This Metal Bar Is The Key For UNLIMITED ENERGY
Vložit
- čas přidán 20. 05. 2024
- This Metal Bar Is The Key For UNLIMITED ENERGY
ArgAlium Alpha is a special metal composed mainly of silver and aluminum. This metal has unique properties because it is the only material with which unlimited electrical energy can be obtained, since it completely eliminates Foucault currents and magnetic braking. This special alloy is still in the experimental phase, therefore it cannot be found on the market. For this reason we cannot give its exact composition, but we can give some clues that you can see in this video.
Thanks for watching!!!
- Magnetic Pole Identifier: amzn.to/45c0R58
- Video fabrication Liberty Engine 3.0: • Amazing 10Kw Free Ener...
__________________
INDEX:
0:00 Introduction
1:40 What material is the cylinder made of?
2:03 Cylinder dimensions
3:02 Characteristics of the secret alloy
3:45 Magnetic pole testing
4:24 Acknowledgements
__________________
Become a member to enjoy many advantages!
💥 / @hiddentechnology_
We would like to thank all our channel members, but especially the Elite members:
- harpinKeith
- Salman
THANK YOU!
Join us!
💥 Telegram Private Channel: t.me/hiddenTechnology
💥 Facebook Channel: / hiddentechnologyyt
Business:
dakrazychannel@gmail.com
_________________
Warning: The use, copying, manipulation or transmission of this video or any part of it without the author's consent is strictly prohibited. This video is protected by copyright.
HOW WE RECORD OUR VIDEOS
- Sony RX10 IV: amzn.to/3VDUXFg
- GoPro HERO11: amzn.to/3NvGGbS
- Insta360 One RS Twin Edition: amzn.to/3CQDz9k
- iPhone 14 Pro Max: amzn.to/3CipqSi
- SMALLRIG 72" aluminum tripod: amzn.to/3NrUOmi
- COMAN Tripod: amzn.to/3FYCuOg
- Display batteries: amzn.to/3IgeoRt
- Sony FEELWORLD F5 Pro V2 camera screen: shorturl.at/aQSZ9
- Articulated arm: amzn.to/3opJSxc
- HDMI adapter for iPhone: amzn.to/45vCvVl
- Bresser F001483 pantograph: amzn.to/3MUW16t
liberty engine,free energy generator,free energy,free energy generator,free energy generator magnet,free energy from microwave transformer,electric generator,magnet free energy,magnet free energy generator,free energy with magnets,homemade free energy generator,how to make free energy generator,microwave transformer generator,magnets,amazing tech,tech,multi,new technology,free,free energy generator,free energy generator,10kw generator,infinite magnetic energy,ArgAlium Alpha Translated with www.DeepL.com/Translator (free version) - Věda a technologie
Everyone overlooks one fact. Any electrical resonant circuit does NOT automatically vibrate at 50 or 60 Hertz. I have messed with many many many coils and resonant circuits. The typical resonances for natural resonance is MUCH higher in frequency.
So, where is the 50Hz coming from? Outside influence has to be present to control any device that runs at 50hz
yeah this is all lies
Makes sense.
This concept contradicts all physical and chemical principles. Then there is the nonsense with the large stator of the three-phase motor and the small rotor made of the "secret" material, where the magnetic fields would have to overcome a huge distance to have an effect. And the half transformer on the right and left completes the whole thing. Even my turtle 🐢 started crying when she saw this nonsense. I hope she feels better tomorrow. By the way, ArgAlum is made of scrap and aluminum.
Really you need to see silver aluminium alloys. You should research before critical posting.
This material nreaks the eules.
Has anyone noticed that Hiden Technologies does not reply to the many comments posted in this community?
I wounder why? Could it be they are ashamed of what they are doing by deceiving the public just to make a buck?
Anyone and everyone in this community should pay close attention to any replies posted by Hiden Technologies & Liberty Engine. If they are for real they would respond to all post that are asking about where to find the material to build their own motor.
We cannot respond to all the comments that are written to us, that is why we only respond to channel members. We are not ashamed of anything because we do not deceive anyone. We cannot say the exact composition of the rotor because it would be too dangerous for us
@@HiddenTechnology_ Seems to me that you're in more danger if you're the only one who knows the secret than if a lot of people knew it. Plus the PTB don't care if you got free energy, they only get involved if you try to sell it.
@@HiddenTechnology_ I've duplicated every part down to the same make and model. Here's the proof that;

@@edbaton936 Work or dont Work ?
