How To Safety Wire Bolts, Grips and Drill Bolt Heads
Vložit
- čas přidán 4. 01. 2019
- How to Safety Wire Bolts, Grips and Drill Hardware.
Also known as Lock Wire or Speed Wire.
Check out one of our vehicle builds: • Drift Car Build FWD Co...
Papadakis Racing gear: papadakisracing.com/
Red small safety wire pliers: amzn.to/2C1Apjp
Speedway drill Jig: amzn.to/2LTkSGH
Diagonal drill fixture: amzn.to/2LS4Ixm
1/16" Drill bit used: www.mcmaster.com/#28765a11
Follow me: / stephpapadakis
****
ABOUT PAPADAKIS RACING:
The Papadakis Racing team began drifting in 2004 and is the most winning team in Formula Drift history, earning the 2015 title with driver Fredric Aasbo, as well as backto back championship titles with driver Tanner Foust in 2007 and 2008. The Rockstar Energy Drink / Nexen Tire Toyota Corolla Hatchback is the latest competition build from the Hawthorne, California, based team.
Team owner Stephan Papadakis is a legend of sport compact racing who began building his reputation in the 1990s with the first front-wheel drive, tube-chassis drag car in the U.S. The team earned multiple records and championships in the discipline, turning in elapsed times and trap speeds previously thought unattainable in front-drive drag cars. Papadakis' successes in front-wheel drive were matched by his efforts in rear-wheel drive when he campaigned a Honda Civic that became just the fifth car to join the NHRA's Sport Compact 200 MPH club. - Auta a dopravní prostředky
Once someone said to me: there are three things a man could do forever without getting bored, watching water flow, admiring the fire burning and watching someone else work XD
damn that is so true
And Confucius say “man who go to bed with itchy butt wake up with stinky finger”
easy way to keep cut-offs from flying everywhere: Fill the "void" where the cutters are with rtv or some soft silicone, let it cure and cut it in half with a razorblade. Your pliers now hold onto anything you cut
Smart.
That’s pretty genius
...Or buy aviation style pliers... They make those with plastic pieces to prevent the clippings from flying everywhere.
I love how this dude tells you dont be stupid, in the most informative manner. I would have cut that wire short and spend 15 minutes fishing it out.
I just safety wired my grandma so she doesn't fall over anymore. Thanks off-brand Mr. Clean!
so you safety wired the pelvis to the femur?
Omg that was great.
Lmaoooo
That works? I've got a rat terrier that I'm gonna wire to the porch
😭😭😂😂
Wait a second.. aren't you the same guy who was running 9's back in the very early 2000's with a yellow EK hatch??!
Jordan Price Yes sir! We have been building and racing cars now for 25 years :)
That's what I'm saying. Hes been around doin big things for a long time.
Yes! Yes he is. Been kickin ass for ages.
Great video. Long time Honda guy and motorcycle road racer. Awesome info for everyone to benefit from. Thanks again
Think the hatch came later. He drove a coupe first for AEM.
It's so weird cuz I heard on a CZcams video with that Hatch that he died or something like that.. Its crazy! Nice to see you still around kicking ass and taking names!
I used to weld flaps and seals for afterburners, and got a tour of the Middletown CT. Pratt & Whitney plant during my certification courses. I saw some impressive wire skills. Those guys are artists.
I wire my grips on my dirt bike, and feel like a caveman compared to some of this artistry.
This was awesome! This is the first time I've ever seen this safety wire stuff. Very useful techniques for keeping bolts and nuts locked in place and not able to back out at all...much better than locktite! Thank you! 🤙🏽
Great video! I’m an army chinook mechanic we do it differently, and we have to do it all by hand with needle nose and diagonal cutters along with duck bill pliers.
I learned using safety wire in my agusta westland internship, i love it, they teach me all the little tricks for doing it perfect.
Was a engine room turbine mechanic in the US Navy. Gsm rate, General Electric Lm2500 specifically as well as the Allison gen-sets. My first Chief woulda nut puched me on that tie work and stainless sucks in general, use Monel. Oh I have a 20 year old twist tie just like you had (milbar)..it did last me 20 years too!. All that said this guy is going to huge trouble to show people something they may not know how to do.. KUDOS to you PAPADAKIS, HATERS GONNA HATE. Great video and perfectly fine for the application IMHO.
