MAKING A SUPER MEGALODON | Powerful Nerf Mod
Vložit
- čas přidán 26. 08. 2024
- Justin modifies the Nerf Megalodon into something special.
Patreon: / maketestbattle
Links: ⇩ ⇩ ⇩
Ebay Auction: ebay.us/ZvZITd?...
Drum 3D print: www.thingivers...
Amazon Affiliate links I earn commision from:
Megalodon: amzn.to/32ZqWoN
5min Epoxy w/ mixing nozzle: amzn.to/2NpByqC
17/32 12" Brass: amzn.to/2JAS9GI
10kg spring: amzn.to/36iAYUf
12kg spring: amzn.to/323U0Kt
WORKER barrels: amzn.to/36t8O9c
Facebook: / maketestbattle
Recommended Camera: amzn.to/2zMsJC9
Microphone: amzn.to/2hLDKfF
Music: Kalax - "Vice"
/ kalax-vice-free-download
/ iamkalax
Spent way too much time on this... again. Played around with lighting and I am happy with how it looks.
If you enjoy these Modding videos, Loadouts and Gameplay edits I do please consider supporting me on Patreon.
Patreon: www.patreon.com/maketestbattle
I have got to get me one of these now...
Yesss. Would look sick in the X-strike colours.
But can it take a k26?
The real question is can it take a 25kg camping tracer spring but that doesn't have the same ring to it.
I loved mine at the last war.
Definitely!
TRAIN!
20:38 thank you for syncing the hammer blows to the music that was incredibly satisfying
Agreed. That was very cool, same with the "tickler".
Thanks for noticing. Did the same with the oscillator and mitre saw strokes.
@@MakeTestBattle I didn't notice it on the mitre saw section so I watched it again. I think you're right about the conduit flexing into the fence gap due to it being a sliding mitre saw. Tooth count and tooth geometry can also greatly affect the cut on different materials. A good blade costs more than the entire modded blaster though.
What is thé name of this song
Lastly, thanks for actually modding. It used to be a thing on CZcams. I miss it.
Omg that Captain Xavier cameo was unexpected. Lol. :D
I don't think a picture of him = a cameo.
@@DraconisMarchVII I think it definitely does.
@@CaptainXavier Yeah well, you're biased. lmao definitely more just a "reference."
Rubbish! I was moving and everything. ;P
@@DraconisMarchVII I was in the workshop by myself when it happened. There was blinding light, the room filled with compressed kinetic energy.
I was visited by the spirit of the spring....
Soooo yeah nah yeah, it counts as a cameo mate.
The tinfoil funnel is a great idea; wouldn't have thought of that.
Looks like I need to get one of these bad bois
Thanks Bobo. Yeah it was $2 aud a tube for the epoxy I used but they don't have mixing stems. The ones that did were $8 for a smaller tube. Brain was like what can I use as a sacrificial funnel?
Yeah they are fun.
Amazing stuff. I used this video to build my shotgun megalodon. I linked you in my description. Cheers!
24:00 AR removal synched to the music! Genius! EDIT: My goodness. It's even better second time around and it actually starts at 23:52
Okay, I love how that first use of the oscillator was basically the guitar wail in Immigrant Song.
NAAAAAAAAAAAAAAAAAAAAAHAAH!
I use popsicle sticks for mixing and oral syringes for getting epoxy into small places
Yeah that's another way.
If you're doing a lot of epoxy, pour it into a sandwich bag (or the finger of a rubber glove), close it off, mash it around to mix it, then clip off a corner or tip and squeeze it out like you're decorating a cake
You mad man! I'll try that next time.
@@MakeTestBattle or just use a small liquid syringe, theyre like a dollar at dollar stores m8
Your brain is too wrinkly. Save some wrinkles for the rest of us.
Those are some beautifully consistent shots too, mmmm. Always have dug these mod guides and love to see more.
Halllo
HALLO
This is awesome.
-Rob
Thanks Rob.
You should get a LegoDEI chronograph. Cheapest on the market from one of us California nerfers.
Love the captain xavier reference tbh I happened to stumble across this vid but awsome vid👍
Walcom got me interested in this blaster, but You sold me on it. It's like a smaller capacity Dart Zone Magnum Superdrum, except that you can fire almost whatever you want out of it as long as you got a 3D printer. And it's fairly powerful once modded. Now I just gotta wait for it to go on sale.
