SECRETS AND MANUFACTURING PLANS OF THE LIBERTY ENGINE 2.0. English version
Vložit
- čas přidán 1. 06. 2023
- SECRETS AND MANUFACTURING PLANS OF THE LIBERTY ENGINE 2.0. English version
LIBERTY ENGINE 2.0 NON-CUT PERFORMANCE TEST.
PLANS AND SECRETS OF THE LIBERTY ENGINE 2.0
The big energy companies have managed to ban our video, but we will continue to fight them and we will repost this video on CZcams as many times as necessary. Together we will make this world a better place.
Many subscribers have requested the plans with measurements of the "Liberty Engine". You have also asked us for the electrical diagram. Others ask us to say what is the exact composition of the special alloy with which we have made the rotor. And others have asked that we do more testing and take measurements of voltage, frequency and power. Well here you have the most anticipated video of the century. We hope you like it...
Please note that we cannot sell our prototypes, but we must warn you that we have detected several fraudulent companies that try to scam people by saying that they sell copies of our "Liberty Engine", but those copies do not work. BE VERY CAREFUL NOT TO BE SCAMED
- Spanish version of the video:
• Video
__________________
TURN ON SUBTITLES. THEY ARE TRANSLATED INTO SEVERAL LANGUAGES
INDEX:
00:00:00 Intro
00:33:00 Questions
00:38:00 FAQ 1: Can you provide us with the electrical diagram of the "Liberty Engine"?
00:52:00 FAQ 2: What are the technical specifications and power consumption of the "Liberty Engine"?
01:34:00 FAQ 3: Can you demonstrate a high power load test simultaneously?
19:06:00 FAQ 4: What are the transformer specifications?
19:35:00 FAQ 5: Can you show the mechanical blueprints of the "Liberty Engine?
20:01:00 FAQ 6: Can it generate 110 volts?
20:26:00 FAQ 7: What are the rotor dimensions?
20:51:00 FAQ 8: What are the magnet dimensions?
20:58:00 FAQ 9: What is the exact alloy of the rotor?
21:33:00 FAQ 10: How can we purchase a prototype?
22:28:00 FAQ 11: If they are patented. Don't they expire after 20 years?
23:24:00 Thanks
__________________
If you want to have access to see the complete video without cuts of this performance test of the "Liberty Engine", you must become a Member of the Channel. Only then can you enjoy this exclusive content:
- Spanish version: • PRUEBA DE RENDIMIENTO ...
- English version: • LIBERTY ENGINE 2.0 UNC...
- To become a member of the channel, click on the following link:
💥 / @hiddentechnology_
We want to thank all the members of our channel, but especially the Elite members:
- seduccion
- Diyson
- harpinKeith
THANK YOU!
__________________
Purchase links on "Amazon":
- Air heater 3000w 220v: amzn.to/3OHJbKb
- Energy Meters: amzn.to/3IG1njL
- Motor starter: amzn.to/3OExynf
- Driver Leds: amzn.to/435QSOK
- Digital multimeter: amzn.to/43nrW4Y
_________________
Warning: The use, copying, manipulation or transmission of this video or part of it without the consent of the author is strictly prohibited. This video is protected by copyright.
HOW WE RECORD OUR VIDEOS
- Sony RX10 IV: amzn.to/3VDUXFg
- iPhone 14 Pro Max: amzn.to/3CipqSi
- K&F Concept Tripod: amzn.to/3YSvMBP
- COMAN tripod: amzn.to/45u6uNs
- Display Batteries: amzn.to/3IgeoRt
- Screen for Sony FEELWORLD F5 Pro V2 camera: shorturl.at/aQSZ9
- Articulated arm: amzn.to/3opJSxc
- HDMI adapter for iPhone: amzn.to/45vCvVl
- Bresser pantograph F001483: amzn.to/3MUW16t
Join us!