What material is being used in the cylinder, I understand all the materials, I assembled everything and did no work ,I spent money for nothing, I wish they were more responsible in putting out a video that people can't make
Wo kann man diese legierung kaufen? Ist das ganze Material mit Silber versetzt oder nur als dünne Beschichtung auf Aluminium?
I just published a short video regarding a Laminated Disk Rotor that I designed and built in an effort get something going on #2 engine. I don' know if it will work but I don't know is anyone is ever going to give out the formula for Argilium Alpha alloy either. I'm way behind building because of life's setbacks so until I catch up, hopefully others can take a look at this possible method and experiment with it if they think it has merit.Thank you and Good Luck!
Can the dimensions be reduced such that the cylinder is thinner and shorter, uses less material? How does this affect performance? How susceptible to inconsistencies in alloy composition is it, what are maximum/minimum permissible densities of the alloy? 3-8g/cm3? What's the relationship between output amperage and size/shape/alloy? WIth the connectors being roughly 14-20AWG, what's the maximum amperage the LE can put out in continuous state? What does it look like with a thermal camera taking video?
The dimensions or density of the rotor composition cannot be reduced.
@@HiddenTechnology_ why?
Делайте прибор на продажу с гарантией возврата товара и денег в случае если это не работает.
Надоел спам о "вечных двигателях"
bro, where did you buy the argalium, or did you buy it at an online shop
Hello, how are you? A question, please: How can I get the same cylinder made of silver and aluminum, please?
Thank you so much for your works.
I would like to do the experiment that this is real.....
Would it be possible to purchase the cylinder ?
Thanks.
220v motor can work?
hello I'm from the Dominican Republic. I would like to know the composition of the cylinder. How much aluminum and silver does the manufacturing take? Can you give us the information please. I want to do it and then show it to you already done.
hola soy de republica dominicana. me gustaria saber la composicion del cilindro. que cantidad de aliminio y plata lleva la fabricacion. pueden darnos la informacion por favor. quiero hacerlo y luego mostrarselo a ustedes ya hecho
Год назад делал по его схеме с автомобильным генератором. Да он при вращения выдаёт 25 вольт, но не 220 вольт. И самозапита нет, как бы вы не старались. Пустая трата времени и денег. Не ведитесь на это.
Necesita un transformador de 25v a 220v, pero no pierdas el tiempo pues no tendría los KW suficientes más que para encender unas bombillas led
Can you please tell me how can i buy it.
I follow this. channel for a few years and now I finally understand that no one on CZcams or the internet in general will ever be able to give the solution for the production of free energy, even if they wanted to, they wouldn't be able to.
Technical knowledge, especially the construction details of objects for the production of free energy must not be disclosed, whatever the cost. That's how it is now, but it will change.
this show is totally crap !!! promisising something but can not be justified, the movie maker of this show is politician,.. they are just fooling us,.. thinking that we are stupid and slave only,..
Hi... May you can tell where we can buy the cylinder
Is it true that the cylinder is made purely of silver and aluminum alloy? Are there any other substances included?
Cuando tengais algo que podamos replicar para ser autonomos, nos avisais, mientras tanto, enhorabuena por vuestro trabajo y por la cantidad de visualizaciones. Si funciona o no, no me importa mientras no me sirva a mí.
Hello where i can buy this "arganium" aolso HH+?
i hate this movie,
nothing show the actual intention, but only fooling people around,
what is exactly your mission here, telling us free energy exist ?? and at the end you will said " we can not tell the main thing of parts because of Blaaa Blaa,...
How do I get it or how do I make it?
Where can I get that cylinder?
My question is how old is the virtual magnet?
Sobre o cilindro de alumínio. Ele não conduz energia magnética. Poderia explicar melhor a função dele? Pelo que eu percebi ele server apenas para prender as duas extremidades. Não é isso?
For a 30 Kw engine, how to size the bar?
My guess so far by the info i got the ca. composition is maybe : 60% silver - 30% aluminium - 5% copper - 5% bismuth. The sylinder as I understand have to got the right electrical-conductive & diamagnetic properties. Thank you so much so far for your bold mind and exelent work.. in what I think is "free energy" by the consept by "electromagnetic resonance" in quantium physics. 👍
my friend, have you produced the material? if so answer me please
¿Funcionaria si se usa solo la aleacion de plata y aluminio? hice unos calculos y sabiendo que la densidad de la plata es 10.49g/cm³ y del aluminio es de 2.7g/cm³, resolviendo el sistema de ecuaciones de 2x2 me sales 736.06g de plata y 147.94g de aluminio, es decir casi una relacion de 5 a 1, ¿me podrian decir si voy por buen camino?
the gallium appears to be REQUIRED
Obtuve exactamente estos resultados. Si esos son los dos únicos materiales, es correcto.
ou tu trouve ca le cylindre
Quelle taille avec les cercles en ferrite ?
