Stall Turns! 3D Basics, with sticks and telemetry
Vložit
- čas přidán 15. 07. 2024
- As part of our 3D Basics series we have an in-depth look at the 180 degree stall turn.
We break it down into simple parts, and then go through flying this manoeuvre in different ways, how wind affects it, and variations/orientation changes.
0:00 Introduction
0:17 Breakdown
1:09 Stall Turns
2:33 Hesitation Stall Turns
3:31 Stall Turn Reversals
4:25 All Orientation Stall Turns
7:33 Compound Stall Turns
9:05 Upwind / Downwind Stall Turns
10:53 Conclusion
Supported by:
Hely-Shop
www.hely-shop.co.uk
EGODRIFT Brushless Motors
www.egodrift.com
Tron Helicopters
www.tronhelicopters.com
360 RC Technologies
/ 360rctech
#RCHelicopterRichard #RCHeliSkills #TronHelicopters #RCHeli #egodrift #tronhelicopters - Sport
Best explanations. Cannot wait for more about other manœuvres ...
Thank you.
More to come!
Best of the best show! Amazingly explained, and how to get the sticks' movement input at the right position! You are legend and thanks for such great show! All the best 👍
Thanks, very kind of you!
Excellent vid Richard and perfect to follow and improve 3d Sport Flying aspects - I haven't flown for a while or done any Heli Shed stuff - life priorities etc but, looking forward to good weather and jumping back in!
Way to make one move into a whole bunch to work on!
Outstanding video and production more videos with more basic 3D for us novice to intermediate pilots please
Thanks Lee, I appreciate it. More video, and more data on the way!!
Thank you Richard! It became clear for me in the first moments why my stall turns always looked very different from yours: I was initiating the quarter loop mainly with elevator and did not add so much positive collective. Thats probably the reason why my loops are rather small and tight. Now I undrstand that the big amount of positive collective kind of "pulls" the heli rather forward and upward! Once again your video is brilliantly explained and edited. The stickmoves are explaining so much. I hope the weather allows me to try this tomorrow. It's rather terrible weater right now in Poland. Best greetings!
Let me know how you get on. Would love to hear if it makes a big difference.
@@rchelicopter Thank you Richard for your interest! I will let you know for sure! Unfortunately rain from the morning today! But at least I try this on the simulator first
@@rchelicopter Richard, I tried to do stallturns with a lot more positive collective pitch and noticed at once that I have much more control when "shaping" the upwards curve! It's such a big difference! As a side effect my loops are now getting much bigger: I also used much more elevator than pos. collective to initiate the loop! Thank you so much!
@@RCCopterLove That's amazing. So glad to hear it!!
Love the telemetry readout! Very cool
BTW surprised with the Amps it's pulling
Thanks. I'm not convinced the amps are correct. That does seem a little high.
@@rchelicopterwhat ESC if you don't mind my asking? On the side turns with the tail pushing and full collective looks more reasonable. On the straights it sounds like you are running a lot of pitch too so maybe there is that. Anyway, just out of curiosity.
@@apostolosnt Scorpion 12-130
I love the telemetry overlay and the stick movements although I know that vbar only capture the input every 500ms. It’s a really nice work regardless
Yeah, it's a pity about the logging rate. Stick movements work for slow stuff, but faster stuff like tictocs just don't show properly.
May be if you can / have interests to use rotorflight and use vbar RX, then you can probably use its black box feature to get quick sticks inputs. But I know it takes time to setup correctly
Spin me right rond you spin me right round dammit now i gotta go fly
Very nice video, love the telemetry and inputs overlay! By the way, your gearing seemsa bit off for the Bank 3 2100rpm headspeed; your PWM is often hitting 100% even with those smooth manouvers. Need a bigger pinion? thanks again for the great content !!
You're bang on the money, first to notice. I have 550kv on the bench as we speak 👍
Awesome. Wondering where the telemetry overlay comes from and how you pull and feed the data to it?
Thanks. The data comes from the VBar logs. I wrote an app that parses the data and generates the overlay.
Thanks for new one tutorial. Can you make video how to lean piro funnel?
Have you seen the video on pirouette flying? It's one of my better ones, and goes into hoe you would learn them.
@@rchelicopter Thanks. Watching now.
Sup, buddy. Sunson was here. Any plan for the next Streaming?
Streaming? I don't think it's that popular. I think people prefer to watch training videos.
@@rchelicopter oh, typo. streaming.
Do you mean the simulator live stream, or the build/maintenance one?
@@rchelicopter yes, anything like that. live stream:)
Richard, how do I send you coffee-money for the work you do for us?
I stopped at 2011, came back because of Goosky. Saw your simulation classes. Dropped flying in the real world and follow your classes.
Thanks, very kind of you. There should be a super-thanks button somewhere, or join as a supporter. I've got buymeacoffee somewhere, but it's probably easier through CZcams. Appreciate it 👌
@@rchelicopter I joined through a monthly sub to your channel.
@@Ariautoace Amazing 🙏 Working on a new video right now