How to Make a Copper Wire Ring
Vložit
- čas přidán 17. 07. 2021
- In This video I Show How Easy You Can Make A Wire Ring From Copper Wire.
f you want to support me and my CZcams channel, here is my shop where you can buy my jewelry
My Shop
www.ebay.de/usr/silverrhand
My Instagram
silverhand_offi... - Věda a technologie
Thanks for the video. Please what's that little device you used in polishing the ring called?
dremel tool
Give me the time on which min ?
6:48
@@davidolowoyanwo1667 on 1:40 what tool is this? And is it at any hardware store? Thanks ahead of time and I Love watching your work! I'm getting ready to start doing these and the bracelet too! Advancement time!
@@davidolowoyanwo1667 that’s a dremel bro bro
I make many of these type of rings, you can get all the fire scale off with a homemade pickle solution (1 cup white vinegar + 1 tspn salt slowly heated) and it’ll make it much easier and less filling, looks great!
Cool video! As someone who makes jewelry with copper- my advice to those trying this would be: Wearing gloves, At the end, wipe it down with lemon/lime juice (I use a q tip). Then, sprinkle some baking soda on it, rub it around, and use a damp paper towel to wipe it off. This will clean the surface really well.
After you're sure it's dry, spray some lacquer on it. That will keep it looking beautiful and not corroding for a long time. 👍
Will it work on a Brass Hex Nut if I cut it and smooth it into a ring shape?
@@SabSnake I dont see why not!
Really Amazing, Enjoed this video, Thankyou very much 💐👌🇮🇳
Thank you for the video I will make this and give it to my mum
This is awesome, for some reason I want to start crafting with metals.
Waaaw bravo elle est magnifique ! Merci pour le partage
Your compass rose tattoo is beautiful ❤️
what brush and compound u use to shining the cooper?
Amazing guy ❤ so lovely
I want to watch your all vedios ❤❤ man can also do these types of things 😮 I am girl so I don't know about man that they can do these type of things
Complimenti 💯
Beautiful
Nice
What's the trick to keeping everything tightly twisted without soldering the whole thing? Did I not twist it far enough if I ended up with gaps?
Thanks you 😘
I like to twist The wire by attaching one end into a drill and the other end into a vice
I like turtles...
Thanks
Did you put copper in water on 2.33? Is it cold or warm water? Thank you!
Nice video. Gonna go make an open bezel like this
Thank you for your opinion. I will be glad if you rate my work on my channel. By the way, in one of the videos we made a sapphire ring out of a titanium tube.
Der Ring des Nibelungen.
Nice!
I’ve just done one, that’s a shame that I can’t send picture…
Thanks
Muy bacano
Moroco 👍👍👍👍👍👍👍🌹🌹🌹🌹🌹🌹🌹
You bave to add solder to the jiont, the ring may bend easily and will cuuase premature fialure. Also thay jiont doesnt look good, try soldering it and placing a think copper sheet over the soldered gap, it will remian copper colored and be much stronger
Nice 👍
Thank you for your opinion. I will be glad if you rate my work on my channel. By the way, in one of the videos, we made gold earrings out of ordinary coffee beans.
The tool you used at 1:22 is so cool! What is it called? Fantastic work! Thanks for sharing!
yes plz let us know
that is a old frenchkey or key tool
Awesome job 😄
Wow, really cool to see this transformation! What was attached to that drill tip to polish it? I ask because I am not a jeweler, wanting to buy so I can polish some Copper jewelry I have, attaching to a Dremel. Thanks!
Show under the Video linked all My Tools
C'est un genre d'amas de coton (des disque de tissu en coton superposé les uns aux autres pour leur donner du volume) ou une mousse. Ce n'est pas cette mousse qui polie mais c'est la pâte que l'on y mets.
D'accord, merci beaucoup pour l'information. Que Dieu te bénisse!
@@Silverhand.. where is the video
Ring cost kaya h
ich bin neu im jewelry und ich mochte das ausprobieren.
Can you fill the gaps with solder and sand it to look more solid?
Yes, you just need to make very sure you have only the tiniest gap between the two ends, and they are filed and clean and will seat flush. Then solder how you wish and finish.
It will turn green in a couple of days, won't it?