💥 Telegram Private Channel: t.me/hiddenTechnology
💥 Facebook Channel: / hiddentechnologyyt
Business:
dakrazychannel@gmail.com
Electric generator
brushless generator
free energy
infinite energy - Věda a technologie
Based on my observation, the fundamental principles of the presented current generating machine, are based on my country's fellow man, Nikola Tesla invention, "Method of Obtaining Direct From Alternating Current" Patent No. 413.353 Patented October 22, 1889. In that patent, Nikola Tesla stated: " I am enabled to produce a self-exciting alternating dynamo ... Thank you for sharing this video with the revelation of its principles, and methodology of making it, it is inspirational and motivating, and pointing out how great the Nikola Tesla futuristic mind was for generations to share free!
Hi
Can you help me to make this on whatsapp.
This sort of technology has been around and suppressed for so long! My hat is off to Liberty Engine to bring it into the light of the public now for low cost energy to the world so we may finally start directing our funds into other area's of technology instead of energy! where it should have been for so long! Thank You Liberty Engine Technology! I believe you have done this to where the world will finally receive it and accept it!
Greetings to everyone from Azerbaijan. I have made a generator from an asynchronous motor. Now I have an asynchronous motor. It is possible to make a generator with a condenser. I made an asynchronous motor. It is magnetic inside and infinite. That's why I believe in you. Greetings from Azerbaijan. If anyone does not believe, he can see that magnets produce electricity by turning any dc motor. This means that everyone is familiar with physics. People already wrote the laws of physics, man, he is right, when it comes to patents, the oil companies confiscated them. If such inventions come out, no one will use oil. It can be written in a way that is against the laws of physics, but that does not mean it cannot be done. Just because you failed does not mean that no one can succeed. Hidden Technology. I am proud of you. Good luck to you.❤
You are amazing people, thank you very much for this valuable information. Well done on your efforts. We are fortunate to have you.
Thank u for showing the world a different way to live may God protect you and your love ones with fire water wind and earth God blessed
Great video
Tolong perhatikan dengan saksama dimenit 15:03.. Dia melepaskan sumber listrik, sehingga membuat suara motor listrik tersebut berubah (kehilangan sumber energi)..
Dimenit 15:05 dia memasukan kembali sumber listrik😢.
Ini hanya sebuah trik😂😂😂
Material Conductivity (Siemens/m)
Aluminum (37,667,620.)
Copper (59,772,863.)
Silver (62,893,081.)
Iron (10,298,661.)
Copper and Silver have a conductivity slightly less than twice that of aluminum, allowing eddy currents to be established with correspondingly greater magnitude, resulting in an increased of torque.
Stainless Steel has a conductivity approximately 40 times smaller than aluminum, and thus cannot carry any eddy current as well as aluminum, copper, and silver. Iron is there for an example but, I still don’t know the mixed to ratio.
Update: 7/5/23
Aluminum
Copper
Beryllium
Bismuth
Cu,Be and Bi will be 1/16th (6%) of the total amount of the Rotor. So, 82% Au, 6%Cu, 6%Be, 6%Bi will give us with 100% in total. I also know the model of the motor he's using and its not the specs he put in the video😉. I believe he's using 3 different patents to create this Art Work and without a doubt, this machine works.
Update by AI
If cost is not an issue, and the silver content needs to be more than 75%, the composition of the alloy for the perpetual electricity generator rotor could be adjusted as follows:
- Silver: 85%-95%
- Aluminum: 2.5%-10%
- Copper: 1%-4%
- Zinc: 0.5%-2%
- Nickel: 0.5%-2%
- Magnesium: 0%-1%
- Titanium: 0%-1%
- Beryllium: 0%-0.5%
This composition would have an even higher silver content, which would provide even greater electrical conductivity than the previous composition. However, it's important to note that increasing the silver content beyond a certain point can also reduce the mechanical strength of the alloy, so this should also be taken into consideration.
Again, the exact composition will depend on the specific properties and performance required for the perpetual electricity generator rotor, but this provides a general idea of how the composition can be adjusted to increase the silver content.
But 7600gr 1037,3cm^2
82% Aluminium have more cm^2?
