Finally, a man who's willing to go behind the curtain and talk about the things the other videos didn't (in fact some of the videos go out of their way to say 'these are all factory adjustments, don't mess with them') It turns to that those adjustments you mentioned were the ones that eliminated the chattering (big screw / little screw on side). Thank you very much.
Brother!!! I was doubtful that I would find the information that I was looking for before I searched. I've had my masters for over 14 years and I didnt want to get rid of them. I cant say enough how thankful I am for this video!!! Cheers and thanks!!
Sometimes its hard to understand what he is trying to say , but you can tell this dude knows how to disassemble his clippers and put them back together. Thanks , much help👍🏽
this video was most definitely helpful. In cosmo school and they have been real noisy. i fixed the tension screw and they run real smooth. thanks for the video.
Thank you I bought an Andis Master in like new condition still in box but blades weren't moving for $30 for parts as is. Fixed with this video and got my self some good running clippers for bargain.....Thanks Bro
I love my master dude. And I had them in the morgue for about 5 months debating if I should throw cremate them, bury them or just hold on. I'm glad I held on brother thank you 🙏🤜🏾🤛🏾🤜🏾🤛🏾
Thanks! Mine purrs like a kitten now. I adjusted the tension screw and the left to right on the side. Would not have known that without this video. God Bless.
i get that clatter noise after I do a haircut and I always thought it was because hair was getting stuck somewhere in the blade while brushing it off and that was the reason for the loud noise I get after a cut, Im excited to go into work tomorrow and try tweeking it a bit with these tips to see if it gets rid of the sound!!! Ill let you know how it works! wish me luck!
My issue was the power screw which is the smaller screw on the right side.. it was slipping it took me many years to figure this out but today I put plumbers tape around it after I cleaned it real good. It's nice and stiff now it will never move again. But taking the Clippers completely apart is a good thing you will quickly learn how it all works together just by looking at it I will suggest getting a headlamp that you can put on your forehead to work on it.
Hey just a tip for people trying to figure out why there clipper is clattering is to make sure you attach both blades to original position, i was testing them without it after adjusting it and it would continue to make noise and after i installed it, it was fine
I watched your video and it was very helpful, I played with my machine till I got it working good, removed the lower tab as well to get a closer cut. thanks garrick white
Thanks alot bro you saved my masters, I took em apart to do a deep clean and when I put everything back in they where clicking like a MF I gave up on them for about a month, turns out it was the cutting blade holder, it was set to far back and it was rubbing against the metal on the masters.. all I did was adjust it and it was good as new !
i believe I may have the same problem with mine. i bought a used set that needed a replacement blade because of a chipped corner blade tooth. Put new blades on and there was still the metal on metal sound. vibration and clatter.
Thanks brother!!! I feel like a heeeehaaaaaa dunkey lol smh i had my andis for 11 years. And how i even forgot bout the two screw on the side. Thanks agein brother!!
Thanks man I'ma try to adjust it one more b time and if the problem continues I'm definitely going to try the grit sand paper because I think the fade blade is too sharp
That's the problem the points on the end of the blade is to pointed and sharp because that blade is very thin file the points down a little not to much but continue to do it until you notice it stop snagging the pores and be sure to do the ends on the blade because that's what snag the most
How do you make it to get to the first notch? I've seen a lot of videos complaining bout it, and I just bought a pair but it seems like I can't just get them to get to the first notch. Thanks in advance
lobe you're vids but I have a question... everytime I use the tension screw to adjust the cutter blade it goes right back to make the loud clatter please help... how can I fix this
1 timedime. If you have tried tuning it by the small screw on the side with no success, then you'll need to tune all the way. You'll need to take the lid off, next takes some neddle nose pliers and turn the bigger screw on the side in all the way, then turn it one full turn back. After that loosen the tension screw in the clipper but don't take it out. After that use a screwdriver to lift up the magnetic arm from the top of the clipper where the two allen screws at. once you do that turn on the clipper, it'll be be running loud, but start turning the tension screw back in and you'll start hearing the clipper quiet down. Next tune it from the side smaller screw until running full power, put lid back on, oil blade and you're set..
Mine just started giving me problems ,I've tried to adjust the screw on the side but it slowly turns back to the way it was previous and starts making that loud noise again!!
What tool do I use for the little holes tho? I know I have to loosen the flat head screw than tighten the other one with the holes, but what tool do I use for it?
