One thing I noticed is that the original sealant was applied “inside” the bolt holes, and on at least one occasion your sealant was applied “outside” a bolt hole. That would matter if the bolt hole was open at the end of the threads, as oil would migrate past the threads and cause a leak. Also, this valve cover is also the upper camshafts bearing caps, so a definite tightening sequence and torque spec would have to be followed. Finally, that’s a LOT of sealant applied that could get into the camshaft bearing bores and possibly plug bearing feed and return holes.
Such a easy job for you over there. England mechanics are… i am thinking to go in Germany to fix the rocker cover gaskets, my one is a facelift cgi. Thank you for the video.
@@KITS_Auto_and_Truck_Repair I have a problem with my 2011 E350 and the display screen. The screen is black but the radio and CD player work fine. I added the apple radio you talked about in your video. Sure enough the display shows up and everything seems to be working except the control knob. The knob won't do anything. I have replaced the head unit, the screen and the knob itself. Still nothing. Any Idea what's my problem?
Hey I was watching your video to see if I actually needed my valve cover gasket to be changed. I have no external leaks but I am having oil only on the spark plug threads. Everything above the threads is dry. From watching your video it looks like the spark plugs screw in much lower down than the valve cover gasket so does it sound like my issue is valve cover gasket related or deeper into the engine?
Great work... How long we need wait for sealant to cure before start the engine and drive? Also where you located as I would like for you to work on my 09 e350. I'm in Socal area
1:30 Are you sure that this is from the valve cover gasket? I had in the front end also quiet a bit "oily gunk", but not that much like this one. It came from the oil fill cap which was broken on mine at a corner and therefore spilled over time oil through that opening.
Thanks for the nice video, it will be helped to do the job prefect, it's a first time I gonna repair Mercedes ML350. Loads of love, keep doing the videos ❤
Not too tough just tedious it seems. How did you know the valve cover needed to be replaced? I lose oil after a few months but have no idea where its coming from... sometimes after a long drive I just see random spots of oil on the engine cover. Is this also a good time to check the condition of the timing chain? Also I wish you woulda known how you cleaned it i'm terrible at that stuff. Did you put paper towels anywhere so the material didn't get into the engine? Also what kind of sealant did you use?
Adam A I didn't replace the valve cover, I cleaned it then I put new sealant on it, I got that sealant from My local Mercedes Dealership! you around the engine and you should see where the leak is coming from!
@@KITS_Auto_and_Truck_Repair Hey man was also wondering on the other side there is a valve cover breather. Did you remove that and reapply the sealant there or you just left it on? Also would you recommend changing the spark plugs while the valve cover is off?
I don’t think you understand how informative this video is. You’ve saved me so much money, thank you‼️‼️✅
@Blawndiiee My Pleasure! I'm glad to hear that
Your knowledge about all this is incredible -Thank you for being here helping us all. We really appreciate you!!!
DinhaS My Pleasure! Thanks
I’ve been watching your videos since for ever love the work you do brother god bless
@Edi-01 Thank you!
One thing I noticed is that the original sealant was applied “inside” the bolt holes, and on at least one occasion your sealant was applied “outside” a bolt hole. That would matter if the bolt hole was open at the end of the threads, as oil would migrate past the threads and cause a leak. Also, this valve cover is also the upper camshafts bearing caps, so a definite tightening sequence and torque spec would have to be followed. Finally, that’s a LOT of sealant applied that could get into the camshaft bearing bores and possibly plug bearing feed and return holes.
@ruthroehm Thanks for your input, the right tightening sequence and torque specs were used here,
Great video, very clear instructions, my SLK 350 has a bit of smoking around the passenger side and I suspect it's the same issue as this video.
@Jason-gy2ux Thank you!
Good job. This video is very helpful too solve the car problem of my owne car💪💪💪 thanks for this.
Tim ter Braake My Pleasure!!
Nice job. I like your videos.
Butch Young Thank you!
Thank you Sr, You're the Man....
@odjocledjo My Pleasure!
Thanks for the lovely video it will help me to fix properly ❤
@sureshpatil4028 My Pleasure!!
Such a easy job for you over there. England mechanics are… i am thinking to go in Germany to fix the rocker cover gaskets, my one is a facelift cgi. Thank you for the video.
Ion Nedel My Pleasure!
very cood video you are the best
DIMISRAMBO DIMISRAMBO Thank you!
Good video nice quality!!..good information 🤝🏾
@reco377 Thank you!
Do you do a lot of work on this model. I followed your procedure to the tee and I am all good. Thanks!! I have another question about this vehicle.
@milkchocolate3622 Yes!
@@KITS_Auto_and_Truck_Repair I have a problem with my 2011 E350 and the display screen. The screen is black but the radio and CD player work fine. I added the apple radio you talked about in your video. Sure enough the display shows up and everything seems to be working except the control knob. The knob won't do anything. I have replaced the head unit, the screen and the knob itself. Still nothing. Any Idea what's my problem?
Hey I was watching your video to see if I actually needed my valve cover gasket to be changed. I have no external leaks but I am having oil only on the spark plug threads. Everything above the threads is dry. From watching your video it looks like the spark plugs screw in much lower down than the valve cover gasket so does it sound like my issue is valve cover gasket related or deeper into the engine?
