Great work. Really like watching these wood turning videos. Special thanks to you for putting graphics on the screen of what gouge, scraper, or other tool you’re using. Not many of the video makers do that and it really helps someone who doesn’t do this to know more about the process.
Beautiful bowl, the person that glued it up also did an incredible job! I’ve never seen the technique of just putting it into the head & tail stock without any thing to grip it??? Unusual but you are obviously very experienced and didn’t push it. Love the finished project, congrats! Cheers, Sean
Thanks Sean! I was worried about mounting it like that, but it worked out... took it slow and stayed out of the line of fire:) Roger from my turning club is famous in these parts for his glue ups, I always bid on his stuff when he brings them in! Thanks for watching!
When i saw how you were holding the work on the lathe,i said no way he will make it...but you proved me wrong:) Excellent skills.. All the best Ioannis
Hello my friend! thanks for watching. I should be starting on the vacuum chuck video shortly, I LOVE turning on that thing (now that I trust it a little).
I'm already curious when you show off how you've built your vacuum device - I do not know if I'll need such a thing, but to me it's always interesting how someone makes something - because everyone makes it a little different in their way and the inequality is a nice condiment in life.
Thanks for the video. This video clearer on what needs to be done in comparison to others on CZcams. When I tried turning a three sided bowl, I turned the wood up to the first set of three corners (if that makes any sense) of the cube’s diagonal. That was a mistake! I should have gone to the second set of three corners so the edge of the wing would be oriented in the right direction and face inwards. My edges faced outwards. Oh well, at least I learned through my mistakes....as everyone else who turns wood..
Three sided bowls are a challenge to turn. They are not easy to turn and can be pretty tricky. I am now on my 5th try turning a bowl and all of the previous four attempts were fiascos. They ended up in the fireplace since they were beyond repair after bad some catches. I studied your video and perhaps I will have some success this time. Thanks for sharing the video! Nice bowl you turned!!!!!
Maple-Crossing Woodworks I am turning a three winged bowl out of a 3.5” x 3.5” x 3.5” cherry wood blank using carbide tools instead of conventional turning chisels. It’s a tiny bowl, but I work with what I have in the wood pile. Will make a 6” x 6” x 6” glue up blank out of some pine with some other wood to make it a little more interesting.
This is the 2nd 3 corner bowl I've seen done on CZcams, by far the best. Just a thought, wouldn't it be advantages to trim a small bit from what would become the foot & the top half minus a little to eliminate waste and work (time) ? I would be interested in your thoughts. Thanks for the great video, Jim
I'm curious, would it be possible to create a jig to cut off the top on a band saw or something, instead of using the lathe? That could allow you to screw a chuck in so you could finish the backside and maybe even create a (I forget what it's called) negative space for the chuck to grab. Hey, you might even be able to turn a tiny bowl from the the point cut from the top. Just an idea. No idea if it would work. Awesome project. Though it is long, I love seeing every step of the process in detail.
You absolutely could. if you built a jig to hold the bowl aligned with a bandsaw blade you could probably get a pretty good cut, then just attach to a faceplate or work-screw. The only challenge might be to keep it aligned with the corners so the tops of the bowl are uniform. Thanks for watching, I appreciate the ideas!
A Powermatic, I think. Don't know what model though. Wouldn't mind one myself. Plenty of swing and ample power to spin bigger stuff. Are you looking to get one? Best regards. 🙃
You ended up with a very nice looking dish, I got a bit wor4ried when you were making the finishing cuts to the bottom. You got lucky, I didn't care a lot for the way you were removing the tenon. No worries though, it all worked out.
thank you very much for your answer unfortunatly no way to have it in my country i apreciate very much your work and i'm learning many trick from you thanks you so much
Absolutely amazing. It looks great.
Beautifully visualized and realized through your craftsmanship.
Thank you!
Outstanding! Your skills are nothing short of inspiring! What a beautiful bowl.
Thank you, very much!
That's an amazing transformation from one shape to another. Love the final product!
Love it, thanks for sharing this Carl👍
Fine Art in the making! Thanks for sharing this wonderful video.
Thank you, and thanks for watching
It is an awesome bowl I love it. Thank you for showing it to us.
Thank you for watching!
So cool how that came out. great piece
What a beautiful piece, and it was fascinating watching you bring it to life.
Thank you!
Beautiful project. Really came out well and the polished finish is amazing! I'll have to try it for sure.
Beautiful project and a great work. It was fun watching you. Greetings from Andy from Germany
Very cool, I love the pattern it created.
Thanks Carl! I wasn't quite sure what it would make, but very pleased.
Carl Jacobson qqq
Fascinating from start to finish. You're very talented. Glad I found your channel.
Thanks! I appreciate you visiting!
Elegant, what more can I say? Well done.
Thank you!
Wow, that turned out gorgeous! Great work.
Thank you, it was a really fun project!