Peut-on mettre du néodyme ?
Le générateur silencieux peut-il faire du 380v ?
Comment faire pour se procurer cette fameuse barre???? Vous ne le dite pas et c'est pourtant le plus important ! Comment faire pour l'acheter ??? Introuvable sur internet alors??
Bonjour, est til possible d'acheter la pièce ?
how to on and off?
principle of operation?
Can I order this type of engine somewhere?
Dónde puedo comprar el eje de plata con aluminio, xfa gracias
save yourself the money.
Me dices q me ahorre el dinero, pero dime cómo o con q otro material puedo replicar esto , ya que en mi país no cuento con ese tipo de material
Where I can the alloy core cylinder?
Desde luego si funciona con una aleacion de Plata y Aluminio, funcionaria tambien con una barra de aluminio
Is it true that the cylinder is made purely of silver and aluminum alloy? Are there any other substances included?
I would appreciate it if you could tell me what other substances are included.
The third component comes from a horses ass😎
The shaft materiall is ArgAlium Alpha it is a non ferrous alloy composed mainly of silver and aluminum. 8% Ag 92% Al. It has unique a unique affect on magnetic waves.
How do you know? Have you made this?
is there a valid alternative to argalium?
Thank you for sharing
With the diamensions and the given weight of the bar, its possible to calculate the weight of the bar in a fairly standard composition alloy and estimate the ratio of silver added, it is also possible to cast this mix in bar form and machine to size
even if a different ratio and grades of both alloys and silver alloys were incorrectly ratioed it should still produce a result if what they are telling us is correct then only a slight variation in the mix would still give results! And can be modified, with a higher or lower mix of both
It is a very complicated alloy because this material has also been subjected to special treatments.
Как можна заказать ротор?
how can you order such material? who should be contacted for registration
Has anyone in the group managed to replicate this experiment with this engine? Why of the shaft metal alloy secret? Is he just another charlatan on the Internet?
Totally
Waste of time…
what would be the cost of such a piece of alloy?
Скажете пожалуйста ваши первый проект генератора сколько часов может работать как она не ногреваеится
I do not believe that the metal bar plays a role in the production of energy in its system. I watched a video, here is the name for those who want to watch it on CZcams. (10KW Free Power Generator With Electric Panel Parts 100% Real) as you can see in the video, no bar was used however, there is energy production. I think the bar is used to distract us.
But someone did it Witherspoon a copper bar and it's not working
By weighing the rod and calculting it's volume, you can calculate each element mixture by density, that should give you a ratio of silver and aluminum!?
50% Aluminium 50% Silver
That's some terrible machining of such an important part. How do you deal with the uneven electron flow from the skin of the cylinder bwing so uneven?. Not to mention the loss of efficiency due to ionization of the high points of the surface due to the microscopically large pits created by the lathe tool????? I would think this should have been polished to a mirror surface to eliminate those issues, please explain!
You can also use a broom handle, it works just as well.
@@sagmalehrlich only if it's the amalgamation of ebony mixed with balsa, to get the correct mass distribution across the entire spectrum of electron flow characteristics:)
Wouldn't this work like dropping a magnet inside a copper pipe? Eddy currents?
In order for this to work one needs opposite of an eddy current...
@@seanauth Yes, pipe on the inside of the magnet. Eddy currents induced into the bar.
Din cate stiu eu doar oscilatii le de putere si sens ale unui camp magnatic, induc curenti electrici in conductori ce intersecteaza respectivul camp magnetic oscilant.
كلامك غير صحيح. يوجد تحت الطاوله سخانة كهرو مغناطيسي يمده بي الطاقه المغناطيسيه يصبح مشحون مثل. قانون تسلا ويكذب على المشاهد
The "Argallium Alpha" Alloy is Simply Electroplated AlGa.... Silver plated, Aluminum-Gallium Alloy.... AlGa is brittle and weak, can be greatly strengthened through electroplating with silver.
The pores from the rotor in the previous video are results of silica casting the AlGa before electroplating. Machined parts would not be porous.
Bravo
the question is does it work?
