Expensive vs Cheap Calipers
Vložit
- čas přidán 7. 08. 2022
- $ QFUN Digital Calipers: amzn.to/3p2F6lK
$$ Carrera Precision: amzn.to/3vQEymP
$$ Shars (Alternative to Carrera): amzn.to/3AewRK1
$$$ Mitutoyo Calipers: amzn.to/3BP4kvG
Don't forget to check out the Etsy shop!
Router Depth Jig: etsy.me/3HdUZya
Woodworkers Notebook: amzn.to/3u85Ogh
▼ ▽ My Gear
- Camera: amzn.to/3eqbBXa
- Lens: amzn.to/3l2dH0H
- Tripod: amzn.to/3vd1haX
- Microphone: amzn.to/3vdqBxA
- Lights: amzn.to/3vCULw9
▼ ▽ Music from Uppbeat (free for Creators!):
uppbeat.io?referral=jake-g0f71
................................................
Disclaimer: Some of the links contain affiliate links, meaning I will earn a small commission when you purchase through my link at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.
▶ CONNECT WITH ME
PODCAST: propertoolspodcast.com
INSTAGRAM: / make_with_jake
FACEBOOK: / makewithjakeofficial
WEBSITE: makewithjake.net
STORE: gumroad.com/makewithjake
................................................
Music from Uppbeat (free for Creators!):
uppbeat.io/t/qube/play
License code: FRH46PWOVPWJXBNU
Music from Uppbeat (free for Creators!):
uppbeat.io/t/matrika/smack-that
License code: I8ADFZIYIWEEETF0 - Jak na to + styl
Mitutoyo calipers don't need zero calibration each time when they are powered on. Once in three years the battery needs replacement, that's when you set the zero point. After that, they are ready to measure whenever your power them up, even with jaws open. Which is a huge time saver and (IMHO) the biggest reason to buy them over the cheap ones.
Thanks for watching!
There are plenty of reasons to re-zero. Comparative measurements being one, vastly different inspection temps would be another.
I have a Husky from the orange store which was around $35 and been happy with it so far. I believe it came with a 2nd battery but honestly don't think I've changed it in over a year so far now. Also came with a case which I liked. Maybe one day have a bit nicer one but honestly this one has worked perfectly and is accurate.
awesome, maybe I need to check out these HD and Lowes calipers. A lot of comments saying the batteries last over a year. hmm...
I do not have verifiable source information on this, however I have been told by some knowledgable sources that these devices are a bit like LCD screens : There are 100 or so brands, but only one or two actual manufacturers. I would not say as a certainty that the orange store device is made in the same room as the Mitutoyo, with a different logo stamped on it, but I would also not go into a months-long depression were I to learn this to be true.
Most cheap calipers DO NOT save energy when off. They turn off the digits but the current draw is only a teeny tiny bit less. So unfortunately one must remove battery to have good battery life with them. This is actually one specific area where the mitutoyo stands head and shoulders above the others. They tend to use 1/3rd the amps of others when operating, and turning off, 1/15th.
I just bought a Starret dial vernier calliper and it is just sensational. The vernier is by far the most used tool in my woodwork workshop. Buy once cry once
Nice!
Second time today that I’ve seen someone praise the Starret dial calipers.. starting to think it may be worth a shot
@@robbiewilliamson357
I prefer American made tools and Starretts are not only American made (not all unfortunately) but they're also the highest of quality.
2:54 finally after an hour going through many Expensive vs Cheap Calipers vids i finally come across a person who within the first 2 mins answered that question...fit n finish...so no i know...i do not need to carry on with the rest of this vid.....
I have a Workzone Digital Caliper, which is at least 10 years old. Cost about £15.
I've just checked it against 2 Micrometer standards (1" and 2"), and it's dead nuts. 😎
I have pretty much all of the calipers you talked about - even Mitutoyo’s. I disagree with your assessment of the $10 plastic ones. I get them for $7 when they are on sale. Use them all the time for woodworking. They do the job and work fine.
Thanks for the input!
Lol, woodworker. Try them on machine work and say they're fine 😂 let me know if you hit your tolerances. Woodworking doesn't work in the kind of resolution that metalworking/machine work does. The error on the cheap ones won't even be noticeable in woodworking but could mean scraping a part in machin3 work. But then again we don't use calipers for accurate work anyway
We have the same Mitutoyo calipers. Very informative. Great video.
Thanks man! I seem to have quite the collection of calipers. Idk how that happened.
@@MakewithJake Ya, that escalated.
Your editing, quality of video and presentation punches so far above your subscriber count. Your channel is absolutely going to explode one day. Hang in there!
Wow, thank you!
I like the fraction read . I just bought a set of seconds, I gauging with the dial indicator. No more batteries. Like 30 bucks.
sweet! Thanks for watching!
Awesome video Jake, I love my calipers!
thanks for watching!
Cool. I've never seen a set of calipers that displayed fractions.
