’t so I stuck it on without it and I was just making sure that’s how you did it and that they didn’t make a Aftermarket oring that I was supposed to get or anything
@@SuperLalalada Nope, all good as is man! enjoy it!
Ridin Dad thanks again
What wire bundle would I need if I want to plug and play?
Guerilla cables sells it on their site. I can’t remember what it’s called. But it’s basically a brake wire with two turn signal wires with the male clip ends for the tail light bezel. Comes with a whole new rubber piece that sticks under the fender that replaces stock
Nope. Those are just to extend the turn signal wires themselves. Those are for the front ones at the handlebars. Not beetle long enough. This is the harness you’d need: guerrillacables.com/2018-2020-softail-rear-fender-harness/
Personally I prefer the stock Harley led light. Just wish they were brighter.
Only person I’ve ever heard say that lok
How did you fix the hyperflash issue on the Digital Guage. The signals flash normal at the Taillight but, when you look down at the Guage it is hyperflashing?
I’ve never had that issue man. Do you?
@@RidinDad Well if you didn't have the issue I guess that will be the tail light I will be purchasing to avoid any future problems. Thanks for the fast reply and quick clarification.
No problem man! And yeah, I'm assuming it will depend on your bike too though. I've never heard of someone having hyperflash or any other issues with any of the moons products but if you do their customer service is super fast & I'm sure they'll be able to guide you in the right direction. But I don't foresee any issues man!
@@Mark_Estelle if you run into that issue turn on the hazards for a bit to re sync the signals and it will get rid of any hyper flash. That’s what I did on my2020 street glide special
@@JEM805E Yeah I ended up getting the Custom Dynamics Probeam Intergrated Taillight That was DOT approved and leaving the Hazard lights on puts them in sync I can in fact say it does work.
😳clicked on links to purchase light but no pages found 😬
I just checked...yupp. Looks like they stopped offering the V1 or V2 tail lights due to the recent V3 model. I have a newer video of me installing the V3 and a link for that. That one works fine and the V3 is even better. Or you can use the moons page and search tail light and find it that way. Either way, up to you man. But I highly suggest watching my newer video lol
Damn thought it was plug and play
It is if you're willing to buy the extra wires that plug in under the seat and have quick connectors on the other ends instead of the stock wires which are just attached to the bullet turn signals
just take the entire fender and struts off Unplug the connectors
Yeah that’s another way to do it
So confusing
Why? What was confusing
Take off the stupid reflectors you do all that work and you have reflectors on the fender and the tag plate. Its not a Schwinn
Thank you so much for your concern. If you take about 5 seconds and actually check my channel instead of just blabbing away you’d see that all my reflectors have been removed for a while already