Laser-Cut Wood Sublimation Christmas Ornaments | Sublimation on Wood Using Laminate Sheets
Vložit
- čas přidán 18. 06. 2024
- Combine sublimation and laser crafts with these cute ornaments! I’ll show you a trick for sublimating laser-cut wood using lamination sheets so you can endlessly customize your projects!
Join our Sublimation Made Simple Group:
/ sublimationmadesimple
Grab the free Laser file (#L3) in my craft library: heyletsmakestuff.com/library/...
Supplies used in this video (includes affiliate links):
• Laser cutter (save $500!): glowforge.us/f/SYROZOYE
• 1/8" Maple plywood or other wood: heyletsmakestuff.com/recommen...
• Paper masking (if your wood doesn't have it already): amzn.to/3BPjHky
• Plastic razor blade (optional): amzn.to/3uyfd04
• Sublimation printer with sublimation ink: heyletsmakestuff.com/recommen...
• Sublimation paper: heyletsmakestuff.com/recommen...
• Lamination sheet: amzn.to/3HzvN7B
• Heat press: heyletsmakestuff.com/recommen...
• Heat resistant tape: amzn.to/3oK8gpz
• Craft knife: amzn.to/28K5vhN
• E6000 glue: amzn.to/2WpAiMi
• Ribbon for hanging
• SVG file for cutting: hey-let-s-make-stuff.ck.page/...
• PNG file for printing: heyletsmakestuff.com/recommen...
Helpful blog posts:
• Blog post for these ornaments: heyletsmakestuff.com/sublimat...
• Sublimation Software Options: heyletsmakestuff.com/sublimat...
• Sawgrass Print Manager for PC: • How to Use the Sawgras...
Subscribe to my channel:
/ @heyletsmakestuff
Find me on social media:
Facebook: / heyletsmakestuff
Instagram: / heyletsmakestuff
Pinterest: / heyletsmakestuf
0:00 Introduction
1:17 Supplies
2:57 Cutting the ornament from the laser
4:57 Sublimating the ornament
9:35 Assembling the ornament
10:52 Wrap up - Jak na to + styl
Thank you Cori.
You are so welcome!
What type of printer do you use to print the colored images?
It's a sublimation printer! I have a lot of content here on CZcams and on my blog at www.heyletsmakestuff.com if you want to learn more :)
Hi. Do you clean the inner & outer laser cut edges of the wood before assembling the layers? Thx!
If they are sticky or sooty I will run a baby wipe around the edges, but I don't try and remove the "lasered" edge (like trying to remove the dark brown charring).
thank you for the video. Do you think it is possible with the laser and the sublimation printer to make cardboard jigsaw puzzles?
Yes. You’d need to use a sublimation sticker sheet for the sublimation part, and then probably cut the puzzle from the back.
what if you laminate the wood first then laser cut it and then sublimate it
would that work ? if you tried that can you share your experience
It may technically work, but I am not sure what laminate pouches are made of. If they have PVC in them, that makes them dangerous to cut using a laser because it creates toxic fumes.
How well does the laminating sheet still to the wood? I would be doing it without the layer on top. Thanks for sending me your link. I will subscribe
It sticks pretty well. You may have to play around with the settings of your particular wood/laminate/heatpress but I haven't found it peels up. I've done it in non-layered projects as well.
If you laminate the wood prior to cutting the shape, would it be safe to cut that in the glowforge?
Hmm, that's a good question! I'm actually not sure. I did a quick bit of research and according to this site there are some plastics you shouldn't cut: www.troteclaser.com/en-us/learn-support/faqs/unsuitable-materials-laser-processing. But it looks like laminate sheets are PET and EVC, which aren't on that list. I'd still be very cautious cutting any sort of plastic not designed specifically for laser cutting because of toxic fumes.
Hi! I am awaiting for my Xtool P2 laser cuter to arrive. I do not have a sublimation printer yet but am looking into purchasing one as well. My question is, can I apply a sublimation image to my wood and then cut out the design (like a puzzle)? Do you have a tutorial for that if so? thank you!
I don't have a tutorial, but I think it's possible! I would use this same technique with the laminate to sublimate your image, and then I'd flip it over and cut the puzzle from the back. Or I'd mask the puzzle and cut it from the front. Now you have me thinking...I'll add this to my (very long) list of tutorials to make!
@@HeyLetsMakeStuff so sorry! lol I just bought a Sawgrass SG500 printer after watching your videos from the link you provided. My husband is less then thrilled lol. Thank you though!!
Ha! I hope you enjoy it-I love combining sublimation and laser projects!@@831aleacim
Can we use polyurethane clear coating?
I would think that would be fine!
Have you ever tried cutting your laminate sheet on a cricut?
I haven’t but I’m sure it would work! I’ve cut similar materials. I just didn’t want to add a third crafting machine to the mix for this project 🤣
@@HeyLetsMakeStuff couldn’t you use your glowforge to cut the laminate
@@woodburykim Maybe? I haven't cut laminate on the glowforge before :)
There is no svg! ☹
It's in the supply list :)
the link for the free file is asking for a password
You can get the password here: hey-let-s-make-stuff.ck.page/d5a50cfb5d