I think;
62% Silver,
20% Alu,
6%Kupfer,
6%Beryllium,
6%Wismut
The Magnets attaking the Iron with 18kg x4 =72kg.
The Rotor musst the Iron the Magnet attaking reduzieren?
@@mikehaertschLenz's Law. I went with these metals because of a patent by Donald Lee Smith. This Liberty2.0 runs on radiant energy and it also need to be coated with Shellac to prevent energy lost through eddy current. It also follows another guy name Robert Adam from New Zealand. he's patent are lock by the military and will be confiscated by law if built. This device can also be improved by using Thane Heins Transformers. Re-cap, Smith pulls radiant energy from aether, Adam can pull 800% of radiant energy and Thane can multiply that with his transformers.
@@joelhurel6970 it’s not regular energy. It’s radiant energy, with radiant energy you can push 53amp at 12150watts on a 10gauge wire. Think of it like speakers, it frequency that is passing through those wires and not AC electricity.
@@McFlysGaming Hi, can you elaborate more on the patents you've mentioned? Where are the patents of Donald Lee Smith and Robert Adam? Where are you getting this information from? Thank you
@@tess007 change of plans I’ve found the original creator, Jean-Claude Cordier. There is two videos of him on you tube
Engineer here...this is legit. Thank you for coming to my Ted talk.
bro wtf are you for real an engineer?
Everyone can believe in free energy. It's for free. And so sweet. Have a nice day!
Please repeat this demonstration with all of the equipment mounted on a glass table in a clean environment. Please demonstrate clearly that there is no possibility of an external power source!
I do not believe you could demonstrate it running without external power source 👍
Eu aceito sua explicação, e compreendo sobre os meios de segurança e segrado. Mesmo assim, parabéns pelos projetos, e esperamos um dia ve-los funcionando em nossas residências, em empresas e até ajudando no desenvolvimento energético mundial.
Good job..This is a laudable project. Can't wait to see it on display
It's recycling the energy.
The rotor that he pulled has an output bigger than the other one.
The one he built is around 4 times bigger. Maybe 4times the output. The weight of the aluminum alloy has an effect on the speed and momentum as a whole.
It was Nicola Tesla who built the very first magnet generator.
I don't seem to be able to reach other ppl directly, when the CZcams channel has served its purpose...
Imagine if you had a couple of these in an electric car, there wouldn't be a need for batteries, you just have a starter to start the 2 devices and some capacitors. No need to create pollution from battery production. No need to build powerplants to support the grid for charging. This is what the ev world needs.
If 12000W divided by 228 = 52.63A AC, there are some obvious questions.
1. 52.63A would require 4GA wire to handle the current, you are not using 4GA wire.
2. The outlet strips you are using to connect the heaters are designed for 15A each, not 25A.
3000watts is enough for house hold. but 12000W? its litterally overkill.
@@CarinoGamingStudio Hmmm... I'm using 46,000 watts in our house in Vancouver, Canada so I need more power! I will actually need a few MEGAWATTS but the company I consult to won't let me use one of their 10 Megawatt generators! SOme of us have BIG servers at home!
V
@@StarGateSG7 i think your circuit breaker is higher than average family house.
@@CarinoGamingStudio Yup! We got 3-phase power at 480 Volts at 400 amps (or 192 Kilowatts). It's a tad excessive but nice to have. That said, even that is sometime NOT ENOUGH!
From the first time I started watching your tech, you always hide a vital part that could make it work. When I tried to produce it, it becomes garbage. If you want to help us get your tech for free as you claimed, please release the full video with your secrets to enable us benefit from your technology.
thank you for save our time and money.🙏
Thank You for save my time and money love from asia
If you're talking like this you're discourage others who want to try, if you're a competent electrical engineer you'll understand it's possible, there're lots of it on CZcams in deferent forms though they might not as perfect as this remember he said it took him seven good months to make it so everyone wants ready made food to consume, sooner or later you'll see we're all in the field searching
110v?