Heuuu,
Y a de l'idée mais faut pofiner tes techniques
(à mon avis:
*bague bien trop petite
*la découpe aurait du suivre le file en biseau pour ne pas être visible à la soudure
*soudure absente
*limer, d'accord, mais c'est un peu comme le ponçage les contraintes sont à effectuer en fonctions de l'appui de la pièce à limer. Autrement dit, ton coup de lime prendra sa direction en fonction de l'endroit où est maintenu ta pièce flexible)
Tu es drôlement bien équipé
Thanks
What exactly is that blue stuff that you use at the end. I take it it’s a type of polish? I’m in Canada so I’m trying to find this kind of stuff. Thank you
polishing paste (Silverline )
Nice work but.... I've found that if it's not a complete solid band then the open ends are prone to catch on things and can easily misshapen the band by pulling it open and causing a need for constant reshaping. Just my opinion.
What are the players called that you are stripping the wire with ? Please????
wire stripper thongs
At 2:33 after torch the wire what you put into? What liquid? Is it just water?
Water Citrus Acid 80-90 c°
I wish you would talk to explain each step😮
I want but
my english is so bad 😅
What are the 2 tools call that you use to create twisted wires?
I Use For The Stripping a Wire Stripper Tongs and For twisting a Old French Key Tool
@@Silverhand.. Thank you so much!
no weld ? hmmm damage ... but nice work !
😍🌷🇮🇶
What kind of electric wire do you use?
1.5 mm
دائما انا أعلق عليك انت ب تخرمز طريقة تكسر بها الزاج يامعلم خصك نتعلم كاينا آلة تغلق بها الساعة والراحة
Hi. What is the diameter of the wire you used?
1.5 mm
So that’s 18 gauge I think
@@Metoo1111 chances are its 16AWG
What happens if you don't heat treat the metal
Unlike iron/steel, copper is work hardened meaning it becomes harder when it was being hammered and what not. Heating copper will make it more soft and pliable
I was todays years old when I learned that I was supposed to use three strips and not two!
Es mi anillo
Hello what temperature did the metal get up to before quenching and how many time did you do it?😀
On appelle ça, recuire le métal.
La température n'est pas très importante pour ce faire. Il suffit de faire rougir le métal qui pars sur du orange pour le cuivre. Il te faudra plus de 1000°C pour faire fondre le cuivre autrement dit, c'est pas facile et pour ce faire, il faut du gaz et de l'oxygène. Ici, pour recuire, tu n'auras besoin que de gaz. Par cette action, le cuivre vas se restructurer mais surtout, se ramolir et devenir plus malléable
Is it dangerous if i do with the fire on the wrong copper or is it fine?
Please Tell me what is wrong Copper ?
Tarnish resistant stuff might be?
Not sure you can quench the copper
Moin Denis, magst Du mal die genaue Bezeichnung deiner Poliermaschine nennen? Das Gerät das Du ab Min 6:17 nutzt... Danke und liebe Grüße
Woher kennst du mein Namen 😄
Das ist eine Hängebohrmaschine gibt es in verschiedenen Watt zahlen und mit verschiedenen Aufnahmen .
Wie gehst du mit den Verfärbungen auf der Haut um, bekommt dein Kupferschmuck eine nachträgliche Oberflächenbehandlung?
Die Kupferarbeiten sind nur zum üben da um silber nicht zu verschwenden da es günstig ist und sich ähnlich verhält man kann nachträglich natürlich galvanisch behandeln und beschichten der ganze Modeschmuck besteht aus Kupfer oder wird mit Kupfer und dann mit anderen Metallen beschichtet
Aber zu meiner Frage wie bist du auf meine Namen gekommen den steht nirgends 😄???
@@Silverhand..doch, klar... in der Video Beschreibung gibts den link zum shop... da stehst du dann mit persönlichen Infos
What is the purpose of heating up the copper?
The heat is used to “anneal” the material, causing it to soften up. The characteristics of cooper are unique in that they are generally soft but can become hardened by bending or “working” the piece. Once it gets stiff, it can be resoftened by Annealing, you can do this as many times as you want
How many millimeters of wire did you use?
1.5mm strong
@@Silverhand..Thank you very much, I'm going to make my wedding rings in this style and I really appreciate your help, hugs from Brazil 🇧🇷
what is the gauge of the copper wire you used?
1.5mm
Glad i looked through the comments first. My exact question lol. Love this video! And I'm sure your english is fine! Use the captions with it if you need. Truly appreciate you taking your time to show us your skills. 🙏🏼🙏🏼🫶🏻🫶🏻
Speak up Dude.
Why was it left unglued? It is unsightly and uncomfortable.
😂😂😂
А спаять хотя бы не судьба? Халтура какая-то.