@Dnasty1 you should reseal the valve cover first and see what happens!
Great work... How long we need wait for sealant to cure before start the engine and drive? Also where you located as I would like for you to work on my 09 e350. I'm in Socal area
Y J Thanks! about 10 minutes, I'm located in Dickerson MD, You can email me at Deo@calleva.org for shop info!
awesome video!
@Gpadellaro Thank you!
Per mecedes: 12nm + 90° for the valve cover bolts.
@224rebels Good!
Thank you for the video brother! Liked and subscribed!
CAMs My Pleasure! and welcome to our youtube community!
1:30
Are you sure that this is from the valve cover gasket?
I had in the front end also quiet a bit "oily gunk", but not that much like this one.
It came from the oil fill cap which was broken on mine at a corner and therefore spilled over time oil through that opening.
@King-gq5qn yes!
Cool video bro thanks
@davidfelix9931 My Pleasure!
What's the RTV Sealant used as gasket maker? It doesn't look like grey ht/high strength silicon, which is not the optimal stuff for the job anyhow...
@nickkolev2507 That's the OEM silicome Mercedes uses!
Thanks for sharing, it is a great video. Quick question, what kind of silicone do you use? I guess cleaning is big part of the job. Thanks again
@Opiti72 My Pleasure! I used a silicone that MB uses, you can get it from your local Mercedes Benz Dealer!
@@KITS_Auto_and_Truck_Repair Great, thank you!!
@@Opiti72 My Pleasure!
Thanks for the nice video, it will be helped to do the job prefect, it's a first time I gonna repair Mercedes ML350. Loads of love, keep doing the videos ❤
Thank you buddy.
@dadelives1 My Pleasure!
How long did it take you to do both valve covers and do both side have the centrifuge gaskets to replace?
@charlesstpierre8 only one side has the centrifuge! about 3 hours for both covers!
Great video Sir.what about Gle 350 value cover gasket made from silicone or robber ? Thanks
GAoutdoor My Pleasure! Some Mercedes have valve cover gaskets and some don't!
I have a 2008 e350 with oil leak from valve cover I want to do it myself but I wonder how much this job typically cost?????
Chris Larabee you could do it yourself if you have the right tools, it's not too hard, Email me at Deo@calleva.org and I will send you a quote!
Do I have to remove fuel pump relay before I press in the end of the Schrader valve to remove the gas line
@groovyruben7776 why do you want to disconnect the fuel line?
Does this leak makes the vehicles run rough or decrease the engine performance?
@bxtbill No!
Not sure of this was asked alrdy, but what silicone did u use and what did u use to clean the cover?
@shadeypop I used tthe Mercedes OEM silicone, I used parts Cleaner to clean the surfaces
Always start youre tork in the middle and work youre way out
@mule666 Thanks for your input!
Does the 2006 4matic c280 have the same engine v6?
@brianbowen8796 it should be similar!
I can’t find that centrifuge part where do I get it from?
Marquision Revels You can get it from your local Mercedes Dealer!
@@KITS_Auto_and_Truck_Repair is there 2 one on each side like a left and a right one and do they have replaceable gaskets ? Thanks
Not too tough just tedious it seems. How did you know the valve cover needed to be replaced? I lose oil after a few months but have no idea where its coming from... sometimes after a long drive I just see random spots of oil on the engine cover. Is this also a good time to check the condition of the timing chain? Also I wish you woulda known how you cleaned it i'm terrible at that stuff. Did you put paper towels anywhere so the material didn't get into the engine? Also what kind of sealant did you use?
Adam A I didn't replace the valve cover, I cleaned it then I put new sealant on it, I got that sealant from My local Mercedes Dealership! you around the engine and you should see where the leak is coming from!
@@KITS_Auto_and_Truck_Repair yes I meant I wish you would have “shown” the cleaning process. But great vid thanks.
@@Dnasty1 Ah ok! Thanks
@@KITS_Auto_and_Truck_Repair Hey man was also wondering on the other side there is a valve cover breather. Did you remove that and reapply the sealant there or you just left it on? Also would you recommend changing the spark plugs while the valve cover is off?
@@Dnasty1 I did remove it and sealed it!
Do you know what the torque spec is for the 4 bolts for just the centrifuge cover?
@FolkRoots 120 inch pound!
@@KITS_Auto_and_Truck_Repair for just the centrifuge cap!? I’m not talking about the valve cover.
@@KITS_Auto_and_Truck_Repair That sounds like way too much. I have read 6nm. Can you confirm for me?
Very good
Ivan Peterzell Thank you!
Ur great Mann🫡
@AlvaroHernandez-uv2eb Thank you!
Do you need to drain the oil before doing this job?
@FolkRoots No!
@@KITS_Auto_and_Truck_Repair Thank you!
What silicone did you use on the valve cover
Nehemias G I used a special silicone from Mercedes!
How much does it cost to do all this job?
@Fred-tg5kn Send me an email and I will send you a quote for this job!
I want to no if your Mercedes Benz is smoking what is the problem
Abeze Warmate Micah oil burning smell from under the hood!
Where are the lifters at ? I’m confused
@mauramurillo8010 what lifter!
Hello my friend..
buboy bebing Hello Friend!!
What size socket did you use on those bolts?
@jamaicanbwoy9364 they are star bolts, I believe it was a E35