He a lier dont believe him a save money , in first video he made woth car alternator didint work it i made and it sgarbage
¡Saludos desde Ciudad Acarigua, Estado Portuguesa, Venezuela!
🫵😎😉🇻🇪😉😎🫵
Paylaşımlarınız için teşekkürler yeni videolarınızı bekliyor olacağım.
Over 40 years ago I designed and constructed a prototype machine similar to this. I was able to provide over 10 kw output using only 7.8 watts input once full stabilization was achieved. The incorporation of low density phlogiston as a laminar coolant along with phase reactive condensing fingulators was used to accelerate the necessary krindle -boost to the lagging field density. In addition, we used 12 monotonic charge encabulators to lengthen the toroidal force vectors which required continuous orthogonal axial tensor adjustment.
What about endurance? Have you ran any endurance tests on this generator continuously for at least 24 hours to see how it performs and if there are any thermal issues with it running for long periods of time. How many hours do you think this generator can run for before failure powering a 12KW load like that? I would imagine the mean time before failure (MTBF) would be dependent on the motor specifications MTBF. If that is the case then 10,000 hours or more of continuous operation may be possible. In terms of energy output that would be 120,000 KWh if it ran for 10,000 hours continually powering a constant 12KW load. Very impressive demonstration.
The cable supposedly supplying 12kw is at best 1.5mm copper which can hold 15 amps tops before it overheats, so i dont believe you are pulling 50-60 Amps /12KW@220V ac, not happening, it would burn up
it is not possible to multiply such power with such a small motor power at 220v because it has a weak torque even if it is at 380v, I have a pmg generator at home, the strongest magnets that are available in the latest types, which are made with the least possible resistance and the best power, the generator is 28kg, 20000w, but what does it have to make 2.5kw 380v to tighten it and for the next with every such performance resistance heat is generated
This unit produce 6kW per pair of coil. See the diagram.
Fantastic product. I have three questions.
1- Can I buy, and the price. ?
2- How is the output frequency and quality in armonics in relation of power consumption ?
3- how can I get one of 30 KVA ?
Thanks for Your works.
I love to see it! 😎 Great product and answers as well!
Try looking at 5.47. when he states NO POWER does the four gang extension have a spark at the switch,that is not possible without power.
Du travail propre et minusieu.. Très professionnel!!!!!
merci beaucoup!!!🤗👍
Great idea! But this DOES NOT illustrate a load of the potential of 20KW. I see four heater fans at 3KW being run. What I DO NOT EVER SEE is, for instance, a normal kitchen (cooker, washing machine, toaster, microwave, perhaps a clothes-drier, including lighting, AS A MINIMUM, being around 60Amps) being driven by one of these devices. Until I do see it I am going to say right here and now that this device, based on the cabling you have used, COULD NOT develop 20KW! 20KW represents at 230 Volts a current potential maximum of nearly 87 Amps - the cabling alone could not handle 87+Amps! It would fry!! The idea is great, BUT until I see REAL WORLD application of this device that can produce the stated load, this device is an exaggeration! I have no doubt that with mods to the cabling, the socket terminals (which are woefully inadequate), load and current protection, this device MIGHT produce sufficient to drive the kitchen devices as mentioned. There is a glaring lack of current data - Voltage and phase is all very well, but anyone SERIOUS would want to see the Current drawn by the electric heater fans to prove the 12 KW as expressed.
Sei cieco? a messo 4 lettori di assorbimento di carico uno per ogni riscaldatore e tutti assorbivano all'incirca 3 kilowatt l'uno. per la sezione dei cavi usati non reggerebbe ma l'esperimento e durato poco tempo non hanno avuto il tempo di scaldarsi o fondersi
Let me understand....you cannot produce that engine because his tecnology is protected but you can make a video explaining step by step how to assemble it?
👍👍👍👍👍 Chłopaki rozwalcie złodziej w wielkich koncernach Elektrycznych . ich Kłamstwa dobiegają końca. Rozpowszechnicie to urządzenie na cały świat powodzenia trzymam za waz kciuki . rozpocznie masową produkcie .!!