Nach einigen Recherchen habe ich heraus gefunden, dass eine Legierung aus 12,6 % AG, 77, 3% AL und 10,1% CU eine Dichte von 7,09 g/m³ hat. Möglicherweise sind noch weitere Legierungsbestandteile in geringen Mengen enthalten. Eine solche Zusammensetzung ist nicht käuflich erhältlich. Der Name Argalium ist verwirrend, da hier der Silbergehalt um 90 % ist und somit die Dichte deutlich höher bei 8 - 9 g/cm³ liegt.
Super Recherche. Hast du auch herausgefunden , daß das Material überhaupt keine Rolle spielt und daß man auch einen Plastikstock verwenden könnte um den gleichen Effekt zu erzielen (nämlich gar keinen) ? 😉
Malheureusement ton mélange est faux...
Pour calculer la densité totale d'un mélange, il faut additionner les masses volumiques de chaque composant, en fonction de leur proportion dans le mélange.
Dans notre cas, nous avons :
Argent : 12,6 %
Aluminium : 77,3 %
Cuivre : 10,1 %
Les masses volumiques des trois métaux sont les suivantes :
Argent : 10,5 g/cm³
Aluminium : 2,7 g/cm³
Cuivre : 8,96 g/cm³
La densité totale du mélange est donc de :
densité = (12,6 * 10,5 + 77,3 * 2,7 + 10,1 * 8,96) / 100
densité = 2,92 g/cm³
Donc, la densité totale du mélange est de 2,92 g/cm³.
Veuillez noter que cette valeur est approximative, car les masses volumiques des métaux sont des valeurs moyennes.
Voici la démarche étape par étape pour calculer la densité totale d'un mélange :
Calculer la masse volumique de chaque composant du mélange.
Multipliez la masse volumique de chaque composant par sa proportion dans le mélange.
Additionnez les masses volumiques de chaque composant pour obtenir la densité totale du mélange.
Exemple :
Mélange :
Argent : 12,6 %
Aluminium : 77,3 %
Cuivre : 10,1 %
Masses volumiques :
Argent : 10,5 g/cm³
Aluminium : 2,7 g/cm³
Cuivre : 8,96 g/cm³
Densité totale :
densité = (12,6 * 10,5 + 77,3 * 2,7 + 10,1 * 8,96) / 100
densité = 2,92 g/cm³
Réponse : 2,92 g/cm³
Всем доброго времени суток! хочу знать где,как и каким образом я могу приобрести этот цилиндр сплава серебра и алюминия.
I asked the same question can i purchase this rod
нигде и никак если ты не лох ...
Говорят на Луне есть готовые валы.....или метал.
@@phillipdutoit1901 poland ! rdzeń zrobiony jest z Nierdzewki! a ta prądnica nigdy nie będzie działać 100% FEEK!!!!!!!!!!!!!!!!!!!!!!!!! Nius!!!!
poland ! Stal nierdzewna : AISI 304 / 1.4301
Hi. how are you doing?
there is something I need to ask please
Крепёжные стойки должны быть из платины, а сердечник металлического цилиндра из осмия, что бы болты упирались в этот сердечник и тогда точно будет работать.
нет коллега вы ошибаетесь стойки из коллоидного пропердолкоболтила, а сердечник и эфириума его полно в черных дырах, и вообще это элементарное устройство, читайте мои труды " мой гений и С2н5он" 125 том 345 стр.,
A quel tarif ou et quand se le procurer ?
why dont this electric motor be tested on a EV car for unlimited electrical millage ?
The dollar profit from 194k views with more views can be used for commercial ivestment or to purchase fuel to energize an engine to generate electrical power etc. and can be sold to consumers. Whatever profit gained will be the free energy. Congratulations. Wishing more views (fee energy) for you.
it`s work, but for better result use whitte gold`s bars
Finally, Thanks
Thanks!!
thanks!
Thank you very very much
Love you 💝
Exact composition ! Q.E.G. it's also from this! It can be alloyed in noble gas. Please ! Please ! Please !
Vrea sa cumpar si eu un ax din acel aliaj , stie cineva cine il face ? ( Aliaj Ag =67.43 % si Al = 32.57 %
Ich habe es gebaut, exakt das gleiche, geht nicht, habe auch alles versucht geht nicht, es könnte gehen wenn die beiden Mikrowellen teile in der Sekunde immer wieder für 60 Hz also 60 mal die Sekunde umgeschaltet werden, so dass ein mall Rechs und links, dabei sollte die Seiten der Stromzufuhr auch mit umgeschaltet werden, so dass es einmal S und wieder N ist.
