Installing a DIP bolt knob on a CZ 457 .22LR Rifle
Vložit
- čas přidán 4. 03. 2020
- Get your own DIP CZ bolt knob upgrade here: www.diproductsinc.com/Detail....
Follow me on IG : @ZackCarlson_Writer / zackcarlson_writer
Support me by buying anything from Brownells, they support me so please support them. Click here: bit.ly/2Im76hO
Support the channel by buying something from PSA: bit.ly/2TQqche
Or lastly buy anything from Amazon, and I'll get a small percentage. : amzn.to/2XzEHII
Disclosure: Some of the links in this post are affiliate links and if you go through them to make a purchase I will earn a commission. You will not pay any more for going through my links. I link these companies and their products because of their quality and not because of the commission I receive from your purchases. The decision is yours, and whether or not you decide to buy something is completely up to you. - Zábava
Short and to the point! Excellent video, Thank You!!!
I have all four sizes of those wrench pliers, they are awesome!
Replaced all my old comparable tools, needle nose, water pump pliers, these plier wrenches, all my electrician tools, with Knipex several years ago and never looked back. The quality is unmatched!
Based on YOU, I got a DIP knob for my 457. You are correct; the stock knob is Threadlocked in. I could not break it loose. I heated the knob,over the kitchen stove (gas on low, 3 minutes). Using that GREAT PARALLEL-JAWS tool, it broke ‘loose.” It was then worthwhile to clean the threads on the stem, in order to thread the new bolt on without gorilla torque.
Looks like a big improvement! For those who, like me, use a palm stroke on the knob in both directions, the ""pitted olive" style of the OEM knob is pretty harsh. Until the cavity is filled with a bit of steel rod topped off with just the right amount of JB weld, that is . . .
Short but excellent video!
Thanks, just installed mine.
Thanks for posting the dip products bolt knob. I would like one but thay are all out. Can you comment on the cz 457 by area 419 finger grove bolt knob. I am kind of going back and forth on which is better.
can you add the knob and still be legal for factory outdoor division in ARA bench rest matched
Thank you great video! Does anyone happen to know the standard thread size for the 457 ? I have a spare badger ordinance oversized bolt knob
5-16x24 thread size I would be interested in putting on it. Thanks again for the great video.
Should be metric M6-1.0
Define the thread.
No idea
I've had a hell of a time breaking my old knob free....any advice anyone. Already tried a vice in-between two pieces of wood
That’s pretty much what I had to do.
What is your stock? Thx
It's the factory Boyds stocks on this version.
What scope rings did you put on your rifle for your Athlon?
I believe they were Vortex PMS rings in .97"
Порожняк.