I know you guys are trying to make a miracle, can you make the exact parameters and dimensions and detail the materials needed to make the product? I'm trying to do the same thing as you guys and run on 220v power
Why doesnt the RPM dip when you turned the heaters on? How do you prevent runaway?
tres apprécié merci.
Nice project perfectly good.
ليس من المستحيل نجاح المشروع بالافكارالناجحه والعقول النيره ولاكن المستحيل إن إرضاء الناس غايه لاتدرك او
مستحيله استمرياصديقي بارك الله فيك ونفع بك
How warm will this get if used?
can i use teflon for the rotor ?
Ini benar..hukum fisika dibuat untuk memonopoli manusia, yg ujung2 nya adalah uang..dengan perhitungan yg tepat sangat memungkinkan ini bisa terjadi..karena tanah saja bisa menyimpan listrik jika terkena air apalagi air hujan, memang di luar nalar..ttpi akan paham jika lebih detil memahami apa yg di jelaskan dalam AlQuran
If there are patents, approved patents are public. Please could you provide the patent codes and references to let people read them?
1. Can you show a video where you measure the voltage on two MOT coils connected in parallel and what is that voltage,
2. On the diagram, you have drawn two coils for powering the motor which are connected in parallel and power the asynchronous induction motor, show the current that the motor draws when it is running.
3. You have drawn that the two coils for supplying the consumer are also connected in parallel.
4. Show us a voltmeter that shows the correct voltage on the MOT coils.
5. Show us with AC current clamps what current flows to the motor and what is the maximum current that flows through the two parallel windings to the 12kW consumers which are the heaters.
6. At a voltage of 220V AC, the current for 12kW is about 55 Amps, so it is not clear to me how you get a current of 55 Amps from two parallel coils that use magnetic induction.
I hope you can explain my questions.
I'd like to know the temperature of the transformer while you have the 13kW load!?
Very interesting but the only problem I see is that there is no ramp up on the engine when there is a load put on it. Turning on the the heaters or plugging in any device should cause the engine to ramp up to meet the extra power demand. It would make no sense for the system to remain at the same RPM no matter how many devices are plugged in since it would cause a runaway power increase that would burn everything out. Would you guys like to explain why the device only stays at one RPM?
Simple, it avoids Lenz's effect
Penso che il rotore e il motore sono solo un mezzo per prendere l'energia dall'ambiente di cui siamo pieni, Tesla lo ha fatto! con una antenna e un dispositivo prendeva energia dall'ambiente e faceva andare la sua macchina insieme al nipote se non ricordo male.
❤❤❤❤❤
Hidden technology thanks for sharing The information needs to get out there I wish I had the tools and the knowledge 2 order to build one
I'm confused. Where exactly does the pixie dust go to make it work. Also, my supply is running low, any idea where Tinkerbell is residing these days?
The 1-phase motor can be changed with a frequency converter. If I let it run at 30Hz, it will spin slower. If you spin it by hand, it is impossible to hit 50Hz. Explain how you achieve 50Hz. There is nothing in the scheme that would maintain 50Hz.
motor have 4 poles and generator have 4 poles... which means at around 1500rpm you will have 50Hz...but you are right something dont feel right here ???
@@IVANBELJIN the generator has 4 poles, where two coils are connected in series. But the motor is connected to only one of this series of coils. This means that the demand cannot be evenly distributed over 4 coils. Another socket is connected to a kind of series of coils. there, if you don't connect anything, the consumption is 0, and the first series of coils is the consumption of the entire motor. The fact that the motor has 4 poles does not mean that it has 4 coils. It definitely doesn't have 4 coils. It's the wrong comparison. It has several coils in the stator connected in series. From the number of coils in the stator, the RPM data at 50Hz is then developed. The number of coils determines the RPM at 50 Hz. That's why it's a synchronous motor. The more Hz you let it spin, the faster it spins.
Thank you universe
Fabtastic !!!!!!!!!!!!!
CAN YOU PROVIDE THE FIRST ROTOR WEIGHT AND DIMENSIONS?