Dann wird der Motor denken, es dreht sich ein Magnet.
Dann könnte es womöglich gehen, aber nur womöglich, denn diese Schaltung braucht auch Strom, ob das ausreicht? , wenn jemand ide hat bitte melden
Hallo
Ich baue gerade das Teil habe alles bis auf die Welle es gibt nirgends das argalium alpha Rundmaterial was haben sie verwendet ?
mfg
Haben Sie Solinger gemacht.und viefile Potential silber und aluminyum.danke
Das einzige was bei diesem Video rumkommt ist viel Geld beim Kanalbesitzer, der die Videos monetarisiert und durch seine Geheimnisstuerei extrem viele Views produziert, damit sehr viel Werbung von Google ausspielt und somit richtig viel Kohle verdient.
@@antonmayer1402Richtig gesagt, die Menschen wollen an Märchen glauben und investieren Zeit und Geld in dieses Spielzeug. Man kann es nicht einmal als Spielzeug bezeichnen, es ist einfach nutzloser Schrott.
Der Zylinder muss aus Metall Class gemacht : wie machen in Kalifornien in der Berkli . Das Material mit 1600 Grad schnell in Flusses Asot mit großen schwindencheit KALT machen und in Kupfer Zylinder lassen.
Potrai eliminare le correnti parassite, ma in assoluto la legge di Lenz, la quale ti impone che per legge di trasformazione, l’energia motrice sia sempre superiore al generatore. Per tal motivo non esiste rendimento ad energia libera; solo trasformazione di qualsiasi energia “spontanea”. Saluti…
Ok felicitări ❤❤❤❤❤
I AM IN !!!! I want to buy the plans, I want to contract for product development. I am willing to invest my $$$$ ( and I do have some $$$$ for major investing )
Looks similar to the setup of old fashioned ruby lasers. The magnets on the ends act as reflectors of a standing magnetic wave. The length of the center bar plus the tx cores is a function of the desired wavelength at the desired frequency. As the magnetic field vibrates, so too does the current in the coils and wires. The rod could be any material that is conductive but not ferric (can't create electric field when mag field moves. Would stronger end mags amp up the electric output or is that more self limiting from the winding number and guage?
Hello
Hello I have try many were but don't work
Please help me out please
@@MustaphahBinabdulmalik you'll have to ask the person who posted it the video. I haven't attempted the math to find the correct length of the core rod, but, assuming a resonating magnetic wave travels at the speed of light and the resonant frequency of the field is 120 Hz, then the ends of the magnetic field need to be some factor of the wavelength of the field. There's a formula that accounts for the speed of light, amplitude, and wavelength. Calculate the wavelength, then design the rod and transformer core to be a fraction of the wavelength. That fraction is important because it puts the node or easily reflected part of the wave at the coils and located within the core rod. It also puts the field maximum in the collector winding, which is then transformed into electricity.
@HiddenTechnology_ the bar is able to conduct electricity ?
was für eine frage, es besteht aus einen Metall und strom fliest in jeden Metal durch oder habe ich die welt nicht verstanden ?
They say that alloy has completely no eddy currents, so my question is pertinent.
El material de la barra es conductor de la electricidad.
And there are no Eddy currents, right ?@@HiddenTechnology_
Is there magnesium in the alloy composition?
Это аморфные материалы и стали которые называются Металлическое Стекло. Состав Кобальт 83,7%, КРЕМНИЙ 9,4%, ЖЕЛЕЗО 3,7%, Хром 3.2 %.. Как плавить в медный цилиндр с сильным охлаждением изучите сами и есть Ачинский металлургический завод который выпускает более 100 наименования продукции из Металлического Стекла, в том числе и для энергетики и т.д.❤
А если трубчатый он будет? Не пройдет? Гистерезис ведь тот-же будет. Или тут частицы, да, именно частицы какую-то роль играют? Сколько же сплава надо для стержня по сравнению с трубкой?! А поля ведь в чем-то поверхностны. Или не так?