Bought these brand new from Sally’s and loud as one could imagine. Non refundable and I look online to see there could be 5 different reasons all requiring all kinds of tuning to fix OUT THE BOX. Never again with this brand.
Garrick White , I have a problem that nobody answered me. My clipper make loud noise because I think the arm is too loose. Even though I turn the side screw to adjust the armature, it changes nothing. If I turn it clokwise, its louder and louder, but if I go counter clockwise, it become smooth because the arm doesnt moove then my blade doesn't moove.. Help? We can skype to show you
Just screw the smaller screw out almost all the way then screw the bigger one in all the way use some needle nose pliers or scissors to turn the screw , after the bigger one in all the way turn it back a quarter of a turn then screw the smaller screw in adjust it until it runs smooth that should solve your problem I'm talking about the screws on the side of the clipper
@Thanks Man! Perfect! On point ! And just to know, do you know how I can get more performance but less vibration? I dont mean noise, I just mean in your hand it vibrates much..
By the way also oil your clipper and that will make it run smoothly put some on the cutting blade and the side of blade On Dec 1, 2014 2:04 PM, "Garrick White" wrote: > Just adjust the small screw on the side but if it's vibrating hard that's > good performance there
Garrick White Okay man, well I think you're right, the more it vibrates the more it cuts. Anyways man, thank you for all! Appreciate your help! keep up the work, you have my support from France!
Mine keeps getting caught in like my pores by my temple how would I stop that it's pretty painful is it just that the blade is to sharp I have the fade master blade on
PEOPLE Theres a hidden secret to the Andis Master you can make it quiter than the BabylissPro and I have the ( Corded one which corded one tends to be a lot louder 😂😂😂Im telling you Quiter than Babyliss Pro Open or closed same silence 😎
Finally, a man who's willing to go behind the curtain and talk about the things the other videos didn't (in fact some of the videos go out of their way to say 'these are all factory adjustments, don't mess with them') It turns to that those adjustments you mentioned were the ones that eliminated the chattering (big screw / little screw on side). Thank you very much.
Brother!!! I was doubtful that I would find the information that I was looking for before I searched. I've had my masters for over 14 years and I didnt want to get rid of them. I cant say enough how thankful I am for this video!!!
Cheers and thanks!!
This helped me so much!! I was about to give up on it but this solved my problem! Very knowledgeable, thank you!!!!
Garrick is an Andis Master Ninja! This is a huge help. Thank you Sir!!
Sometimes its hard to understand what he is trying to say , but you can tell this dude knows how to disassemble his clippers and put them back together. Thanks , much help👍🏽
no 🧢 u all over the place with this video, i dnt even know where to start to fix mines b/c u are addressing so many areas of concerns
Finally somebody explained the parts of this clipper that I needed to hear.......Thanks.....I'll soon get to fixing on my Fade Masters
this video was most definitely helpful. In cosmo school and they have been real noisy. i fixed the tension screw and they run real smooth. thanks for the video.
Thanks for the clipper tune up lesson. Andis master is unrivaled in cutting and now I fixed mine up instead of buying a new one
Thank you I bought an Andis Master in like new condition still in box but blades weren't moving for $30 for parts as is. Fixed with this video and got my self some good running clippers for bargain.....Thanks Bro
Brother you are a life saver. this tutorial saved me some money and time and my andis! Much. Love. 👍👍👍
I love my master dude. And I had them in the morgue for about 5 months debating if I should throw cremate them, bury them or just hold on. I'm glad I held on brother thank you 🙏🤜🏾🤛🏾🤜🏾🤛🏾
this is exactly what I needed. My clippers are working like new.
Couldn't find anything on here to help me. Your video told me everything I needed to know. Thank you
This helped a ton. Got a set of 70 year old masters that had way too much noise. This made this run like new. Thanks dude!
U helped me a lot to get my andis masters back working after I dropped them
Thanks! Mine purrs like a kitten now. I adjusted the tension screw and the left to right on the side. Would not have known that without this video. God Bless.
I'm not gonna lie after watching your video I fixed my Andis masters after them not working for over 5 years
Appreciate the content. My masters is working good as new now 💪🏾 God bless
Thank you very much for this, sir. One quick adjustment and my silver Master is back in top form.
Your welcome
Thanks bud! Saved me some money not having to buy another set of clippers. Great info.