Great idea that how much is cost?please
Hey chat! Listen to me. If this was true it would mean free energy for the whole world. No more nuclear power plants, no more solar or wind power, no more gas, coal or hydro power would be needed. Do you think the inventor of such a break trough would be making youtube videos about it?
IF there was "No Eddie currents or magnetic breaking" Why does it then snap to a pole of a magnet? This indicates that there is drag - but maybe a reduced amount. The secret IS obviously behind the composition of that alloy the rotor is made of.
Why not use a three phase motor?
Can the generated energy be used to run a three-phase motor?
What is the ratio of aluminum to silver in the turntable and what type of permanent magnet is used?
Good luck man.
Totally like this! As the man said, the majic comes from the rotor. Silver and aluminum alloy among other materials. My God. What is in that rotor? Very interesting.
It's made from Fairy dust and Unicorn farts.
Exelent machine very very good boy
Thanks ad so much.
Hallo super Arbeit! Für alle Kritiker ...auf der Genfer Erfindermesse wurden Magnetmotoren vor vielen Jahren schon vorgestellt! Schlaft weiter :D
The "Argallium Alpha" Alloy is Simply Electroplated AlGa.... Silver plated, Aluminum-Gallium Alloy.... AlGa is brittle and weak, can be greatly strengthened through electroplating with silver.
Understanding that you cannot sell the product, do you offer the plans for sale?
Can it power a 300 watts Refrigerator?
Of course
@@HiddenTechnology_ Во сколько вы оцените генератор если будете продавать?
it works
ILUZJA 😊👍
Thanks for the videos as I've watched them multiple times. Can you assist with the alloy rotor of how much aluminum : Silver?
Robert Murray Smith does a really great take down of the liberty engine.
Basically: its not an energy creator only a converter.
Well yeah, that goes for basically everything! It's just we have abundant energy sources the powers that ought not be don't want us to use.
My suggestion is to put in a small one man boat, out in the water and power it using an electric boat motor. This would go a long way to believing that this is real.
superb guy....put a few of those in the shop...taxes paid.....i love it...
👍..... Good for everything
The motor is emptied then a smaller motor is put inside with space for a battery, induction could also work for electricity. Thermodynamics are called laws of physics for a reason they are absolute.
Inside the "Membership", there you will find the answers to your questions. Those people made this video is a group of intellectuals and engineers that know how this principle works.
@@simplethings2410 I will never pay for science, especially papers that aren't even proper science. Fact is the claim of making energy from nothing is impossible no matter how advanced tech ever gets. Shame on you for such pathetic attempts at deception.
Lord Kelvin said, nothing can fly that is heavier than air.. That was the absolute science for dogmatic people of that time... You are the same today 😂
@derlon858 that's sub atomic scales, quantum physics are interesting, but most likely irrelevant.
@Gregi76 it isn't dogmatic, it is laws of physics with decades of scientific knowledge backing it with peer reviewing.
Nice ✨🌟💫👍
Hello, the video editing is going very well, I see
He took advantage of the physics phenomena "momentum" and "magnetism".
i think it's deeper than that but also simple . The generator seems to be a closed enviorement...meaning it sucks up unobserved atoms, the atoms then gets converted into electricy , trgouh momentum and magnetism then goes to it's observator (the deice at the other end ) and the observer gives the atomsit's properties
if you're legit is there anyway for you to give us the technical data so the people can try to make it themself..?!?
that would be apriciated
Mille BRAVO 👏👏👏
Micro wave coils are not easily gotten. Any data on the winding gauge/ohm specs? can solid steel be used for the iron coil core? - most transformers use stamped sheets as a laminate lock to hold the the coils securely with a shellack varnish. are yours epoxied in? What is the HP rating on the single phase motor? is it doubled for a 110v (USA) set up at the same wattage? Anything 3D printed versions - carbon fiber core? - I want or need the 10,000 watt + continuous to run a portable wire feed welder. I have a 20+ hp gas motor to currently run my generator head that runs the welder. I'd even like a 6000 watt setup for an RV hunting shack... Solar n batteries kinda suck there ... Got some N52's that are rated at 86 lbs pull. Small engine recoils n cups not a problem.. So maybe a 3 phase motor set up to be a trunk carried EV charger ? WOW! Lathe n mill not a problem.. Could build one and Video the results to ya bytlan is my user at yahoo.. If it really works this is outstanding..