This is awesome lol I have those black plastic ones and keep them in the truck just in case but I have some that I bought at lowes for $30 and they have been a work horse. Had them for over a year now and battery is still kicking
haha, nice! Thats pretty good battery life! Im really curious to see if the new battery in mine lasts a while. (it came back to life, so the experiment continues!)
@@MakewithJake nice hopefully it stays alive
I have a set of metal Pittsburgh calipers that I've had WELL over a decade, and STILL haven't switched the battery out. I still have the spare that it came with. The movement on it is kinda scratchy feeling, but otherwise I have no complaints with them.
I've tested my metal digital HF calipers that I bought about 15 years ago for $12 against a friends Mitutoyo and they tested fine for all but really fine machining work. You can get the same ones today for $23($16 if you wait for 30% sale). After all, it is only carpentry.😉
Buy once, cry once. Just buy the good ones and enjoy! Mitutoyo, Brown and Sharpe, Starrett, etc.
1:50 Microtech calipers, and some other brands, actually have a mechanism to indicate when you press with a predefined force (0.8N and 8.0N usually).
Why do woodworkers use fractions? Fractions are stupid. Metric is so much easier.
Great video but thumbs down for suggesting imperial over metric! 😢
I loved you video on how to make dowels and subed. Thanks
Thanks for watching!
I had Mitutoyo calipers, cost $220 in 2009. Needed to use WD-40 or white lithium grease (mfg recommended) to keep them smooth. However, they were *awesome*. High quality. I used them to measure weld defects when doing ultrasonic flaw detection. Unfortunately, one day someone stole them out of my desk. If you are going to use digital calipers every day, get Mitutoyo. That being said, I just bought a $20 pair of calipers at Harbor Freight (Pittsburgh brand) for a job I have tomorrow.
5:16 Ah ah ah, no.
Oh man... I have one of those cheap ones I got from Amazon and worked well for what I was using it for. But somehow, I lost the lid/cap or whatever you want to call it that covers the battery, so now the caliper is useless. I may have to invest in a better one, like the $30 range you mentioned. Thanks for sharing this info!
Thanks for watching!
Great job. Dial calipers are legit. I cut my teeth on dial calipers which reminds me of how much I hate things with a metallic aftertaste.
Especially after drinking orange juice. gives me the heebiejeebies just thinking about it...
Most machine shops (even in the US) use metric sooo..... mayve you should use metric 🤷♂️
Considering 1/128 of an inch is .008" for woodworking, we don't need to chase thousandths of an inch. But calipers are awesome in the shop for wood as well as metal. There are decent dial calipers that also have Fractional markings which are handy for woodworking. No batteries and familiar markings. Win win.
Exactly!! Thanks for watching!
Love this video! Calipers are the only tool I always have with me in the shop and within arms reach at my desk.
I completely agree on the cheaper calipers burning through batteries. I have a pack of 50 or so batteries I ordered on Amazon that I just keep in a drawer. 🤣
Man, that's a lot of batteries!
The king is back!
Where? 😱
That Pittsburgh caliper you threw away is my favorite. It's very accurate...and cheap enough so you can buy five or six and have one within reach anywhere in your shop.
I agree!!
While I have never used the Harbor Freight brand per se, I have used good quality plastic calipers for anything where tenths of a millimeter are good enough - and let's face it, that's just about anything.
Plastic or metal which is better?
Your solution for the batteries is to just slightly disconnect the battery when not in use. Now they have lasted over a year and still going. Will stop that pesky cursive battery problem.
Truth.
Dude, way too lazy for that! The Carrera set require a screwdriver to open and close the battery compartment, making things difficult...
Ok so i've gone my whole life calling those Vernier's lol......are those completely different?
One place the plastic calipers shine is when electricity is involved.
Lol about the Imperial, love how stubborn some people are.
When’s your caliper giveaway video coming? Ha ha. My calipers I bought 16 years ago are miraculously working on only their second battery. It’s like the Hanukkah of measuring instruments.
dang! thats crazy! Maybe we can think about giveaways around 10k... haha
I just use 7$ calipers from my local hardware store they work perfectly fine I have bought them a few time but that cause I work with metal and use them for making scribe lines if I used them properly than one set would last forever
Awesome!
If you are looking for accuracy with no battery issues or chips in the rack, get yourself a vernier one..little harder to read, but it is significantly more accurate..
i just discovered that my CraftRight calipers are over half a millimeter out from reality, this is not even close to usable and has cost me days of headache trying to prototype some new fittings the last few weeks, Do I am telling you now that there is a rice point that is too cheap to go.
I've never heard of ten-thousanths of an inch referred to as tenths of an inch.
I buy cheap calipers ( less than $20) because the accuracy is sufficient for the woodworking that I am doing. My problem is that even though I treat them carefully and regularly replace the battery, they only last about a year or two and then the display starts to freak out or dies completely. I am afraid to buy good ones as they may do the same thing.