900 грамм без малого. Вес декларируется здесь же в публикациях испанцев, как и состав. Испанцы сделали работающие устройства именно под этот "ключ". А про трубчатость тоже возникал вопрос. Скорее всего частицам нужно тело для формирования их мощного пучка в магнитном, пока неизвестном нам поле. Тогда может быть и выделяется энергия, которую отдаст контур статорных обмоток с резонансом на 50-60 герцах. Включение устройства - толчек незначительным источником... В 60-годы А.Н. Милях, Член корр АН, Академик, директор одного из НИИ, очень много занимался невзаимными устройствами. Вот кто бы сейчас разобрался хоть немного. Спор был большой у двух "китов" : Тетельбаума и Миляха по невзаимникам. (невзаимники - направление исследования, разные обмотки на своеобразных сердечниках, положениями которых можно было управлять напряжениями и токами без механического переключения.) У испанцев генератор на "частицах" отдает чуть не 55 ампер.А это, извините, мощность. Вот что нужно в электромобилях, а не взрывчатка - литий, не зарядные станции. Есть - нету. Ведь станции сами по себе потребители от ТЭЦ. От гидро, от АЭС. Выигрыш электромобилями видимость т.к. потребление нефтепродуктов только увеличится. А буфер из лития может быть запаской. Выглядит это вроде того, что "Бобик сам себе надевает ошейник и регуруемую длину цепочки". Уверен, что где-то и кто-то у нас, как было с простешими, казалось бы, летающими платформами нашего гениального энтомолога - самоучки В. Гребенникова. Пришли к нему "люди" и попросили для спецпользования, слежения и т.д. - отдать им его платформу, величиной с этюдник художника. Он задал вопрос: -За что вы меня пятнадцатилетнего в концлагерь врагом народа отправили? А вскоре, накануне смерти, В. Гребенников порубил и сжег свое устройство. Остались несколько фотографий, его рисунки и заметки,его книга "Мой мир". Эксперименты данные своеобразный путь познания. Там он рассматривал парадокс майского жука, который по чесу летать не должен, а летает. Гребенников и свое устройство сделал на открытом им принципе преодоления гравитации. Отступления здесь - кое какой фактаж, что нас окружает и чем мы пользуемся, магниты, о которых мало что знаем. Шумерские лепные изделия - свидетельства полетов людей. В русских сказках - ведьма в ступе летает. Прошу извинить, что именно так изложил свои размышления. Буду рад контактам: VK Евгений Лебедев.
Вы, случайно, не из Отдела Сбыта Ачинского металлургического завода? 🤣🤣🤣
Пока вы думаете в Калифорнии в Беркли предприимчивые уже наплавили пруты диаметром 36 мм более 5 тонн по 1 метру Металлического Стекла. Причём они добились при охлаждением ЖИДКИМ АЗОТОМ глубину в 10 мм не магнитится поверхностный слой с высокой проницаемостью вихревого поперечно крутящего переменного магнитного поля, а остальные 16 мм являются магнитными имеющие спины которые и направляют перпендикулярно переменный магнитный поток продольно то налево то направо увеличивая ток в катушках в 6 раз.
Does anyone know who can make this alloy of composition Ag and Al - Alloy Ag = 67.43% and Al = 32.57%?
és akkor mi van ? ? ? NEM MOND EZ SEMMIT ! ! ! SZÁZAD % OKRA BETŰRT ÜRES MOINDANIVALÓIVAL EGYÜTT ELMEHETSZ A SUNYI PICSÁBA
Good good ok thank info
Wiecie ci ? Czytam te posty i nie ma zadnych konkretnych informacji. Wygląda na to że nikt nie chce podać faktycznych danych konstrukcyjnych . Albo jest darmowa i budujemy urzadzenie albo płatna jak do dzisiaj .Jak chcesz aby była darmowa to podaj dane konstrukcyjne i sprawdzimy czy to oszustwo czy faktycznie mamy darmowa energię. Na dzisiaj uwazam że to oszustwo. Pozdrawiam wszystkich zainteresowanych ta technologią.
Bzdura. Niemagnetyczny rdzeń miałby pobudzić prąd w zwojnicach??
Would love to support your channel and work by being able to purchase the stator cylinder. By nit open sourcing your research for independent replication, you are setting yourselves up to be bought out and having this device disappear and shelved. We need this device yesterday! Licensing fees obtained having this device mass manufactured will provide a great income. But selling to the highest bidder will keep humanity from benefiting from this device!
Tisztelt Liberty-3! Sok kommentet olvasva, sok embert lóvá tett, mert a videó alapján sokan megépítették, a gépet, de "nem működi!!!" Sok pénzt kidobtak, az ablakon. A video alapján, a kisgyerek is meg tudja építeni, DE Nem működik. Turpisság van a dologban, amit a kamera nem mutat, mindig más látószögből mutatja a kamera, a lényeget. Az izzó fénye túl egyenletes, mintha hálózatból jönne, az áram. Gondolom, üzlet az egész videó. Ha megrendelnénk, a berendezést, mennyibe kerülne, a "MŰKŐDŐ berendezés ". Várom a válaszát.
