I have a 2022 AT4.A couple weeks ago had new tires and a 1.75 Rough Country level kit installed.Went with a 295/70R/18 tire with no trimming whatsoever.I did take off the mudflaps and in their place I had a kickback styled mudflap installed so as to protect my rocker panels from stone chipping and overspray from the tires on wet roads.There seemed to be this sweet spot where a person could either go with the taller tire and a hair skinnier like what you did or go for the hair wider and a hair less in height.I’d say overall GM designs a very appealing and stylish body design but coming from a 2018 GMC All Terrain where the wheel well had more allowance and I could fit in a true 35x12.50 tire,this new wheel well certainly posed some challenges when it came to researching and doing my homework for fitment without rubbing.Will be interesting to see if when GM redesigns their next generation of trucks if they keep the squared wheel well design or go to something that embraces more wiggle room for larger tires.
Beautiful new truck! Love that color. I have a 2021 GMC Sierra AT4 (6.2L) with 295/70 R18 tires (34.3" x 11.5" wide) with offset 0 wheels (.9" poke out to clear that upper A arm). I did have to do some trimming and also am running Bilstein front adjustable struts for an additional 1.4" of leveling. Zero rubbing. I got some vids on my channel if you wanna look-see.
I recommend you still do a mud flap delete. You're going to have rubbing regardless. Plus if you intend to have a 1 inch poke... that rubbing will be more apparent.
I have a 2022 gmc Sierra (not at4) with a 2 inch level. I currently run a 20x10 -19 with 295/55/20 (33x11.5) tires stick out about 3 inches from the fender well, and have zero rubbing after modification AND I have kick back flaps on it.
need some advice on this, bought some nitto 35-12.5-r20s for a at4 carbon pro, with a level kit be enough? or do i need that and spacers? if so, will 1 1/2" be enough? thanks for the reply
Great video man. I have a 2023 Silverado Custom with a 2" leveling kit. Currently have stock 275/55R20 tires. Thoughts on what you think the largest A/Ts I could run?
Hey, bro. I'm looking for a bed mat for my Sierra AT4X. Apparently, the carbon pro bed is different from stock, so nothing seems to fit. U find anything?
Running same truck with the Peak Suspension 2.25" inch front kit with another 1" on the rear. Going to stay with the stock wheels, I wanted to run a 295/70-18 BFG KM3. Specs on that tire are 34.3 Dia and 11.8 wide. Do you think if I do the minor trimming I can run an 11.8 wide tire? I will be running dirt king uca's.
@@NickDedic the tires will absolutely fit if your good with the trimming, you would do less than I had to. Only thing I would be concerned about is rubbing the uca with the wider tire on stock wheels. I barely had 1/4” with the stock uca and after market definitely are more than 1/4” bigger
Help me understand if you will If i were to put the 285/75.18 on, just how much trimming is going to be required if nothing is done to llft the truck using the same wheels? i hear you say a little can you be specific? I don't buy somthing and then have a real headache. ;) Thanks!
Using stock wheels you will have to do some trimming on the wheel well liner and the mud flap. I would say probably up to an inch of the inside of the mud flap. Liner I cannot remember how much I cut off of it for stock wheels but it wasn't dramatic
thank you for the vid brother. Love the truck! I have the same truck but in white. i hate the how small the stock tires look on it. I wonder if having the leveling kit from Rough country will help not rub without trimming.
Eh with this size, you'd definitely still have to do some trimming. If I'm pulling into my daughter's school too quick, it'll still rub pretty good. By too quick I mean faster than a turtle lol
I have a 2018 Gmc Sierra with the stock 285/45/22. I put a 3 inch strut spacer up front just to level it out. Anyone know what size tire I can get up too? I don't mind some cutting and adjusting.
I'm happy with what I got. I actually was going to wait and get a 23 until I saw they were switching to that bumper. I like the bigger front end look with my bumper plus wouldn't be happy paying that much more for a bumper n inch taller tires
I have a 2024 Elevation off road edition. May I ask what 2" level did you go with and why not a lift? I am new to this and only wanted a beefier look not too extreme.