More videos like this please :D I find them relaxing for some reason and its great to learn!
You, along with Abom79 and Tim Lipton, are a terrific teacher. Thank you.
Used that technique to hold the exhaust to the header in a vehicle with stripped and missing flange bolts
A year later and still going strong
Thanks for sharing
Love your videos! This one reminds me of my good ol' days as an Aircraft Mechanic.
Great job on a simple, yet critical mechanical task.
I have locking grips on both my mountainbike and my dirt bike, they are a gift from heaven cause they are really easy to change when they are worn out, really easy to install and never slips due to the m4 screw holding them in place!
I learn something new every time i watch one of your videos. So cool how we can all learn from each other half a world away! Cheers steph and the team at papadakis racing! 🤘🍺
I use the same wire and Amazon pliers for my track bike. Great video I learned something!! I will do it like how you did where it wants to tighten the bolt if it comes loose.
More videos please! They are full of great info. Im constantly checking for new uploads :)
I have been following Papadakis since 2010, im from Sweden, have learned a ton of stuff.
Always nice to learn new things. Ive seen those pliers before but never knew their purpose.
Thank you to youtube for pushing this to me! I've followed you for a very long time. SWEET!
This is one of the most informative and easy to follow Car channels.
About to go safety wire my turbo manifold outlet to turbo exhaust housing, lol. Always wondered how to run these safety wires, but never really bothered looking. Thanks paps 🙌
i have never heard of this ! i have clearly been living under a fricking rock ..what a technique !
Ever had an acquaintance that you felt embarrassed asking their name because you had know them a while....these pliers are that acquaintance to me.
Suddenly everybody in this comment section is an aviation mechanic..
No, they just watch AgentJayZ.
Ricardo, everybody? No not everyone, but you will quickly come to find out that we can be very strict about it. It is an easy way to identify who in the trade wants to be professional, and who just doesn't care about the quality of their work. Safety wiring is very easy to discern a true professional by the small attention to details, and it is also very easy to see where or if a person messed up.
Actually I used to be one 😀 I wouldn’t sign off locking like those bolts, but guess it’s fine for a car
Well when we’re looking at safety wire on CZcams....yeah... an aircraft mechanic will pop up. Btw, that’s an example of a safety that would get cut by the inspector ☺️☺️
Yeah, I'm a TF33 mechanic at Tinker Air Force Base and I really cringed to see the way he finished that pigtail. But hey I guess it works but no inspector in propulsion would ever let that fly (unintentional pun).
This is good information to me because I am training to be an aircraft mechanic and I have been struggling to safety wire but i am going to get some from a company and practice.
Dude you're channel is one of the most informative channels out there. amazing
Thanks for helping me secure my new job 💪🏽
Advice from an F-15E Crew Chief (general mechanic), who often safety wires hardware: make sure to tug on the strand of safety wire going through the second fastener directly in line with the hole in said fastener. This helps eliminate slack In Your twists and further secures those fasteners. Great video!
Yeh I was thinking it was a little loose, i guess it doesn't matter as much when you aren't flying through the air like a bullet.
And advice on where to purchase the hardware? I've looked but can't find good bolts online.
@@Andrew-jd1dt MSC or Grainger would be a good start.
@@rhubarbpie2027 Thank you!
Kind of ironic that the guy who’s looking up an instructional video on how to safety wire is giving pointers 🤣
For those of you watch and under 35 years old...you are watch a legend in the racing world humble enough to take time to teach you something. So thumbs ☝ up.
So thats what me gramps's weird ass pliers are for. Been in my toolbox for 20 years. He was a shuttle mech for nasa.
Love this kind of content. Wish you'd shown how the safety wire tool works!
Today I learned something realy interesting and practical. Thanks!
Use to work with Chris Rado at World Racing in Torrance, your teaching methods are great, wish I had a mentor like you back in the day! Would love to see your shop one day.
hey man i'm from Brazil, and i'm aircraft mechanic in the Brazilian Air Force, so i did'nt know the tools to make a role inthe bolts thanks to show for everybody, but in the and of yours wire safe i observed that you need to put the end of the wire inside the bolt's role to keep our hands safe from possibles cuts, congratulations i'm learnig so much in this chanel.
Top shelf demo sir. Top shelf.