Exactly.
$30usd ain't bad but Black Friday/Cyber Monday is around the corner.
the captain xavier part is so funny
You can print that drum with MUCH lower infill. but maybe an extra perimeter in case you need to drill/ bore anything.
Was already doing 3 walls, 9%. I wouldn't go any lower.
Make.Test.Battle wow that looks like a lot of material for 9% maybe a different pattern like triangles. Though I have printed stuff as low at 5% infill before and it worked fine.
intro was awesome and the music with the music with the oscillator had me cracking up
Every time you Upload a Video i am getting excitet
Love your content and keep on doing such a Great work
Have a nice day
PS: i am from germany and my autocorrect isnt used to englisch words, sorry for That ;)
Thanks dude. Hope you have a nice day too.
So you're saying that the same power that pushes a mega at 70something fps will push a halfdart to 150 fps? That's insane. Or was that the original spring? Also thanks for doing all that work for us man, now we can just copy you 👍
That's with the K26.
And that's the idea, copy, learn and improve upon. :)
Ah, the heady days when Toilet Paper was such a simple, available luxery...
I love your videos ! Pls never stop!
I'm trying.
Epic editing!
Thanks man.
Beautiful ASMR Video @6:17
Yep. ;) That's the idea.
What size is the PVC pipe? Its not linked in the description.
Is the 3d print files avaliable?
Good video enjoyed watching 150fps its very respectable for most events it seems thats around the cap.
It's 16mm Australian PVC electrical conduit, not sure if similar is available online internationally. Did link 17/32" brass, while more expensive it is a better dart fit.
Added the Drum link to the description. Thanks for reminding me.
www.thingiverse.com/AnUndeadDude/designs
@@MakeTestBattle I print mostly in ABS so i could get a perfectly acetone smoothed prints, I have also painted ABS juice to build up areas. I am also into budget cheap mods i dont want to spend to much into something i dont get to spend a lot of time on. I seen this blaster at Kmart today in Victoria on special for $45 so not a bad buy at all. The lever action would be really cool as well i think with the right acompaning attachments as you pointed out.
oh my God I haven't seen a video from you guys since 2018 it's been so long.
I posted the Infinity Blaster a week and a half a ago. :P
Thanks for sticking around.
I thoroughly enjoy your positive way of talking us through the content... you being ‘calm’ throughout the build... even when things go a little wrong or different from what you expected... is nice to watch! Great vid. Thanks!
THANK you, was going for that. This is more of a build log than a tutorial; was going for more a story that you can try too than an info dump.
Make.Test.Battle you did a great job at it! I cant imagine the amount of time invested in making this video. I like how you use a lot of ‘maker’ tricks in your vids to make the content enjoable to watch... takes a lot of editing skillz to pull that off... especially with the audio staying coherent throughout. The thing is... I know a good vid when I see it... I just don’t posses the skills to make them myself :-)
When drilling out the cylinder for rear loading ports you could try using a piece of tubing as a drill guide.
(As in, "load" a piece of tubing from the front of the cylinder and drill through it with a drill bit that just spins freely in the tube so the tube keeps the drill centered.)
When cutting multiple parts on a chop saw it is common practice to clamp a stop the fence so that you don't have to measure and mark them all.
A piece of wood (or other sacrificial material) clamped to the fence should stop the pvc from flexing and keep the cut square.
I do believe this is the third time I've watched this.
HADA BADA
I laughed *far too loudly* at that addition
I just got these in the mail from the ebay Auction....just randomly put them on the Big Shock and Hot Shock...and they fit perfectly and shoot regular darts crazy hard!
with a lever action mecanism .... potentialy 20x3 darts in each hand .... wouch ! very effective CQB loadout in my opinion.
With your modify mega thunderhawk clipfed shotgun .... WE are ready, man !
flywheels should no longer look as high ...
Your editing style is, by far, favorite :D Your music syncs were so on point, I loved them all. Also, this build is AMAZING and I want one XD
Thanks dude. Just trying to do my best with what I got.
Nice. Makes it a usable blaster would definitely like to try this 😊
Yes. Do it for the shotty, and get some shotgun gameplay.
23:54 😂😂😂😂😂 absolute banger
Dude that is super!!!😯😎
Really it needs a brass breach and a proper barrel.
