Video nenà dostupné.
OmlouvĂĄme se.
WASH BASIN INSTALL - Taps, Plug and Waste pipe
VloĆŸit
- Äas pĆidĂĄn 1. 12. 2017
- Ever wanted to fit a wash basin? This video will show you how to fit your own wash basin like a boss plumber!
đ LEARN PLUMBING ONLINE IN MY STRUCTURED COURSE (50% Before March): www.learnplumbi...
đ AMAZON TOOL STORE: www.amazon.co.u...
đ„Ÿ 10% Off my workboots + workwear Use Plumberparts10: www.bigboots.c...
đ 10% Off Safestyle Sunglasses Use PLUMBER10: safestyle.com....
Learn Plumbing Online is perfect for future apprentices, homeowners who want to understand and tackle more plumbing jobs in the home, handymen who keep turning down the odd plumbing job and more. With practical follow along video lessons and discussion board you can boost your knowledge in my amazing trade. Sign up now: wwwlearnplumbin...
**VISIT OUR SPONSORS**
www.traderadiat... | www.stuart-tur...
*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts
Plus, follow my *Vlog âTimesWithJamesâ:* czcams.com/users/timeswithjames
Useful reminder video for a keen amateur like me who only does these jobs occasionally. I tend to use silicon sealant on all the sink fittings where they joint to the ceramic, including the tap and plughole fitting. Where Iâve just trusted to the rubber seals in the past Iâve had problems. I only use plumbers mate on the threaded water pipe fittings. Also on a basin like that a lot of them have a couple of fixing holes for screwing to the wall so you need to get a pair of basin wall fixing screws (a threaded stud with a plastic screw fixing that clamps the basin back to the wall). Once the cabinet and basin are fitted you also need to silicon joint the gap to the wall. I donât do soldered joints so I either use compression fittings or push fit fittings for copper. Iâve also used plastic pipe with push fit and compression fittings and that is very quick and easy to use. I realise some professional plumbers look down on plastic â caravan plumbingâ but itâs much easier to use and has been reliable for me.
I am doing my basic apprenticeship in Luxembourg đ±đș , your videos are quite helpful . In Luxembourg đ±đș plumbing system is quite advanced .
Great video, before I put the waste in place I put a bit of insulating tape on the top of the rim above the aperture for the overflow as a guide to make sure that it would be aligned accurately.
This is gold mate, thank you for making these videos, Iâm gonna have a crack this weekend at fitting my new sink. Your tips will definitely save me some time in troubleshooting frustrating leaks !! đ
Deserves more likes !!
You are a legend, really really helped me out now so much. I only carried on listening to you when I heard you say hold tight a few weeks back as it tickled me but I havenât stopped watching and educating myself through your videos practicing on my own system & changing, draining, refilling de-sludge rads how to replace inhibitor and adding extra rads how to balance systems for friends and family. Just booked my course. You are ace đđœ
How you getting on five years later
Excellent video. I really like how you keep your explanations straightforward and relevant.
And as a chippie from the golden age, I applaud you for your attention to quality and longevity đ
Great video mate and very helpful and loving your sence of humor as you work and thank you for sharing your wisdom ......
Thank you so much easy to follow and fun to watch great video
Just fitted my first bathroom tap and plug thingy easy peasy. Thanks mate.
Brilliant tutorials. Helped me out so much. Subscribed, liked and recommended.
Couldn't agree more about the pipework being neat for future repairs, nothing drives me nuts like service valves facing the back of the unit or drain offs so low you can't attach anything on them!......... Or snots of solder all over the place so it's difficult to cut the pipe where you want, flux left on fittings so they turn green, flexis bent and kinked within an inch of their life, the list is endless.
Top man, good fun and really informative and great to watch and learn things. Great guy to watch and great to see a bit of humour ....!!! Thank you
I think a good idea would be to set up your amazon affiliate account to link to tools you use day in day out...
i.e.
- plumbers mait
- you holesaw bits for pipe holes
- flux
- solvent
- makita tools you use.
etc etc - it will all add up.
Very informative video, i really like those wide grip wrench pliers but couldn't see them on the link unless they have been discontinued..? Cheers
Thanks for this. It is very easy to follow and appreciated.
mate these vids are Awesome , it's like proper training, but for free , thanks mate ,
Great video mate. Just watched that then fitted my own. Cheers đ
I LIKES YOUR VIDEO I M LEARNING PLUMBER WORK THANKS FOR GIVING US KNOWLEDGE
Thank you I'm trying to learn plumbing from your video s thank you
How do you tighten the pipes donât like the idea of hand tighten pipes under pressure.