NEM FOGSZ ÉRDEMLEGES VÁLASZT KAPNI ! ! ! ezek profi csalók ! ! !
اخي لماذا لا تقول لنا ما هو هذا المعدن داخل الموتور الموصل بين المحولات هل هذا فضه
لقد قالها في الفيديو هو مزيج من النحاس والالمنيوم
@@kadirov2005 فضه والالمنيوم
شكرا على الملاحطة..فضة + المنيوم@@user-ik3pq4we9y
I really hope you can tell us the exact mixture of the alloy.. This would be the game changer and I don't think it this will violate any copy right /pattent from the 3 oil giants that own the right to this perpetual energy generator concept
It's a combination of Boran, Argon, Gallium, and indium
We are not heroes, and we do not want to die for saying that information
so what is the point of putting this information up? and so called free energy.... the all world is needed this now more than ever before. this should be an open source information. so every single human in this planet could have free energy. and we could have a completely new world, better planet with no poverty, very low pollution. and free from the people who control this world. making us slaves of them. you could past this information to Dr Greer Steven and make this planet free. @@HiddenTechnology_
@@HiddenTechnology_ are you serious? Are you going to die for sharing the supplier of the material that would allow anyone to machine their part to replicate your Liberty Engine 3? That is the most lame excuse I've ever heard!!!
Maybe I could understand your concerns if you were selling a completed motor. You would threaten the globalists, and they would attempt to shut you down, but sharing a supplier's name and contact information is in no way a threat to you or your company. Are you hiding behind this excuse because you know it will not work when someone attempts to build their motor?
I've built a replica of the two transformers, the exact microwave turn table motor, and the exact 240-volt motor you show in your video to duplicate every part you've used to prove you are real or not. I have left no detail to chance except the mysterious rod/shaft you say is not for sale.
Wake up members of this channel and the general public. They will permanently hide behind the excuse "they are afraid of dying." to prevent the truth from being revealed to the general public!!!!
@@HiddenTechnology_That's the stupidest answer I've ever heard😂😅😂🤣😭😪
Very interesting.
Have you tried inserting neodymium magnets with the same poles opposite each other in the cylinder?
No ! I think because dimentions too far so opposite each other no need! But I don't bealive it work !
@@longanghoai9881 And also, in my opinion, these neodymium magnets should not be perpendicular, but at an angle, in order for the magnetic field to rotate, and this angle should be adjusted to increase or decrease the rotation of this field.
@@bloknot44 There is no rotation field because no has a capacitor ! I don't see any physics = it will no works !
Buy like . Price ?
Where ca we buy this product.
It is not for sale
Can I get a cylinder?
Hello
I want to have the technology and manufacture in my Country India. Please Guide me 🙏
Gr8... The man who mastered free energy, now is selling gadgets on Amazon short affiliate markets... wake up people.
아마존 구입시 무엇을
검색 하여야 하나요
@@user-zu1co8on2n agreed 100%.
Рабочий бтг будет только с использованием материала который не пропускает поле магнита! Так же как шторка кинопроектора перекрывает световой поток! И ни как иначе !
WHERE CAN I BUY THIS CYLINDER ARGALIUM?
604K subscribers nice work))
معليش يا صديقي. اريد ان افهم شوي من السبيكه اين أحصلها. لي اعمل زي انت فعله ان عملك رائع جدا واشكر لك على تصنيع 🧑🏭 كهرباء ⚡️ 🤝🥰👈🏻🌹
Wow best generator but we can't build this so better to buy one 🤔
To The Liberty Engine Project: It seems that there is a lot of diversion, misdirection and misinformation out there. Many people are spending a lot of time, effort and money trying to replicate these devices for the betterment of all. If it is truly your desire to have this knowledge in the hands of the People, at this time, then it seems that more clarification of the Facts is in order rather than allowing the misinformation to continue. Thank you!
Alloy composition roughly calculated 56% Al, 44% Silver
Why do'nt you show the Generator powering loads?
Hi, what is the diagram for the wiring?
We have not made the wiring diagram, because it is very simple. The coils of the transformers are connected in parallel with each other. The motor winding and the socket base are also connected in parallel to the coils.