Hey man...I've got a '23 AT4X on order and looking to add 1.5" spacers. Do you think I could run 35's with everything being stock except for the spacers?
Not without cutting a lot and still rubbing with pushing them out that far. Even with a level you'd still have to trim the steel mud flap mount unless you go with a skinny 35in tall tire. Then possibly
Maybe I stick with 34s instead. I really like the stock rims, so don't see a need to change them, but I would prefer to push them out a bit. Perhaps 34s with the 1.5" spacers and a 1.5" front level will do the trick.
I don’t get these comments? A “professional” shop damages his rims and you have an issue with him holding them accountable. Why would he accept the fact that the rims arrived at the shop defect free, when they completed their work the rims had been damaged. Crazy.
@@WICKEDAUTO1 look it up its close to a 35 just a little less. I have actual 35x12.5x20. They equal to 35.03x12.5. Not arguing just telling the straight facts. Oh and btw i worked in a tire shop for 3 years. But you're right you can fit a 35x12.5x20 on them with a level.
@@WICKEDAUTO1 Strait from NIttos website... Actual tire sizes measured... - Nitto trail grappler measures out at a true 33.79 “ tall for the 285/75/18 And 33.28” tall for the 295/70/18
@@deanweller5789 so I have the ridge grappler smart ass, copied from the site… Inflated Dimensions - Overall Dia (in): 35.08 Inflated Dimensions - Overall Width (in): 11.26 Anything else dumb ass?
“Just an inch of poke.” My wife every other Tuesday night.
I have a 2022 AT4.A couple weeks ago had new tires and a 1.75 Rough Country level kit installed.Went with a 295/70R/18 tire with no trimming whatsoever.I did take off the mudflaps and in their place I had a kickback styled mudflap installed so as to protect my rocker panels from stone chipping and overspray from the tires on wet roads.There seemed to be this sweet spot where a person could either go with the taller tire and a hair skinnier like what you did or go for the hair wider and a hair less in height.I’d say overall GM designs a very appealing and stylish body design but coming from a 2018 GMC All Terrain where the wheel well had more allowance and I could fit in a true 35x12.50 tire,this new wheel well certainly posed some challenges when it came to researching and doing my homework for fitment without rubbing.Will be interesting to see if when GM redesigns their next generation of trucks if they keep the squared wheel well design or go to something that embraces more wiggle room for larger tires.
curious what kick back mudflap you installed?
Beautiful new truck! Love that color. I have a 2021 GMC Sierra AT4 (6.2L) with 295/70 R18 tires (34.3" x 11.5" wide) with offset 0 wheels (.9" poke out to clear that upper A arm). I did have to do some trimming and also am running Bilstein front adjustable struts for an additional 1.4" of leveling. Zero rubbing. I got some vids on my channel if you wanna look-see.
No one cares literally
What brand of tire did you go with?
I recommend you still do a mud flap delete. You're going to have rubbing regardless. Plus if you intend to have a 1 inch poke... that rubbing will be more apparent.
I have a 2022 gmc Sierra (not at4) with a 2 inch level.
I currently run a 20x10 -19 with 295/55/20 (33x11.5) tires stick out about 3 inches from the fender well, and have zero rubbing after modification AND I have kick back flaps on it.
Any photos of your setup? And so I understand, you have a 2 inch level and run that setup with no rubbing and did not have to trim?
Stock rims AT4 considering the 295/70/R18 nitto recons, dueler AT or some other AT tire to keep that aggressive look but quieter than the duratracs.
Rough country has the front and rear mud flap delete for around $75
. They worked great
I have a 2021 Sierra AT4. Do you know if 285/65/20 will rub? I am getting conflicting information online and from the tire center.
At4 and at4X come from factory with a 2 inch. We want to know stock stock
Depends what tire shop you went to but you get what you pay for a lot of times
What are the window guards that you have on your truck? What set up?
