Scrolling Text Led Display | 8X48 led matrix
Vložit
- čas přidán 6. 09. 2018
- Scrolling Text Led Matrix | 8X48 led matrix
Circuit diagram led matrix: goo.gl/A16mXH
Circuit diagram led matrix driver1: goo.gl/mgzAhQ
Circuit diagram led matrix driver2: goo.gl/77Sx2n
Code: goo.gl/cJf3Ce
Cover songs collected from NCS youtube channel: / nocopyrightsounds
Song 1: • Video
Song 2: • Elektronomia - Limitle...
Song 3: • Electro-Light - Symbol...
Please subscribe my channel for more update: goo.gl/WfYhoR
Please Like our facebook Page : / eassytech
~-~~-~~~-~~-~
Please watch: "How To Make 4x4x4 LED Cube"
• How to Make a LED Cube...
~-~~-~~~-~~-~
#Led_Matrix
#easytech - Věda a technologie
Your video and your work is really very easy to understand. Great job & Thanks for this video.
How comes, someone dislike this kind of videos,
Keep up dude, you inspired me
nice and clean instruction...very helpful. Great job & Thanks for this video.
That was one of best tutorials ive ever seen 🤪🤪🤪🤪🤪
Thank you very much for your codes. This is the only coding that worked on my project.
Can you send me the code.
You are a very hard working man! Great effort to make and working such a great scrolling text display. wonderful to see.
Молодец, хорошая работа. Ставлю лайк!
here comes the total information about the 8×48 led matrix ... thank you so much
Very informative and useful video. Thanks
Good One...!
Thank you for making this video
Very good we like your good demonstrate
Thanks sir aap mahan ho genius
Wow, nice job. How long did that take you; also, did it work on the first try?
one of best tutorial
The circuit diagram of the matrix controller 1 is the same as diagram 2, in the description of the video.
I think the row LEDs are missing
I simulated your circus Led Matrix with your code in Proteus. But it does not work, maybe it has the faults in your code. The signal of dataPin1=4 does not work as same time as another Pin to make the 74hc595 moves signals. Can you recheck your code. Help me please!
Maa Shaa Allah z10 video. Esi ko kihte hen original Mr Engineer. Es ki kost kia he.
2,3,4 and 5,6,7 connect on Arduino pin? But which pin for 2,3,4 and which pin for 5,6,7? Your quick response will be appreciate .
Still waiting for your reply................
Pentastic work
Tq east tech. Preparing of make one of those. 👍
I have made one similar by looking at your design. Working perfectly fine. But can you please tell me how to display numbers and small alphabets? The code has only capital letters. Also how to add BT-HC-05
Thank you :)
Keep the great work ahead.
what value of resistor and transistor and ic have used
RESISTOR VALUE IS 220OHM AND TRANSISTOR IS 548 AND IC IS HC74HC595N
Very interesting scrolling text led circuit
Super creation
Can you please tell me the parts required for the led Arduino nano matric 4 by 48 scrolling text display screen
What is the dimension of the zero vero board that you are using ? And how big are the led ? If you can remember
Hello friend excellent video, friend make a led sign of the double size of bone of 16 x 96, it would be great that you teach us to increase the size, please make it friend ... Greetings from Ecuador
Daisy chain 2 shift registers for the row control and add 8 more shifts in the code for row switching. Redefine all the fonts to support the new bitmap size. It's simple.
فائیدہ ایسی وڈیو کا جو ساری دیکھنے کے بعد بھی پوچھنی پڑے :(
Hi, I would like to know the transistors and capacitors that I use to make this led board, regards
How did you learn all of these........I just entered engineering........and want to learn it's complete working and want to indicate more and more like you please guid me
Which components have you used, means IC, resister, Transistor, have been used by you
Reply me your answer plz.
And of what resistance are those resistors used in the display screen
Great video and you have very big heart aapne code link de rakkhi varna bhut se is cheez Ko sell kar rhe i subscried your channel for such a good videos
Will this work if i use only 6 ICs and 40*8 LED?
please answer my question that what does in this video mean by Arduino pins and which pins for column 2,3,4 and row 5,6,7 ? please let me know where to connect 2,3,4 and 5,6,7 on Arduino..........i am waiting for your reply
ओ8छ
THAT RIGHT CONNECT TO ARDUINO PINS FOR COLUMN 2,3,4 AND ROW 5,6,7
Hi there , 2,3,4 and 5,6,7 where to connect on Arduino? Your quick response will be appreciate .
Which arduino pin 2 is it. Is it d2 or a2 please reply fast it will be highly appreciated and by the way a great project
Hello brother ! Can you tell me the size of your zero board? And one more thing is that your driver 1 and driver 2 diagram is the same picture.