Bitte ein Langzeit (Endlos) Belastungstest in einem Livestream auf Twitch ! Grüße aus Germany
ja man das wäre nice, glaubst du das ding funktioniert ?
Hi! I'm so much impressed with your free energy module.
Remain blessed as you dig even deeper to come out with the best for humanity.
I have a question:- you say you have given special treatment to the alluminium alloy. What is that treatment? Can you explain the other materials or heat that you treated the aluminum alloy? Many thanks in advance for the response.
How can 550watt motor make 12000 watts ?
Physics as we know it say this can't work.But are there somethings we don't know about physics? I would imagine there are.
If a scientific principle can be attributed to it, but just cinematics and intense anxiety inducing musical score that builds up to sell it.
energy is in the field, it's infinite
JAJAJA Te pasaste Petronilo!!! 20.000 Watts... no te creo ni siquiera 2 Watts...
I think you can also welding, wow, nice job 😁
good job ! Did you already made the 3 phase version ?
Ну да конечно, ровно 50 герц и 228В, блин ну народ не тупите вы....Человек подключает 12 киловатт нагрузку а генератор даже обороты не снизил....
how you feed your own (home) electricity from ?
magnetic field of the earth
I don’t know what you ppl are thinking or doing wrong but it is 100% legit! Made a smaller scale model a bit different but same concept and it works great.Time,engineering and faith in yourself.if your tech savvy and are fluent in scientific field you’d understand and be able to build one.
I believe you, hopefully one day i can make a small prototype. Can you upload a video showing your small scale model.
Здравия. Пожалуйста, скиньте схему последовательность цепи катушек . Благо Дарю.
Would love to have one as we live in a caravan and powerd sites cost a fortune and the power bill too as will make traveling easy too thanks for showing us how it is done
@hiddentechnology would a copper, aluminum and silver rotor would work? (More copper beceause well i can't afford the silver)
Does the density of the metal affect the eddy current and brake?
Does the conductivity of silver makes a difference?
And does the non-magnetism of the silver affect the field of the magnets?
Copper, nickel, zinc, aluminum. Silver is a code in the case. Research above combo
Rightttt. “Free” energy. Literally at 5:46 when he flips the power switch, it lights up, and then the second one flashes when he turns it on 💀💀💀
No, I think that was a reflection from the top of the switch
Why don't you show the output generated by the "alternator" alone to prove that it generates enough to power the motor?
Why are you not making this generator and marketing it to the public?
I for one would purchase.
Tesla has a patent
Anyone involved in the sales and marketing of products such as this out in the public will be wiped out by the world elites.
@@raymondriesgo4974 Nicola Tesla's patents have LOOOONG run out and Tesla the car company has NO SUCH PATENT. They have battery patents which are technically based upon Panasonic's technology! No patents are on this motor technology.
V
@@jaythay4716 if this really worked like he claim he would become a Boeing whistle blower..
Thank you and I have a very important question. What is the continuous period that can be run while it is loaded, and does the temperature of the engine and the generating coils remain stable or normal, or does it heat up after certain hours and must be cooled or its frame is loosened or it works twenty-four hours continuously normally? Please answer and a thousand thanks
Hello, the working frequency Hz of the power generator
50
Is this machine for Sale?
How can I purchase one?
How to be a sponsor for channel?
Need one
GOLD that’s all i gotta say figure it out
What type of transformers u used in it?
Is the motor adjusted or modified? from Thailand Thank.
freedooommmmmm....!!!!thanks in the name of whole world...!!!
At 5.47 the four gang plug, that doesn't have power as stated lights up, when switched that's not possible.
Fantastico