So now that you have had the automatic steps and gm steps what do you like the best?
need some advice on this, bought some nitto 35-12.5-r20s for a at4 carbon pro, with a level kit be enough? or do i need that and spacers? if so, will 1 1/2" be enough? thanks for the reply
Great video man. I have a 2023 Silverado Custom with a 2" leveling kit. Currently have stock 275/55R20 tires. Thoughts on what you think the largest A/Ts I could run?
No trimming at all probably 275/60 would be my best guess. With very little trimming probably 275/65
@@WICKEDAUTO1 Appreciate it. Thanks.
I want my truck to look like this, i have stock 18s and want 35s
2019 silverado
Thanks 🙏 😊😊😊🎉🎉🎉
I have 2020 at4 1500
Wheel 🛞 stock 275/60R/20 115S
I’m looking 👀
New tires 🛞 Falken wildpeak A/T4W 😊😊😊 probably go 265-285/65/20
Can’t we just shimmy up the coil springs? Won’t just lifting it a couple inches give us the clearance we would need to prevent body damage?
Hey, bro. I'm looking for a bed mat for my Sierra AT4X. Apparently, the carbon pro bed is different from stock, so nothing seems to fit.
U find anything?
I actually have not looked, however, if your unable to find anything you could always buy one and just cut the sides down so it fits.
I can"t understand why NO ONE can install tires without f@cking up your wheels.... .??????
Running same truck with the Peak Suspension 2.25" inch front kit with another 1" on the rear. Going to stay with the stock wheels, I wanted to run a 295/70-18 BFG KM3. Specs on that tire are 34.3 Dia and 11.8 wide. Do you think if I do the minor trimming I can run an 11.8 wide tire? I will be running dirt king uca's.
@@NickDedic the tires will absolutely fit if your good with the trimming, you would do less than I had to. Only thing I would be concerned about is rubbing the uca with the wider tire on stock wheels. I barely had 1/4” with the stock uca and after market definitely are more than 1/4” bigger
Help me understand if you will If i were to put the 285/75.18 on, just how much trimming is going to be required if nothing is done to llft the truck using the same wheels? i hear you say a little can you be specific? I don't buy somthing and then have a real headache. ;) Thanks!
Using stock wheels you will have to do some trimming on the wheel well liner and the mud flap. I would say probably up to an inch of the inside of the mud flap. Liner I cannot remember how much I cut off of it for stock wheels but it wasn't dramatic
2020 Trail Boss 285 70 r18 34 by 11.1/2 and 😊 no rubbing Nitto Ridge Grapplers
I went with 295/60R20 Falken Wildpeaks. No rubbing or mods.
Stock suspension and wheels? I am thinking about this size. A guy a work has this size on a non at4 and he says no rub. He is about a 1/4” from uca.
thank you for the vid brother. Love the truck! I have the same truck but in white. i hate the how small the stock tires look on it. I wonder if having the leveling kit from Rough country will help not rub without trimming.
Eh with this size, you'd definitely still have to do some trimming. If I'm pulling into my daughter's school too quick, it'll still rub pretty good. By too quick I mean faster than a turtle lol
I run 20x10 -19 with a 33x11.5 and have zero rubbing with kickback mud flaps after very slight modification to the fender (closest to door)
ZR2 =32
AT4 = 33
This is how it's been from the beginning stock.
Otherwise great video and nice work on the modification!
I have a 2018 Gmc Sierra with the stock 285/45/22. I put a 3 inch strut spacer up front just to level it out. Anyone know what size tire I can get up too? I don't mind some cutting and adjusting.
What are your thoughts on the 2023 Sierra at4x with the new bumper? Are leaning on getting that bumper or happy with what you got ?
I'm happy with what I got. I actually was going to wait and get a 23 until I saw they were switching to that bumper. I like the bigger front end look with my bumper plus wouldn't be happy paying that much more for a bumper n inch taller tires
Im considering getting the 23 bumper unless its really expensive.