4:22 got mine sounding just like his! Thanks brotha🙏🏾
7 years later this vid helped me. The more you know
Thank you for this video! I was close to just throwing mine in the trash but I think this troubleshooting did the trick.
i get that clatter noise after I do a haircut and I always thought it was because hair was getting stuck somewhere in the blade while brushing it off and that was the reason for the loud noise I get after a cut, Im excited to go into work tomorrow and try tweeking it a bit with these tips to see if it gets rid of the sound!!! Ill let you know how it works! wish me luck!
3:02 This solved the issue I was having. Really appreciate this video, man, it helped a lot.
Thanks man, I really appreciate it. I couldn't figure out why my clippers weren't acting right! This helped out plenty.
Man I wanna thank you so much for this man if I could pay you I would thank you so much uncle!!!!
My issue was the power screw which is the smaller screw on the right side.. it was slipping it took me many years to figure this out but today I put plumbers tape around it after I cleaned it real good. It's nice and stiff now it will never move again. But taking the Clippers completely apart is a good thing you will quickly learn how it all works together just by looking at it I will suggest getting a headlamp that you can put on your forehead to work on it.
@eric ellis sr you're welcome and thanks for the compliment
thank u so much brother they stopped chattering very smooth and quiet I cant say enough how much this helped
Wow awesome video man! Got my rattling problem fixed super quick!
Hey just a tip for people trying to figure out why there clipper is clattering is to make sure you attach both blades to original position, i was testing them without it after adjusting it and it would continue to make noise and after i installed it, it was fine
I watched your video and it was very helpful, I played with my machine till I got it working good, removed the lower tab as well to get a closer cut. thanks garrick white
thanks for the video bro. much appreciated by many barbers. -cali barber
Thanks alot bro you saved my masters, I took em apart to do a deep clean and when I put everything back in they where clicking like a MF I gave up on them for about a month, turns out it was the cutting blade holder, it was set to far back and it was rubbing against the metal on the masters.. all I did was adjust it and it was good as new !
Glad they're straight
i believe I may have the same problem with mine. i bought a used set that needed a replacement blade because of a chipped corner blade tooth. Put new blades on and there was still the metal on metal sound. vibration and clatter.
+1985themovement you tried tuning it with the small screw on the side
Thank you sooooooooo much for the instruction. I was able to fix my Andis Master perfectly from your video.
Thanks bro you really helped me out I was at a complete loss.
Thank you! I couldn't get these to quiet down for nothing!
I like how you call them the cutter blade and the calm blade.
Thanks brother!!! I feel like a heeeehaaaaaa dunkey lol smh i had my andis for 11 years. And how i even forgot bout the two screw on the side. Thanks agein brother!!
thanks man, was able to fix the pressure screw because of this video
helped a lot.,. got my 5 yeat old machine back to work like new🔨💣
Thank you for this video, it was so helpful!🙏🏽
Hannah Dorton u cut hair
Thank you sir. Very helpful 👌🏾
That's this video is the best I was able to fix my clippers in less then ten mins. Thanks for the help bra
Thank you for this video!! Helped me so much!!! I fixed my clippers.
This video saved my clippers. I was close to trashing it
thank you this helped me a lot with the right explanation
@TL Just adjust it properly and it will be fine
Great video. Really got masters on point
Thank you. You are awesome.
This helped me soo much, thank you!!!
I had to turn the screw on the side. I was about to throw mine away. Good looks
Preciate the help, God bless brotha🙏🏽
It worked. Thanks.
Bruh you are a life saver. Thank you!
Video was a lot of help brother, thanks
Does it eat into your guards when zero gapped great tutorial brother
Problem solved. Thanks.
This guy is the 👑
Thanks man I'ma try to adjust it one more b time and if the problem continues I'm definitely going to try the grit sand paper because I think the fade blade is too sharp
That's the problem the points on the end of the blade is to pointed and sharp because that blade is very thin file the points down a little not to much but continue to do it until you notice it stop snagging the pores and be sure to do the ends on the blade because that's what snag the most
Make sure to round the ends off they're are square now and those points is what doing the snagging
man, that was a great informative video
Very helpful. Thanks.
You're welcome glad I could help
Thank you sir 💯
Thank you so much!
Do have a video on how to zero gap your andis fade master?
Worked thanks!
Thanks for the video brotha it help me out good
,@Jorge Perez thanks and barber luv
good work my dude
fantastic video :)
Thanks big bro!!!
HOW TO STOP ANDIS MASTER LOUD CLATTER/TUNE: czcams.com/video/F94bOCcZPSs/video.html
Thank you the noise stopped!