Great video! On the motorcycle grips, I like to make the twist start on the bottom of the grip. (where no hand touches) I also fold the end piece in the other direction. The way you placed it your glove could potentially catch the end and twist the throttle open. Also, you can actually stab the end piece of the wire into the grip rubber to help eliminate that from happening.
Thanks for dropping some knowledge on us.. Never thought of this before.
Very neat explanation, demonstrations and video done nicely too. Thank you!
quickly becoming my fav channel
now that is a CLEAN shop! great videos
Simply Amazing! Thanks.
I'm not an A&P mechanic, but I've done maintenance on my airplane including install a new feather lite starter on my Lycoming engine. This included calculating a new CG because of the weight difference. I did this under the supervision of an A&P mechanic, but he was required to do the safety wire. As your video illustrates, there is a definite method to your madness and a good reason someone who knows the proper way should be the one to do it where it really counts. Great video, thanks!
I would advise you to not use this video as a how to example to safety wire. I counted five things he did wrong when wiring those two bolts. I would have cut that wire and told him to do it again.
Thanks for the awesome vid! Always good to know these little trade tricks.
This video was excellent. Please continue to make more videos!
man, I remembered putting safety wires on Andrew Brilliant's Land Speed Mitsubishi Eclipse back in the day. those bolts on the turbo and downpipe kept on getting loose, so I safety wired those suckers and problem solved! lol
Great video! I’ve been super impressed with the videos you’re putting out lately! I have been a fan of yours for quite a while, I got to see you race many times back in the mid 90s at battle of the import out in Palmdale, Used to have so much fun at those events, and even more fun at the Motel 6 at night time after the races LOL! I still remember when the new crews were out there after those big ol parties, it was so Rad to be there When you first dipped into the 9’s! Thanks again and keep up the great work !!!
Subbed and liked!
I work on aircraft and boy do we used safety wire everywhere. Just a tip for you. Once you have the path of the loose wire going to the second bolt. Clamp the tip of your pliers where the hole for the next bolt is. Then give a slight and quick yank of the wire and hold the tension, then twist your pliers. This will pull the slack of of the wire. Another note, as you twist the wire, it will shrink in length and you always want to compensate so you don't have to re-twist on wire you've already twisted. Good video for beginners, but the wire between the two bolts you want really tight as well. For this application, it is fine, though.
Thanks man! That was very informative. You have a very good voice for being a youtuber: sounds proffesional!
I don't know why, but you just come across really well. I loved that bolt hole centering tool. Excellent! Subbed too, props from the UK 🇬🇧! 👍
Man, I didn't even know you had a channel. Good stuff! I remembered your name from my dad & his buds. They were into NHRA stuff. I know you from FD. You've been a true pioneer in racing for years.
love your work, man
New favorite channel
A&P mechanic, great video. Only thing I would add is if you have the room always twist your wire inline with the safety wire hole. It gets your wire as tight as possible on the starting bolt head.
Great tutorial
We also use wiring methods, but back in the day that was thicker wire. One tip though: if you're putting safety wire on your handgrips, make sure you tighten the wrap, putting tension on it until you finished twisting them. Just to make sure they're tight, and don't overtwist or you will end up snapping the wire! Don't cut too short as well, as the twisted wire itself can unravel and loosen.
I was a mechanic in the USAF. We safety wired everything. Useful skill to know. If you want to get it tighter on the ends, you can hold the wire taught with the pliers and do a big clockwise circle. Nothing wrong with what you're doing, that's just how I was trained.
Michael Melton commonly
called a ‘depot twist’. We got our asses kicked when caught doing them during trade training here in Oz.......
I can see that. You can definitely over do it, breaking the wire or bust out the hole.
Thanks for the video brother!
the videos u guys put out are really, really good dude
It works awesome on turbo and exhaust blankets too.
Nice Video Mate, Heaps of good information & Technique.
Good point recovering dropped pieces, I heard about a guy that lost a bolt on a simple valve cover job and he just replaced the bolt. But the lost bolt had found its way behind the crank pulley and lodged into the oil pump and btoje the housing, motor had to be pulled and rebuild...
In aviation, we called these dropped pieces FOD - Foreign Object Damage (or Foreign Object Destruction). A big part of our job is preventing FOD.
Awesome video, I knew it would be worth a watch. I have been avoiding safety wiring my Wilwood rotors but I think this has inspired me to pick up the tools and do it.