I have a 2023 GMC Elevation with a 2 inch Level on the front. What size should will fit my truck for this exact tire? Even if I have to trim a bit
You might be able to fit a 34x11 but not entirely sure
I have a 2024 Elevation off road edition. May I ask what 2" level did you go with and why not a lift? I am new to this and only wanted a beefier look not too extreme.
23 Slt 2in front RC level kit stock tire are 275/60/r20 Factory At tires. Think I would be good going to 275/65 recon grapplers with no scrub?
I would think so yes, it would only add a half inch in clearance wise
Hey man...I've got a '23 AT4X on order and looking to add 1.5" spacers. Do you think I could run 35's with everything being stock except for the spacers?
Not without cutting a lot and still rubbing with pushing them out that far. Even with a level you'd still have to trim the steel mud flap mount unless you go with a skinny 35in tall tire. Then possibly
Maybe I stick with 34s instead. I really like the stock rims, so don't see a need to change them, but I would prefer to push them out a bit. Perhaps 34s with the 1.5" spacers and a 1.5" front level will do the trick.
So 33x12.5 20s will rub on stock wheels will rub on the upper control arm ?
With an aftermarket control arm more than likely
quick question: does it matter bettween 1500 and 2500HD?
Yes, the 2500 sits higher
Do you still have these wheels? Or you sell them already?
Already sold sorry
Would this work on the elevation?
No as the at4. at4x, trail boss, zr2 come lifted two inches already while the other trims do not so you’d need a bigger lift to fit 35s
Doesn't the at4 have a factory 2" lift?
Correct
How’s those Tires ride? Loud or anything?
Omg no, quiet and ride amazing. It’s all I’ve ran going on 6 or 7years now on 4 or 5 vehicles
Thanks think I’m going with those next appreciate the honesty!
Nice video. Give us a followup!
You gonna sell those OEM wheels?
Actually already sold
Thats a 34.8 by 11.2 very close to 35s
That's what it is to be yes, as stated per nitto this tire is 35.08
Yeah it really depends on the brand of the tire. Some are 34.8, others are not
I can't believe you would complain about that little itty bitty chip on the wheels. Such a waste
And then proceed to hack up the truck with a sawzall
If something gets messed up in the truck I want to be the one who did it.. not the fault of no one else..! @wikedauto keep doing your thing..
i think he said he made the tire shop pay for them. I can’t imagine what a pain in the xxx to have dealt with someone like this guy
I don’t get these comments? A “professional” shop damages his rims and you have an issue with him holding them accountable. Why would he accept the fact that the rims arrived at the shop defect free, when they completed their work the rims had been damaged. Crazy.
@davidroberts4897
Same I would not expect a shop to leave any mark anywhere on a vehicle. The one time I had this happen they made sure it was fixed.
34.83x11.22 actually
35.08x11.26 actually....straight from their website on this specific tire. Try again.
@@WICKEDAUTO1 look it up its close to a 35 just a little less. I have actual 35x12.5x20. They equal to 35.03x12.5. Not arguing just telling the straight facts. Oh and btw i worked in a tire shop for 3 years. But you're right you can fit a 35x12.5x20 on them with a level.
34.8 x11.2
35.08x11.26
285's are a 33"
You might want to look it up know it all
@@WICKEDAUTO1 I don't have too, i know tire sizes. 315 is 35" smarty pants!
@@deanweller5789 not going to argue with you troll. Get on the nitto site yourself.
@@WICKEDAUTO1 Strait from NIttos website...
Actual tire sizes measured...
- Nitto trail grappler measures out at a true 33.79 “ tall for the 285/75/18
And 33.28” tall for the 295/70/18
@@deanweller5789 so I have the ridge grappler smart ass, copied from the site…
Inflated Dimensions - Overall Dia (in): 35.08
Inflated Dimensions - Overall Width (in): 11.26
Anything else dumb ass?
Typical tire shop 😅
I got 305/50/20 on mine and no trimming at all
You habe the leveling kit on front to put the tires