Installing K tuned Engine harness on my K24!
Vložit
- čas přidán 25. 08. 2019
- Thank you for tuning in! I wanna hear you’re thoughts, comment below and tell me what you think! Like, comment, subscribe and give the video a thumbs up it would be greatly appreciated!
Follow my social media:
Instagram: @spvce___
Twitter: @spvce___
#cars #jdm #function #form #stance #vlog #unboxing #car #carparts #static #speed #fast #f22 #f23 #j30 #j32 #j35 #k24 #k20 #b18 #b20 #b16 #dseries #bseries #hseries #fseries #kseries #jseries #carshows #shows #budget - Auta a dopravní prostředky
This helped me with my k swap harness not k tuned but watching the plug in. Thank you.
"Shift" plug is for reverse lock out solenoid. Only needed if you are running 6 speed transmission.
i just noticed this was on a 94-97 accord. needed this for my 93
Can wait to see that car running!!!👍🏽👍🏽👍🏽
Nelson Jimenez coming soon brother thank you for watching this build unfold a video at a time 🙏🏼
Thank now I'm do my k24 tomorrow 🙌
What belt are you using? I want to run the a/c but delete power steering.
I am at the same point as you are but I would like to see the installation in the changes that have to be done oh you also have the harness ktuned inside because there I am standing there to see the process of the cable changes inside 🙏🏽💯 I am waiting for that part
LiddoSwaqqer ‘ i made both parts already brother one conversion harness video and this engine harness video, the only changes i had to do were my knock sensor, get rdx injectors and get a 02-04 rsx crank position sensor
oh I did not know I am doing 99-00 civic k20 and install the harnees but inside I have original they sent me the diagram more or less I know that I must connect I just wanted to see not to be mistaken because my fuel pump does not enter and the fan is not either which are some cables that I have to change but I wanted to be 100% sure of what I was going to move and change
What oil pressure sensor and coolant temp sensor are you using? I noticed there 1 wire connector...?
How did you wire up your speed sensor
Hows the ktuned wire harness kit holding up any problems ???
That alternator is not a ground lol it goes to the fuse box
the only part i didnt like was no solder on the knock sensor plug, trash the electrical tape and use heat shrink
shawn gavigan well noted brother thank you
nice video im stuck btwn gtt the ktuned wir harness and the wireworx for my k24. so many diff people say keep it oem wire..but idk?any opinion on the 2companys
QUEENS_RACES rywire makes a great product they have great customer service and can even help you trouble shoot your wiring if you are having problems over the phone, i got a k-tuned which is a tucked replica of the oem harness only issue i have is the coolant temp sensor to read the gauge
@@space3748 ty bro i appreciate the info. i just hit up kseries and they mention rywire also . most like gonna ge that 1 ty for the info
No problem brother glad i was able to help out 🙏🏼
you said map while hooking up the plug to the tps and tps when you hooked up the map.....id check those just to make sure
Matthew Hawkinson will definitely check that out next time im working on the car thank you 🙏🏼
@@space3748 no problem!
if you look at the video you can see he plugged them in correctly
I have a problem where my ecu is not turning on. everything is connected my sub harness and my engine harness all connected but my ecu still doesn’t turn on.
You have to add a ground to your main relay under your dash. You’ll see on your main relay there are two black wires in a pin. Add a wire into it and ground it somewhere. Boom your fuel pump relay should prime, check engine light should work and your ECU should turn on.
Did you swap the crank sensor or the plug on the harness?
Irvin Dorsey i swapped the k24 one to a k20 type s crank position sensor
Is the factory k24 harness not compatible with the rywire conversion harness? Going to pick up my k24a2 this week. Trying to figure out all my wiring... before i start droppin hundos on shit I dont need. lol Still searching for a damn trans -.- And it looks like that k tuned harness is going to be another like 800 or so... but if its what she needs. its what she needs...
To make a long story short no brother lol, all sub harness are made for k20a2 6 speed engine harness. You dont have to drop 800 like i did, i wanted this look, do some shopping online and figure out who is cheaper and i think its rywire.
@@space3748 Picking up engine Tomorrow!!!!!!! So pumped!!! Can't find a 6 speed no where tho.... so pretty sure I'm going to run the same trans as you but add lsd.
What harness are you using beside the k-tune harness?
Mike’s Expierience im using a Ry-Wire conversion harness
@@space3748 Thanks bro🙏🏼
Why not swap knock sensor to a k20 sensor so u won’t cut it
Kseriespaisas tbh no real reason i just found it fitting using a k24 sensor that i had instead of spending on a new one
waiting for my ktuned harness to show up...hope it works well.
Abstrahere De Vanitate it will brother, just remember what i said in the video and you will be golden
Space did you get the one with the power wire or no power wire?
Abstrahere De Vanitate with power wire
Space I realized yesterday that i ordered the one without it on accident... I sent them a message right away to see if it was shipped yet and if I could exchange it... it’s my 3rd k swap eg, but I never did the wiring before and this time i have no help! Lol
Abstrahere De Vanitate honestly its no different i think, its like a built in charge harness kind of
vid got TPS and MAP plugs reverse~~
Law C yea i realized that the day i did it, following video i corrected it thanks man
What’s wrong with butt connectors? I hate those electric tape wire jobs
kamereno nothing is wrong with it tbh, i did my wiring that way in case i have to check for shortages etc just so i dont have to short the wire to take the butt connectors off, in theory its better to do butt connectors because its constant connection so you are not wrong
Space I prefer to solder but it’s on you if you don’t care about good connection it’s only a 12v system. But for me butt connected at least. Electrical tape jobs like that are ghetto although works for temporary.
U gott have 6 speed transmission to use that plug
The shft? I ask cause I have the same confusion about it
Bien echo
Is this the budget harness?
South StocKton no this is the K-Tuned harness the budget harness is from rywire if im not mistaken
Space oh I see. You’re not running a alternator relocate correct?
Space and also what year tranny was u using? I heard 04 and 06 is a bit diff cause speed sensor
South StocKton i am bro i just made my own charge harness, im using a 05 , 5 speed accord transmission if you are doing a k swap in a accord and using hasport mounts you cant use a rsx transmission on a itr, accord and tsx trans
Space I see. Wen is this car going for a tune? Lol
What tranny you running?
bro twisting wires and taping them is fucked!!!! lmao atleast heat shrink it so it cant move as easy
Whats the part number on that lower hose? I seen that the upper one was 9968 napa# im not trying to spend 200 bucks on silicone hoses 🥲
Still need a pn? I have one for a stock civic radiator i'll get it if you need
@@nolanritter641 im oky now i bought some other hoses and made it work thanks 🤝