Make it feed off a clip is easy on lever action since you can put the mech on the opposite side of the priming handle pivot. I meant magazine oops
Thought the same already. :D
@@MakeTestBattle if you do that do something similar to the sledge fire. Some madman stuck a 25kg spring in it so it would be crazy powerful. It on CZcams btw.
You could've drilled the front out first then take out the spring and break the back plate with a hammer and screwdriver since it's a lot closer to the front.
The plunger would still stop at the remaining rim of the back plate with all that dead space.
I nearly used a whole 25ml tube of epoxy to fill the dead space, say 20ml. If you are using 17/32 brass that would be 15.7cm of barrel's worth of dead space. You wanna that filled in.
I'd try drilling a small centered hole from the front then flip the plunger tube over and follow the pilot hole with a forstner bit to take the back plate off, letting you remove the ar spring. Then put a piece of tube where the ar spring had been and fill in around it with epoxy. (Hopefully this would be fairly easy and use much less epoxy.) Then drill out the pilot hole to your preferred size.
Do you plan on adding a stock to it? You mentioned it was a bit tricky to prime without one in the heat of battle IIRC. Would a caulking gun with some silicone or adhesive work better to fill the dead space?
Yes, definitely. It needs a stock.
And yeah, I guess a caulking gun would work, depends on the filler and if you can drill a clean hole through it.
I have a theory for barrel lengths.
To get the right length I believe the barrel should have the same inner volume that the plunger tube has, that way when all of the air has been pushed the dart has left the barrel.
This would utilize all air in the plunger tube, and get the dart out before there is a vacuum in the sealed blaster.
Captain Xavier K26 Remix when?
When I reach my patreon goal.
I wanna use the licenced song F.C.B. - "Excalibur", it's a 90s remix of O' Fortuna, which means i won't be able to put ads on it.
YES! Cool intro and great Vid!
Thanks dude.
By the way, there's "some' pre-compression'" on that factory setup. On a side-note; I didn't fill the 'dead-space' in the plunger-tube my 1st time repeating the you've outlined here. Hilarious video by the way. I've watched it quite a few times. I'm going to be repeated this mod again in a different version(I do Integrations.)of this blaster. The next iteration of this build, I will be removing the dead space from the plunger-tube, In order to compare the difference between 'with-dead-space', and 'without-dead-space'. I'll be sure to send you pictures, and give you all credit for your influence. The blaster has been a great deal of joy, and frustration. As a result of this build, I've developed a new type of ammo. More on that later. Warmest regards. MrScott54, BionicBlasters.😉😁🤓😇😃😎🤠
I got....A MENTION!
This is a fantastically shot and edited video! Also it's just a great and fun mod!
Aww thank you dude.
Making this a shotgun makes it better than the "The Judge"!
Yeah, it has double the capacity and it’s way smaller
I think, with the design of this blaster, you might be able to put a pump grip on that if you added more barrel.
Reminds me of the sledgefire video a few years back
Good times
Joshua - nice profile pick
Polar Flare ayyy a man of culture
I thought I got drunk and replied to my own comment for a min there 😂
Forgot to tell you, that I used a much K26 as was possible to fit, get it to compress and still catch. I think I was able to get 15.5 coils of K26 in there. It hasn't blown up yet, but I simply can't use Stock Megas, or Accufake-Megas. They Explode or blown the heads off. So, I decided to go with Modified Mega-Slugs. Fired flat from my shoulder, I can hit a 2Gallon(Oh yeah, that's 7.57Liters in Australian.😎) bucket from 60 feet(again, in Australian, that's A bit more than 18meters.) When I do firing demo for my CZcams channel, I'll be sure to give Australian numbers as well. MrScott54, BionicBlasters.
Has the prime handle split at the bend yet?
I wish the priming was a bit smoother
Yeah it's a little chunky. I may end up reinforcing the pivot point inside the shell.
First!!!!!!!!
Lol, the predictive captioning when you say megas
Loved the ok go songs!! keep singing
"Now let's take out the screws!" *rips out all internals*
0:48 good old cockatoos lol.
pretty much
Second
the air rest restrictor parts are 3 times thinner than the tube body so you can just pull them out through the front
I've actually found that a C-836 works well in the Megalodon
Sweet.
What modification did you made to shotgun setup? I removed AR and inserted K26 spring and my mega dart fires 80FPS. but my shotgun drum (Same one from the thingiverse link) only shoots 40fp max. I am not sure what is wrong with my shotgun drum.