Where can I Found or buy a similar cilinder. It's only what I need. Can you help. Tks
I need online the adress to buy one
제품구매할수 있을까요.구매할수있는 가격은 어떠게될 까요. 유투브잘보고있습니다
$3 million US dollars, link amazon
сколько металлов в сплаве цилиндра?скажите?
Да там все просто, сплав naebauma 100% и pizdaboliuma 100%
By the data given, the composition is 87.8% silver, 12.2% aluminum.
You're welcome.
To find the composition of silver and aluminum in the cylinder, you can use the density and volume information along with the total weight. Let's denote the following:
Let's call the volume of silver in the cylinder V_silver (in cm^3).
Let's call the volume of aluminum in the cylinder V_aluminum (in cm^3).
You know the total volume of the cylinder is 124.96 cm^3, and you also know the density of the entire cylinder, which is 7.09 g/cm^3. You also have the total weight of the cylinder, which is 884 g.
First, we can calculate the mass of the entire cylinder using the density and volume:
Mass = Density × Volume
Mass = 7.09 g/cm^3 × 124.96 cm^3 = 885.17 g (approximately)
Now, we need to find out how much of this mass is silver and how much is aluminum. Let's use the following variables:
M_silver = mass of silver (in g)
M_aluminum = mass of aluminum (in g)
You can set up a system of equations based on the total weight and the density of silver and aluminum:
M_silver + M_aluminum = 884 g (total weight)
(M_silver / V_silver) = 10.49 g/cm^3 (density of silver)
(M_aluminum / V_aluminum) = 2.70 g/cm^3 (density of aluminum)
Now, you have three equations:
M_silver + M_aluminum = 884
(M_silver / V_silver) = 10.49
(M_aluminum / V_aluminum) = 2.70
Let's rearrange equations 2 and 3 to solve for M_silver and M_aluminum:
M_silver = 10.49 × V_silver
M_aluminum = 2.70 × V_aluminum
Now, substitute these expressions into equation 1:
10.49 × V_silver + 2.70 × V_aluminum = 884
You also know that V_silver + V_aluminum = 124.96 cm^3 (the total volume of the cylinder).
Now, you have a system of two equations with two variables:
10.49 × V_silver + 2.70 × V_aluminum = 884
V_silver + V_aluminum = 124.96
You can solve this system of equations to find V_silver and V_aluminum. Once you have those values, you can calculate the composition of silver and aluminum in the cylinder as a percentage of the total volume.
Let's solve this system of equations:
First, rearrange equation 2 to express V_silver in terms of V_aluminum:
V_silver = 124.96 - V_aluminum
Now, substitute this expression into equation 1:
10.49 × (124.96 - V_aluminum) + 2.70 × V_aluminum = 884
Now, solve for V_aluminum:
(10.49 × 124.96) - (10.49 × V_aluminum) + (2.70 × V_aluminum) = 884
(10.49 × 124.96) - 7.79 × V_aluminum = 884
7.79 × V_aluminum = (10.49 × 124.96) - 884
V_aluminum = [(10.49 × 124.96) - 884] / 7.79 ≈ 15.22 cm^3
Now, you can find V_silver:
V_silver = 124.96 - V_aluminum ≈ 124.96 - 15.22 ≈ 109.74 cm^3
Now that you have the volumes of silver and aluminum, you can calculate the composition in percentage:
Composition of Silver (%) = (V_silver / Total Volume) × 100
Composition of Aluminum (%) = (V_aluminum / Total Volume) × 100
Composition of Silver ≈ (109.74 cm^3 / 124.96 cm^3) × 100 ≈ 87.80%
Composition of Aluminum ≈ (15.22 cm^3 / 124.96 cm^3) × 100 ≈ 12.20%
So, the composition of the cylinder is approximately 87.80% silver and 12.20% aluminum.
@@shaynerismWell done on the calculations 👍I hate to be the one to point it out but You calcs show majority of silver but Your statement says majority aluminum.
Thanks for the calculations 👍
@@Drew_HurstCorrect. I fix. Spontaneous dyslexia is a bitch lol.
Also, that means that here in Canada, the cost of silver alone to make this is a bit over $800CAD... cost per oz used, not spot. Expensive rod, worth it only if it works, obviously.
They said MAINLY sliver and aluminum, so maybe some other metals are used here.
Ineed an 80Kw version please
I wood l like to make one
Funktioniert es auch mit einem anderen Material?
Why u didnt used neodimoum magnets ?
Microwave ones are cheaper and easier to find.