Cwippers
Do u have a video to fix the lous noise the cordless andis master makes? My clips run so loud!
How do you make it to get to the first notch? I've seen a lot of videos complaining bout it, and I just bought a pair but it seems like I can't just get them to get to the first notch. Thanks in advance
Great video thanx for the info
You're welcome!!!
Garrick White bu makinayı nerde bulcaz
Cemil Durak Eger abd bu alabilirsiniz
I love you my brother
lobe you're vids but I have a question... everytime I use the tension screw to adjust the cutter blade it goes right back to make the loud clatter please help... how can I fix this
adjust the small screw on the side as well
question when you're cutting blades slows down or stop does it mean the tension is 2 much and what can I do to stop it from happening ?
1 timedime. If you have tried tuning it by the small screw on the side with no success, then you'll need to tune all the way.
You'll need to take the lid off, next takes some neddle nose pliers and turn the bigger screw on the side in all the way, then turn it one full turn back. After that loosen the tension screw in the clipper but don't take it out.
After that use a screwdriver to lift up the magnetic arm from the top of the clipper where the two allen screws at.
once you do that turn on the clipper, it'll be be running loud, but start turning the tension screw back in and you'll start hearing the clipper quiet down.
Next tune it from the side smaller screw until running full power, put lid back on, oil blade and you're set..
Thats a WHOLE lodda dogone cladda goinzone bra
hey garrick, what if my masters only clatter everytime i oil them up? even then, i try to adjust them but it keeps clattering :/
MCFriedChicken1 same here man.... got it brand new. .. after 4 cuts... I oiled it then started to make a noise.. I loosen the side screw didn't work.
Mine just started giving me problems ,I've tried to adjust the screw on the side but it slowly turns back to the way it was previous and starts making that loud noise again!!
great video. how to I get my masters to stop the whistling or squeaking noise? and it happens about a min in to my cuts
you tried oiling the blade
What tool do I use for the little holes tho? I know I have to loosen the flat head screw than tighten the other one with the holes, but what tool do I use for it?
a pair of neddle nose pliers that will fit the holes
Bought these brand new from Sally’s and loud as one could imagine. Non refundable and I look online to see there could be 5 different reasons all requiring all kinds of tuning to fix OUT THE BOX. Never again with this brand.
Garrick White , I have a problem that nobody answered me. My clipper make loud noise because I think the arm is too loose. Even though I turn the side screw to adjust the armature, it changes nothing. If I turn it clokwise, its louder and louder, but if I go counter clockwise, it become smooth because the arm doesnt moove then my blade doesn't moove.. Help? We can skype to show you
Just screw the smaller screw out almost all the way then screw the bigger one in all the way use some needle nose pliers or scissors to turn the screw , after the bigger one in all the way turn it back a quarter of a turn then screw the smaller screw in adjust it until it runs smooth that should solve your problem I'm talking about the screws on the side of the clipper
@Thanks Man! Perfect! On point ! And just to know, do you know how I can get more performance but less vibration? I dont mean noise, I just mean in your hand it vibrates much..
Just adjust the small screw on the side but if it's vibrating hard that's
good performance there
By the way also oil your clipper and that will make it run smoothly put
some on the cutting blade and the side of blade
On Dec 1, 2014 2:04 PM, "Garrick White" wrote:
> Just adjust the small screw on the side but if it's vibrating hard that's
> good performance there
Garrick White Okay man, well I think you're right, the more it vibrates the more it cuts. Anyways man, thank you for all! Appreciate your help! keep up the work, you have my support from France!
I wanna know see what you did to zero gap.
Thank you sir
my trimmer is getting heated up.what would be the problem
Son this a creat video but maaaan it’s blurry as heaaal Sir 😂😂😂😂😅
💯🙏🏼
I've played with the tension and the side screw but my masters seem so weak. I can easily stop them with my fingers
Have you tried screwing the other bigger side screw in all the way then a quarter turn back check the video out again when I talk about that part
Mine keeps getting caught in like my pores by my temple
how would I stop that it's pretty painful is it just that the blade is to sharp I have the fade master blade on
Look at my video on wahl balding clipper snag & pulling do the same exact thing with the fade master blade only the comb blade not the cutting blade
Perfect
Can u do a cordless
PEOPLE Theres a hidden secret to the Andis Master you can make it quiter than the BabylissPro and I have the ( Corded one which corded one tends to be a lot louder 😂😂😂Im telling you Quiter than Babyliss Pro Open or closed same silence 😎
Good vid right chyah