Hey man would consider doing a prepurchase inspection video for a NPR? Could be on one in your shop or taking the camera along when you buy one. It would be useful to a lot of people to see an inspection from someone who knows these trucks inside out
Do you have a video on how to bleed the brake system on an npr? I just purchased a 2012 npr hd with a gas motor. The pedal was spongy so I replaced the master cylinder. After bleeding the system the pedal was good for a bit but went back to the same symptoms. I am thinking air in the abs module?
Just heat the tone ring and it goes right on once it bottoms out all you do is grab something to fit in the tone ring give it a spin it should spin freely once it does let it cool it will stay in place
Hello, I'm new to ur channel but really like the tech details ect. I have a 2009 GMC w4500 and can't find anything on getting the air bleed on the abs system. Any tips would be greatly appreciated. Thanks
Great video. Helpful information as I'll be rebuilding my hubs tomorrow
The bottom 22mm caliper bolt is a pain to torque. I had to cut a socket down to fit. I’m curious what you used. Thanks for making this video.
Thanks for all your hard work! Can you do a video of common oil leaks and fixes for Diesel NPR's? Thanks!
Thanks for all your vids on the NPR! It would be great to see one on changing the oil pressure sensor; my new (used) truck is throwing a P0521 code
Hey man would consider doing a prepurchase inspection video for a NPR? Could be on one in your shop or taking the camera along when you buy one. It would be useful to a lot of people to see an inspection from someone who knows these trucks inside out
Great job my brother
the bearings after they are changed every how often you have to grease them
Do you have a video on how to bleed the brake system on an npr? I just purchased a 2012 npr hd with a gas motor. The pedal was spongy so I replaced the master cylinder. After bleeding the system the pedal was good for a bit but went back to the same symptoms. I am thinking
air in the abs module?
At my job we have the tone wheel puller and installer but sometimes they still get warped when removing.
Would those be the same torque specs for a 2005-2006 NPR?
Just heat the tone ring and it goes right on once it bottoms out all you do is grab something to fit in the tone ring give it a spin it should spin freely once it does let it cool it will stay in place
Hello, I'm new to ur channel but really like the tech details ect. I have a 2009 GMC w4500 and can't find anything on getting the air bleed on the abs system. Any tips would be greatly appreciated. Thanks
Any way you can show how to replace a driver side mirror on an NPRHD?
Could you help me? My 2011 isuzu truck npr has a flashing amber regen... light that won't go away.
my truck is a 2006 isuzu npr 5.2L diesel but i just want the truck to drive good i'm in miami florida where can i go to get that done
i want ti change the fuel leveling sensor and the brake booster is flashing and making a beeping sound i need these things done as soon as possible
Rear pinion seal npr hd?
Are you still in business and where is it? Thanks
How much does a typical front brake job cost on a npr?
I seen them from 1.5-2.5k on one pair either front or back parts and labor
Can you show us a radiator flush?
Bro why didnt you show how to take the abs ring off