Use proper fasteners and loctite.
@@ldnwholesale8552 Already do that, but I have heard so many stories of them working their way loose after track days because of the heat cycling that I'm paranoid. The most common recommendation I seem to get on them is doing the regular items and wire lock them if possible. It will just be a ton of work to drill and wire them all.
I work on Eaton Fuller Transmision and its a must saftywiring the bolts on the shifter cover
Very good video! I didn't understand the freedom units. But I'm sure it'll convert into mm for us in England. Subscribed!
Love all videos man ., i was kine of a racer as well., money kick me out :( ., (( motorcycle)) didnt had a shop like u do ., but my home garage was sufficient.
I definetly need this for my W203 200cdi
oh wow I can finally keep my headers tight on my old Chevy
This. Was. Great.
Dude is kind enough to share what he does. CZcams puts him on blast. Right or wrong it seems to work.
always wondered why i seen this on race cars and turbos but never understood. thanks for the informations. now exuse me while i go and do this on every bolt on my chassis :D
Should do the twist on the tail at the outlet hole. Also, the span between the bolts wasn't quite tight enough. I used to work on Sea Hawks in the Navy. What most people don't realize is holding torque is the secondary function of safety wire. The primary function is if hardware breaks, the pieces stay relatively in place and don't get caught in linkages.
Please more videos on tools and techniques you use. I want to learn more.
You can just hear the experience coming through...excellent.
sample is fine for cars, but definitely reject on aircraft. Great shop. Great team, Superb projects. Subscribed.
I always use spray paint for my moto grips! Just a little spray in the grip before install and it sticks so well you have to take the grips off with a razor blade lol
i liked the gambiarra in the end
:):)
New shop looks nice! The second shop looks a little familiar too haha!
Man I wish I had the knowledge you have wow
I LOVE IT !!!!!!!!!!!!!!!!!!!!!!!!!
this is awesome!!!
*laughs in aircraft mechanic*
*high end army/navy tools*
Chair Forks (Air Force) uses Blue Point safety wire pliers. They are nice 👌
Army aviation here. What are saftey wire pliers?! Haha
Yeh yeh you are superior to all others, ok.
F16 / F15 specs nerd. I use snap-on twisty boys.
@@rhubarbpie2027 those are just rebranded Milbar. Milbar is the top end of safety wire pliers
.
I would love to work for pappadakis, he's an automotive genius
La vie de rêve !
Thank-you!
Wish list: automatic bolt driller
favorite video related to safety wire is this one lol@
Jet Tech: Lockwire
My first deployment a couple guys safetied my shirt into a knot so tight and about the size of softball with a half roll of wire. Took me hours to cut it open.
This is such a good idea God knows how long it would’ve taken to figure that one out myself lol
do this onboard my Submarine almost daily. also if you leave someone not stowed for sea i will go out of my way to lock wire it in the most inconvenient place possible. lock wiring is quite fun 👍🏽
I LOVE how fussy you are!!!
Thanks!
A good tip for getting the tail that little bit more taught especially in areas of little access is to actually motion the wirelock plier in a circular motion as you also rotate the pliers 90 without using the puller at the end, alternatively grip the wire tail as close to the bolt head as possible and rotate from there.
Can you explain this a little more? How does that make it more taught? Does it just "walk" the wire tighter through the hole?
@@9rjharper Do a CZcams search for: Agent Jay Z lockwire. He has a excellent mini series of lockwiring. Easier to watch how it is done than it is to explain it.
Greetings from Greece!
Can you and would you safety wire flywheel bolts to keep them from backing out? or would the wire throw off the balance of the flywheel assembly?
Awesome!
I have some decent blue point pliers, unless I have really long gaps between points, I usually will use some modified vise grips, duck bills, and needle nose. On short gaps I think it's actually a bit faster and I have more control, if I have to span the grand canyon though, I will use my actual safety wore pliers.
Really cool video. When do i potentially want to safety wire anything? I have never seen provisions for using safety wire in anything aftermarket for a car.
We use safetywire alot in the aviation business. The finishing off of the safetywire in the video is not really OK in an aviation perspective but i guess it is not that crucial when used in a car! :)
How what was wrong?
Blake Nic consult ac 43.13 1b’s section on aircraft safety wiring. It’s probably the best resource for it. That and JetTech’s video series on it on CZcams