Very, very nice! Your skills are fantastic and make watching the video super enjoyable.
Thank you, and thanks for watching!
Patrick A. McKinley
Patrick, you wouldn't be the same Patrick McKinley that lived in Hialeah, Florida on 111th terrace would you ?
Very enjoyable project - excellent skill and a superb finished product - thanks.
Thank you!
"And because this is my favorite tool" - wise words from a man who knows what he is doing. Beautiful bowl.
Thanks Nick, and thanks for stopping by my channel!
Excellent, I love it.
Thanks
James
Blow away Very nice. I'm 81 and turn my first project yesterday, sorry I didn't start a long time ago. Thank you for the video.
Thanks for watching! never too old to learn!
Thanks, great demo of different techniques, “ turned out” beautiful. Thanks Chuck
Glad you enjoyed it, thanks for watching!
Beautiful job turning and finishing your bowl. The glued up block really makes this piece unique.
Very nice piece compliments!
Thank you
Beautiful bowl! I LOVE winged bowls and 3 sided bowls, especially if they are glued up with contrasting colored woods. Thanks for sharing!! 👍🏾
That’s really cool! Nice work!
That is such an awesome bowl...love it! I just turned a square bowl from purple heart today.
Thank you! it was a blast to turn, once I felt like I trusted the mounting. A square bowl from purple heart, I'd love to see that!
Great work. Really like watching these wood turning videos. Special thanks to you for putting graphics on the screen of what gouge, scraper, or other tool you’re using. Not many of the video makers do that and it really helps someone who doesn’t do this to know more about the process.
I'm very glad you enjoyed it! Thanks for watching
Beautiful bowl, the person that glued it up also did an incredible job! I’ve never seen the technique of just putting it into the head & tail stock without any thing to grip it??? Unusual but you are obviously very experienced and didn’t push it. Love the finished project, congrats! Cheers, Sean
Thanks Sean! I was worried about mounting it like that, but it worked out... took it slow and stayed out of the line of fire:) Roger from my turning club is famous in these parts for his glue ups, I always bid on his stuff when he brings them in! Thanks for watching!
Beautiful. Greetings from White Plains, NY. Nice calm voice.
Thank you! and welcome :)
Holy cow! That is gorgeous!
Thank you!
Beautiful bowl, really enjoyed whatching you make it
Thank you, and thanks for watching!
I really love this.
The 3 corner bowel nice choice 👌 👍 thanks for sharing
awesome nice work. maybe in my younger day I would be gutsy enough to turn that
Muy buen trabajo MAESTRO.
Stunning work
pretty impressive, first time i see a tri-corner bowl turned 😎👍
Thanks for watchin!
at first i thought, it would knock the cube off =D
Mad9977 Productions wheel
Nice job Love the end results
thanks
Very nice! Putting it on my bucket list!
excellent! I'd love to see the final product!
Very, very nice! Congrats.
Thank you!
Very nice turning. Careful nibbling did the job.
Thank you. Lots of air getting cut there, but a fun project
That’s a very unusual bowl. Well done 👏👏👏
Thank you very much!
This is very beautiful.
Thank you!
When i saw how you were holding the work on the lathe,i said no way he will make it...but you proved me wrong:) Excellent skills..
All the best
Ioannis
Thanks! I was dubious at first as well... but, having the right live center helps!
hi - works well your home-made vacuum connection - and again a very good idea the triangular bowl - greeting from federl.
Hello my friend! thanks for watching. I should be starting on the vacuum chuck video shortly, I LOVE turning on that thing (now that I trust it a little).
I'm already curious when you show off how you've built your vacuum device - I do not know if I'll need such a thing, but to me it's always interesting how someone makes something - because everyone makes it a little different in their way and the inequality is a nice condiment in life.
Very nicely done!
Thanks!
Very nice work. Greatings from Germany
Thanks, and greetings from the US
Now that is a beautiful bowl
Thank you, it was really fun to make too :)
looks awesome
Thank you!
Very beautiful...love the pattern!!!
Thank you!
You are so welcome
Daniel vlariño
Thanks for the video. This video clearer on what needs to be done in comparison to others on CZcams.
When I tried turning a three sided bowl, I turned the wood up to the first set of three corners (if that makes any sense) of the cube’s diagonal. That was a mistake! I should have gone to the second set of three corners so the edge of the wing would be oriented in the right direction and face inwards. My edges faced outwards. Oh well, at least I learned through my mistakes....as everyone else who turns wood..
Very very cool... Really nice.
Excellent bowl👍👍👍👍👍
Thank you!
Awesome!
Hermoso trabajo amigo.
muchas gracias amigo
Beautiful !
thanks!
Nice thanks for posting.
Thanks for watching!
Beautiful bowl,
Thank you
First rate in all ways. Creative planning paid off with a unique pattern. KUDOS
Thank you!