I want to see the video of someone getting pegged in the back with a pvc barrel at 150 fps when the tape gives way again. Then just pretend it’s the new Nerf Mega accu-super-ultra dart.
Thinking that with the dart posts removed, you should be able to shotgun rival rounds?
Interesting idea, but yes
THAT'S A BIRD!!!
Brother, I sure appreciate all of your pain and suffering. You're actually quite the pioneer. I modded my Megalodon to the point it requires Reinforced Mega-Slugs(a reinforced mega half dart 💪!)!!! Fired from shouldered-height (I also made it lever action shotgun 🤠😎🤓!) I'm 5'11"(I don't know what that is in metric, use google 🤔.)I can 5 gallon pail reliably at 60', fired shoulder flat. Special thanks for great idea of reinforcing the plunger rod. I have no doubt it would've to come to the spring pressure that I'm running in this thing. I haven't tried modified the Accu-Fake slugs yet because it won't F@#$$---g stop raining in my neck of the woods.!!!
Yes please, those tapered plunger tubes are killing me Hasbro. Awesome though, great video, sweet content, if I had money I would give it to you sir but I am also broke so ... yeah sorry but great job and keep up the good work
Where do you get K26 in Australia? Did you order it from the USA?
24:50 what about using a deburring tool? 31:38 maybe they were using a diamond cutting disc for tile?
let's replaced this with a piece of K26...
*captain xavier breaks through wall
DID SOMEONE SAY k26??!??!?!?
Great mod did you time your tickling tool to the music lol great results wish i had your editing skills
It's just practice and I just cut to the sine wave spikes on the audio track. It's mostly time consuming to do it 40 times.
I think brass would provide higher FPS yields.
Yeah definitely.
Looking way better man looks like you lost weight?
A little.
Hell yeah OK GO
Can you do this with the turbo advance drum?
With thin enough OD barrel, like brass or PETG tubing.
Do you mean to tell me you electrical-taped a hole and expect it to hold up over time? No. Put a length of electrical tape on the inside of the PT and put a bit of epoxy inside the hole from the outside. Then remove the tape and retape the outside to help that little epoxy plug from popping out.
I was thinking that, I think I said it and cut it from the video edit for time, but it isn't touching nor rubbing against anything.
@@MakeTestBattle I see. Overall, a lovely build!! Very cool! Reminds me of the Super Sledgefire (I followed your guide and made one when I was beginning with the hobby).
I used a k26 and then the handle cracked while I was priming it. What do I do? Does anyone know where I can print a replacement?
Can I do loudout videos?
15:22 lol
13:31 what has that desk seen
You need a cross slide vice for that drill press
👍
I miss Ryan
3D prints sleeves
sleeves are too loose so end up using tape to shim anyway
keks
I know right. I made the model to match the tight inner diameter of the mega barrel 18.4mm, but the prints came out small.
Floating O rings tho
Need help.reassembling my Mega Megladon....
PUPPY
"She is 5yo."
"No, always puppy"
What's the plastic tube you are using?
16mm Electrical Conduit
MTB sound effects not included
That would be so stupid if it were HPA 😂😂😂
YES! with smooth resin printed drums.
@@MakeTestBattle do it!
why didint you do it rapidly
By the way, my Instagram has pictures of my Integration of the Megalodon with my Mark III version of my Lever-Action-Prime.
Needs pump action
I didnt figure out how to get that green catch back in there either.
Okay, so on one of the sides of the shell there should be a slot shaped like a pentominoes N. It goes in there, and you have to click it into the upward postion before putting the rest of the internals back in.
Now make it rapid fire
What do you mean? It already has slamfire
Am I hallucinating or is he editing the tool sounds to go with the music?
That drum. How can I get one?
www.thingiverse.com/AnUndeadDude/designs
(3d Print)
24:00 why was this made to go with the beat tbh
My favorite thing about this is when he had to lubricate the gun I had a thought about a Twitter post I saw once someone was talking about how A store owner God really weirded-out after the guy started buying large quantities of lubricant and eventually he told the shop owner that he was still a virgin and the lubricant was form Nerf gun mods and stuff it's just a funny story
I think it is fake as he did not show when he primed the blaster ,maybe he taped a moded stryfe
Only true idiots think a flywheel blaster is actually capable of out performing a springer/direct plunger blaster.
Ewh Ewh