All your videos are very educational. Thanks
I do really enjoy your videos
Great job and video mate. All the best!
I have just bought a ceramic basin for the bathroom that just has a hole for the overflow. What sort of trap will I need, is there one where you have a hose that connects the overflow to the trap? I removed the old sink following your videos, first time I have attempted anything like this. The place where I bought the sink from didn't have a clue what I needed!
Can you do a vid converting two sink taps into a single mixer?
Love your contentđ
Thanks
no trap?
The definition of quality pipework đ
when using one of these to connect a basin waste does the soil pipe smell come up through the plug hole
Hi there, wanted to know why didn't you apply a p trap under the basin
Can u make a video on how to choose the right size tap faucet an how to put them on your taps please....Love watching ur videos, u make everything look so easy.
that was amazing mate, you made us seem easy and seamless
No trap.? Unusual!
What is the purpose of the two exterior side holes (left and right side of sink)? On others there is only one hole towards the bottom side. Links with the overflow but what is it for? Not easy to use the plunge unless one has three hands available
Plumbers mate. A thing of nightmares. Itâs a plumbers enemy
Very helpful. Thank you.
a question please , at 9:35 instead of soldering , can I use a 90 compression fitting to join the water pipes to the Tap ?
another thing I noticed that there was NO trap fitting for the Waste pipe đ€š
Hi their, Can you please do a video on what to do if you've got a cold water lever tap that make a Whooshing noises, love all you tips and videos. Cheers
*It fits description.*
shouldnt the rubber washer be the other way round or doesnt it matter , goin straight upto the plumbers mait ??? plug diagram shows the other way.
Great vid, if you could clarify when you screwed the two flexi pipes to the tap, are they hand tight? I didnt see how you tightened them?
Never seen a mixer tap fitted ,the great vid shows the flexi pipes fitted, is there any way to tighten them, ? as they look like a leak waiting to happen
That valve looks good and seems easy to install but I canât find to buy it.
Can you please let me know what is it called so I can search for it.
Taking on my first project and need to keep it as simple as possible.
Many thanks.
ISO;ATION valve bit awkward to get too, could maybe have been lowered a bit.
U not have a sink trap underneath?
Should an S bend be put in the drain to stop potential smell from coming back up through the grey water?
Hi i love your videos. As a plumber ive learnt quite a bit as my companies quite limited. Where did you get your grips from please
They're Nerrad bro!
Can you please do a video on the Bidet Shower Hose install. Used it in japan and they were awesome. Only videos available are US style.
Brilliant video as usual! Thank you!
Hi mate. How would u put pipe clips on if you've already put the hot and cold copper pipes on.
I noticed you didnât install a trap underneath the basin (sink), in the US we have to under the sink, is the code in UK different.
"It's gone 5 so I'm bodging it and leaving" -- classic tradesman.
Hi . I hope you can help me. I have a falcon combie boiler, it's quite old. The hot water works fine turning on and off on demand.But when i turn the central heating on it fires up and runs for about a minute then the pressure needle climbs quickly to 2 bar and it cuts out! The pressure is one bar from cold, and not losing pressure.any ideas???
thank for vedio for basin fitting..
Is it okay to run a waste pipe upward? It's literally only a very slight incline for about 10cm. The new sink I'm fitting to replace my broken one has a different water trap which sits lower than the waste pipe coming through the wall. So I need to use some corner pipe to bring it down a bit. I'm a programmer not a plumber so I'm doing my best lol
The guy on the video is really handsome his blue eyes đđ and love his accent
would be better if you'd weld a copper fittings with thread on those copper pipes coming from wall and just bought longer flexi hoses to connect! that way its easier to disconnect and move the cabinet away from wall, otherwise if you need to move the cabinet you have to unsolder the 90deg bends
Very helpful, thanks
What about incompatibility between plumbers mate/putty on those non metallic washers?
Have you got any videos on push taps? Iâve got a set of diva ones at the school I work at and the cold side always gets stuck. We had a set of swan taps before that were a nightmare to use as they were always scaling up. The diva ones I canât seem to get into the workings in the head to either tighten the spring or clean it out.
Loving it!!
Great video, thanks
Can you show how install an under-mount kitchen sink, and where to purchase fittings to hold?