Very good video.
@@easytechzonesok
Thanksfull to you.
first step for learning arduino.i am interest once
One important schematic is missing and that is the TO-92 transistor part on your drive. Matrix driver 1 and Matrix driver 2 are the same. I know you did it on purpose, but the heck to the unknown. IT is in the video.
To anyone out there. It is BC548 that he sketches for the row driver.
Is it okay if the i used 6 rows? Instead of 8 and what will happen if it's not 8? There will be a changes on codes?
Is there a difference between Ardino Ono and Arduino Nano? Possible way of connecting between EIS 74595 and Arduino Ono. Thank you.
Çok güzel bir devre elinize emeğinize sağlık
is it possible to display the clock with rtc module..if you can, send the code to me ... thank you (sorry my english is bad)
we have to connect row and coloum id wire also?? we have to connect arduino nano v+ and gnd
that's very hard working
superbbb
very nice. Thank you sir..i will try at night...
Welcome
is it possible to make the text change based of an input such as from a motion sensor
Sir I am using 4 7segment displays for scrolling text
What code does I use pls help me sir
Ok
Please how to extend the rows to 16 numbers in program what part of the sketch should I modify? Thanks awesome
Sir, Does Code and circuit connection works fine with Arduino UNO Chinese Clone which has interface CH340G instead of ATmega328p ??
ola vc envia esse esquema completo junto com o circuit diagram for row por email?
Do we need to connect vcc and ground of row and column ics
Bro ,what's the value of resistor 1(bluecolor),j resistor 2, (green colour)...
And IC value. Plse bro iam making as CLG project
Saw Ur video , can u make a customised display board like this ?
Really nice. Can you prepare similar to this and send me with covered frames if possible. I will pay for it
Can I remove the data cable after uploading the code?can it work properly when I disconnect Arduino from my computer?
yes,it will work properly as far as you have a power input
Awesome bro
If I use 16 Columbus then Have I need any trangister ?
What is the value of transistor and resistor? Please!
The source of the power supply is "+" to "vcc" and "-" to "gnd", and the arduino "+" to "5v" and "-" to the gnd.
Right????? My English is bad sory.
excue me
Where is the line of 4:29 to receive?
where are ROW1-ROW8 ?
Which we have to solder first?
Tell clearly about Arduino pin details . Arduino Nano has analog and digital pins where should I connect ?
the Circuit diagram led matrix driver1, and the Circuit diagram led matrix driver2 are the same ! please share again
Can I make it using audrino uno, if so there any change of code
Can you make video on
How Arduino supports editing software for making 2d printer or drawing...
Wow where in the world did you get a prototype board that big? 😮😮
Power supply of how much voltage should be atleast provided
hey bro is it fine to use a npn transistor and not 4401 rectifier ?
Sir please tell the power supply pins. ...and also tell current volt and amp ...... plz reply fast
#NMElectrical
What is the process to install the program in chip ??
Give the description of components ??
Name & specifications of chip in which program is installed
Thanks ❤️
thank you
Hallo sir kindly tell me system you used to generate those alphabets I would like to include lower case characters symbols thanks
Can I do this with Arduino Uno and pls give the components list .....
very good bro...
i want to modify your circuit plz help me in this regard...i want to modify 6 x 30 LEDs what changes will be made in there circuit diagram and Arduino codes????
Circuit diagram for Row link sent me plzzz! Link did not put in Description !
Nice bro
Sir can i get ic code and resister's value, transistor code and diaghram
Awesome project. What I will make it bigger like 64X16 LED Matrix, is it still possible? Thank you for your response.
Should I make it the same like this?
Sir,
How much rupees (without arduino )to buy these components?
And also tell me which pin I should connect likely from code
Non
ola caso seja possivel vc enviar o esquema completo desse projeto me avise por favor pois te envio meu email obrigado ate mais.
I love it
very nice
nice job to try
That was really huge arrange as of me
Sir Please send me full circuit diagram.in full details. .as soon as possible. .
I'm waiting for your reply.
I have connect the leds in card board ...but can't connect on circuit. ..
So plz send me...
I connected properly the circuit according to your code,No font show only scrolling LED Matrix,please help me.
ভাইয়া , বিয়ে বাড়িতে বা বিভিন্ন অনুষ্ঠানে যে ঝাউ বাতি গুলা লাগাই ঐ ঝাউ বাতি গুলা কিভাবে বানাবো ,,.. এর পুরা হিসাব এবং বানানো নিয়ে একটা ভিডিও দিলে উপক্রিত হোতাম ....
How to change characters and pls show me where to change characters in a program
Thanks bro
Superb but home made how is it possible
What have you connected just beside to Arduino