Хорошая работа.👍
Beautiful
Thank you!
Very nice. I use a mover's blanket between the lath bed and the work piece when using this polishing system. Noted slight catch at about 26:40.
That's a really good idea, I've had bottle stoppers ripped from my hand and smashed against the back wall. Thanks for watching!
Very beautiful! Parabéns!
Thank you!
Very interesting.
Nice looking Tri bowl
Thank you!
Very nice work.
Thank you
Very nice bowl
Thanks!
Beyond cool!
Superb! Bravo. 👍👍
Three sided bowls are a challenge to turn. They are not easy to turn and can be pretty tricky. I am now on my 5th try turning a bowl and all of the previous four attempts were fiascos. They ended up in the fireplace since they were beyond repair after bad some catches.
I studied your video and perhaps I will have some success this time. Thanks for sharing the video! Nice bowl you turned!!!!!
Good luck, I hope this helps. I'd love to see what you come up with!
Maple-Crossing Woodworks
I am turning a three winged bowl out of a 3.5” x 3.5” x 3.5” cherry wood blank using carbide tools instead of conventional turning chisels. It’s a tiny bowl, but I work with what I have in the wood pile. Will make a 6” x 6” x 6” glue up blank out of some pine with some other wood to make it a little more interesting.
Very nice!
Thank you!
@@MapleCrossingWoodworks good
excellent
real nice job
Thank you!
ah another golf glove aficionado, I use one as well!
I've become a huge fan of them, especially doing square bowls/plates lately!
I personally use a fairly heavy leather glove with the last knuckle of each finger exposed. (a la David Ellsworth.)
Nice one
really good job /nice one / creative /I love it /...................!
Thanks! and thanks for watching!
a very good work
Thank you!
bravo 👏👏
Fantastic....
Thanks!
Very good video, well explained. Were you surprised by the shape of the pattern inside, I wasn't expecting that ... as the song goes!
I wasn't really sure what to expect... but I was very pleased with what emerged :)
Wow. Beautiful. What type of woods is this made of?
very nice!
Thank you!
This is the 2nd 3 corner bowl I've seen done on CZcams, by far the best.
Just a thought, wouldn't it be advantages to trim a small bit from what would become the foot & the top half minus a little to eliminate waste and work (time) ? I would be interested in your thoughts.
Thanks for the great video, Jim
I've thought about using some of the hollow to make a lid for it, maybe on one of my next ones. Thanks for watching!
Wow, that’s a lot of air to turn!
Most definitely! Fun project though. Thanks for watching!
Very cool.
Thanks
Precioso.
I'm curious, would it be possible to create a jig to cut off the top on a band saw or something, instead of using the lathe? That could allow you to screw a chuck in so you could finish the backside and maybe even create a (I forget what it's called) negative space for the chuck to grab. Hey, you might even be able to turn a tiny bowl from the the point cut from the top. Just an idea. No idea if it would work.
Awesome project. Though it is long, I love seeing every step of the process in detail.
You absolutely could. if you built a jig to hold the bowl aligned with a bandsaw blade you could probably get a pretty good cut, then just attach to a faceplate or work-screw. The only challenge might be to keep it aligned with the corners so the tops of the bowl are uniform. Thanks for watching, I appreciate the ideas!
That is pretty.
Thanks
Parabéns, muito bonito.
Thank you
the OCD in me really wanted you to keep turning it to the camera until the corners lined up lol
Amazing, thanks for sharing! What is the brand and model of your lathe?
A Powermatic, I think. Don't know what model though. Wouldn't mind one myself. Plenty of swing and ample power to spin bigger stuff. Are you looking to get one? Best regards. 🙃
Great work. I'm going to try turning a mortise at base so that I can use a std 4-jaw chuck to finish interior.
would love to see the results! Thanks for watching
You ended up with a very nice looking dish, I got a bit wor4ried when you were making the finishing cuts to the bottom. You got lucky, I didn't care a lot for the way you were removing the tenon. No worries though, it all worked out.
Was that because of the pull cuts, or the vacuum chuck? Thanks for watching!
Len Mullin Sorry 😐 I offended you by wanting to see the glue up. Mine always seems a little off. Please read my reply under my first post.
beautiful job! i think some more editing in the middle where you were changing the chuck to turn the bowl and finish the bottom would have been nice.
please can you tell me wich type of gouge you're using
That is a 1/2" Thompson bowl gouge (U flute) with an Irish grind on it.
thank you very much for your answer unfortunatly no way to have it in my country i apreciate very much your work and i'm learning many trick from you thanks you so much
I loved every minute but I must have missed the point
What keeps bowl on fixture when turning the base
He uses a vacuum chuck so it's basically being sucked onto the headstock by an industrial Hoover.
very nice
Thanks!
Wunderschönen 👍♥️
Danken
Хочу такую красоту 🤗🤗🤗
great, where to buy?