Just picked up a Pittsburgh Caliper yesterday because 30% off made it 7 bucks. I am not doing machining and such so this was more of a fun buy. Plastic jaws. "Close enough for government work."
When doing woodworking, even the cheapest calipers are as good as the most expensive. The amount wood expands and contracts over the course of a single day makes one part in a thousand accuracy absurd. Cabinet making isn’t machining.
I would even say for woodworking none of these machinist's calipers are appropriate, as the dust and chips will end up damaging them. There are woodworking calipers that are more robust and measure to within 1/64 in, with no batteries or dials etc.
I have expensive one at work, cheap ones for home wood shop. Both work fine. But the cheap ones eat thru batteries so fast.
Right on! Thanks for watching!
For woodwork I just use mechanical calipers, with a regular vernier (not a dial). Small and sturdy enough to just live in my toolbox, no battery to run down, and accurate to 0,05mm which is plenty for woodwork.
I do have that Mitutoyo for more accurate work, and the battery lasts forever. I just hate the case it came in, way too hard to open.
patent on battery saving, only in the USA 😂
This dude has a nice clean face. He should do commercials.
If my cutting board is 27/32nds thick, it was on purpose 😤
Also millimeters are too small. You can't make anything with those, it would take forever.
What is this, a cutting board for ants!!??!!??
The Hyper Tough $9 caliper drops to 1.5 uA when off.... Hyper Tough is the only one I have (out of 5) that goes below 16 uA when off... So oddly, my cheapest crappiest caliper is the only one that really shuts off when it is off.. (well almost off at 1.5 uA) ...
The others I have, all cheap, when off still draw 16 uA to 25uA which might drain a battery in 200 to 300 days or so.... when off...
I assume the more expensive calipers do not do this......
NOTE: uA= Micro Amps.
If the above does not make sense... it just means on some calipers, when off, they draw almost the same energy as when on.... really weird... but I checked all 5 of mine and 4 of them did... I checked them because my batteries kept going bad even when I did not use a caliper for a while...
There was so much going on with this video to the point that it distracted me from the Callipers. AND I AINT MAD AT IT 😜
I mean, at the end of the day...its just calipers...right? XD
No real accuracy comparison on the calipers though 😕
5:40 Probably wouldn’t have happened if you left them at metric. ;-P
Pity you do not show the name of the calipers you talk about , for example @4:00 - what is the name ? QFUND , QFUN .... ?
Note that 0.0005" is five-ten-thousandths of an inch, not five-tenths. Five-tenths is one-half.
Measurements in increments of 0.001" is commonly needed for work with guitars.
The cheap calipers that you just bout provides measurements in increments of 0.01". That would be fine for most woodworking, but not some. That store where you bought it sells some much better calipers, at a more expensive prices.
Your observation is correct. However, most metal working machinist, right or wrong, refer to .0005 of an inch as "five tenths".
You are technically correct, however, in the manufacturing/engineering field, we refer to 0.0001 as a tenth. (or 0.0005 as five tenths).
The original battery in those calipers will be really cheap make, and could have been in the caliper for a long time.. I always fit a decent brand new battery and have always had good battery life, even with cheap Lidl or Aldi digital calipers.. Most calipers actually come with a second battery in the case, but it will be a cheap make.
I replace them too, and they still are always dead. :-(
He left off the most important issue in making this choice today: Absolute origin.
The Mitutoyo caliper shown here "might" do it, and all iGauging products do - this means you do not have to continuously set the "zero' point (or wonder if you did). It is ALWAYS right!
This feature by itself is far more significant than any of the quality comparisons made here, so this video is unfortunately a bit useless.
Japanese Mtutoyo dethroned the famous US manufacturers decades ago because of their supreme quality control, but what goes around comes around. Mitutoyo have now been dethroned by iGuaging Absolute Origin products, not so much through supreme quality control, but through technical innovation.
If you want the best of the best today, sadly it is no longer Mitutoyo, but iGauging.
Hey Jake! If you're looking for a guest on your CZcams channel, I would be thrilled to share my expertise on ranking in the Google three-pack for woodworking businesses.
Subscribed! Were you at Workbench Con this year?
@@MakewithJake Unfortunately, I haven't.
물속에서 쓸려면 IP68이나 돼야지
Thanks for watching!
was almost going to listen to what you have to say.. then you said to use imperial.. mmmm yikes
0.47 "measures down to .01 mm, which is less than I thickness of a human hair"
*Shows a picture with . 01 mm scale at the bottom that is clearly much shorter than the thickness of a hair*
Buddy...
Thumbwheels are garbage... Press on the movable jaw itself, not the body when measuring.
ZERO information given.
is that the metric equivalent of awesome?
@@MakewithJake wood elf, imperial wood elf...
Use imperial? Unsubscribed
𝓅𝓇o𝓂o𝓈𝓂 😀
Thanks for watching!