I'm 6'6" tall and would dearly like to have my washbasin 10 or 20 cm higher. Unfortunately the pedestals and cabinets are all a standard height. I don't want a wall hung basin in case I leaned on it getting up. Any suggestions?
What glue do you use to join both pipes together please? And was are those join fittings called also? Thanks
Do you have any tips for space saving ideas for cloakrooms? I am planning to place a surface sink on top of a WC Unit, the only issue I have is the trap being in the way of the flush unit..
I noticed it looks like you ran the tap tails directly onto isolation valves. Is this detrimental to the rubber seals in the tails do you know?
Where did you get the washer that goes up against the Plumbmate? We canât find one anywhere đ«
Is there any reason why you prefer to use plastic weld waste pipes rather than push fit?
If for some reason need to replace the cabinet I must cut the 2 copper line's, that's more hard work for the next one for no reason. You save money and effort but I won't... Right?
Hi, I've got to connect to an old copper waste pipe, how do I connect a new pvc waste pipe to the copper? Love your videos btw - incredibly helpful!
Great videos, mate!! Keep em coming!!
Iâm trying to change my basin waste but the basin is already installed against the wall with silicone (nothing else) and thereâs no room to use my adjustables to undo that bottom nut? Any suggestions? If thought about tube spanners. but I canât find one big enough. Help me Sir James.
Very helpful
Hi guys hope you enjoy! If you need any help then just comment and REMEMBER to follow me on Instagram here: www.plumberparts.co.uk/social.php?social=Instagram and send me your #PlumbProud and #WildWestWednesday pics!
Why donât you use the âbasin mateâ conical rubber washer to seal the waste?
Not permitted in Australia,only s&p trap hard connection
Great video mate, is using compression joints or push fit acceptable, soldering looks a bit scary to me/đ Thanks, Gavin
It is if you're not a plumber!
what parts do you need to fit waterfall taps to a bath
Why does my waste look nothing like yours?! Itâs a universal for slotted or unslotted sinks. Comes in a few pieces. Iâm going to try plumbers mait anyway and see how it goes.
Wish me luck!
Anything on fitting countertop basin waste?
How did you connect those two little flexible connector to the pipe? What connectors did you use? In that standard connectors? Love the videos
hi, do you dampen the soldering mat before using? thanks.
Thanks mate!
How much would u charge for doing this job from start to finish mate
Great video James,thereâs so many comments I couldnât see if the question I want to ask was already asked,Iâm referring to the trap think you called it a Mac valve I presume itâs McAlpine itâs like a bottle trap but itâs straight down,I looked on Grahamâs plumbing site and couldnât see one like that.Could you tell me where you obtained one.Thanks Lenny.
czcams.com/video/XHqCVGuSqyQ/video.html
Good job mate. Keep it up.
Cheers dude!
James can u buy a btu device for working btu per room some2 told me there is a device that if u bring it into a room it measures wide by length by height and it works out the btu do u know anything like that or what calculator do u use
Why dont you apply sealer to the top side of the waste fitting?
8:05 what is that valve called?
What is that glu name what do you put this name
Hi how do you have the 2 15mm hot and cold feed go into a mixer tap? Mine has flexi pipes but have low water pressure so trickles out. Thanks
Could be your make of tap, it may need high pressure to operate not like a standard mixer tap
I would like to ask a question but there is no u bend under the sink I literally know nothing about plumbing but I watch most of your videos to learn it and I googled what the u bend is for and they said its to stop gasses coming back up through the pipe sorry if it is a silly question thanks in advance
That was what he used at the top of the pipe work. Works the same way but without the bend
Do you just do plumbing or you although do the tilling and flooring? Are you doing gas at all?
If a plumber don't have tilling skills does that affect from not getting a jobs? Some customers prefer same person do the whole bathroom work for them!? How important for a plumber knows how to do tiles
Nice man! I know how to fit the taps, but was wondering what I was gonna use on the flexi, to get the nut end on, Inside the recessed tap body, hand tight they are then đđ
Agree i always feel safer if i have tightened them just a bit,, also i was always told to put a plugged and tee on the waste in situations like this, not just elbows,I thought the basin would need some mastic to lock it on the worktop, Funny how we all have a slightly different idea,s.
Hi where do u get them washers from
Very nice great guy
Still searching for lever operated basin taps that aren't quarter turn non-mixer type. It's a long old slog.