Beginner Wood Spirit carving using the Ram iCube micro carver. 🧙♂️
Vložit
- čas přidán 22. 03. 2023
- My first Review of the Ram iCube micro carver while carving a Step by step beginner Wood spirit.
Use code: CARVINGFUSION for 10% off any micromotor unit.
Here is the link to the Ram website: www.ramprodinc...
#woodcarving #howtocarve #Rammicromotor
#Ramicubereview
#woodspirit #beginnerwoodcarving
I came across your videos last year, your ' I don't care, don't give a sh*'t' attitude is a breath of fresh air.
I'm in my 60's and you've given me a new purpose in life, weather my creations are good or bad, I don't give a sh*t.
Carve deeper my friend, you are truly appreciated.🇨🇮🏴☠️
I’ll tell you what someone told me about facial feature sizes… I’m sorry if you already knew this and what I’m sayin is like “no duh, Lace”.
It’s a loose rule that can and should be broken for art but here it is:
If you put your thumb right up next to your first finger, and straighten out your first finger all the way you can use that length like a jig.
You’ll find that the tip of your nose to the top of your nose is that length.
Then the same place at the top of your nose to the outside corner of your eye is the same length.
Then the tip of your ear lobe to the top of your ear - same length.
Also (you don’t have to use your thumb for this one): the total length of one of your eyes from corner to corner is the same length as the space between your eyes from inside corner to inside corner.
These guides helped me out a lot when I used to do drawings.
Like I said, not a hard and fast rule but maybe this’ll help some folks.
Thanks for doin this awesome demo, Jordy! I was curious bc I have the master carver and I like it pretty well but like you said, the connection to the hand piece does get a bit wobbly.
Carry on!
Very cool info thanks lace 👍
Thx Jordy ! Just a quick note on proportions... I found something on the web that says all of these can be the width of an eye. The distance between 2 eyes is equivalent to the width of one eye, the base of the nose is the width of one eye, its length 2 eyes aligned vertically, the mouth one eye vertically under the base of the nose and so on sequel, weird, but it works! But if you have the 'eye' so much the better !!! 😂😂I dont care, but maybe yes...Who knows ?!
Wow!!! So, I've been silversmithig for a lil while. Among a few other hobbies, I have a love for wood lol. I watch a lot of CZcams videos every day to learn silversmithig. Well, i stumbled upon your fantastic videos by complete accident, and I'm instantly hooked now. Awesome work, awesome guy, and I am extremely inspired by your work and videos! Thank you for the inspiration, my friend!
Awesome thank you
I love your attitude of ‘getting shit done’ and not caring too much about stuff. When you take things too seriously you get finicky and mess around too much. These carvings are better with a rustic charm to them. And you are very able in your abilities too. I’m going to give woodcarving a try!👍🇬🇧
I love your real no bullshit approach to products that makes me more interested in a product
It's funny how many times I can blow the dust you do! I'm too interactive! 😬 Am I the only one?! 😂😂😂😂
I just try to move the screen😂
@@Sernaabq 🤣🤣🤣
Carve deeper! That's actually helped me a lot with my chainsaw carvings. It goes through my head every time I'm carving, so say it every time you make a video!
Oh man , I'm just sitting here watching your video and now I need to go out and carve you keep me motivated. Thank you
Damn you Jordy Johnson, you’re gonna make me spend more money 😂 Great demo. Thanks again 👍🏽
Thanks for the demo Jordy...
Interesting and affordable little carver...yep you put the want back in everyone...
The wide driftwood spirit made me think of the carving on the log at your beach..yeah a little different but I remember it seemed a little laidback like this one today...
Excellent video Jordy..I hope you're feeling better...🌿🌿🌿
Well man congrats on hitt'n 60,000 subs. Hard earned,well deserved 👏
Looks to be a wicked little machine,but like anything looks to be a bit of a learning curve. But good machines are alot like good people the more you get to know them the more comfortable you will become with them.
Oh yeah,by the way those Chinese burrs are freak'n wicked. I did a entire flower & leaves carving with 1 medium Chinese burr. Inspired by some krazy Canadian guy...his name escapes me at the moment 🤔🤣 Well anyhoo, carry on my fellow chinese burr samurai 🤺 ✌🎨🎨🎨😁
Thanks Ram....Carve deeper and Carry on ...Thanks Jordy
I have been blessed to watch you improve and evolve over the past few years. Thanks for sharing your evolution, journey, wisdom, and talents durion this time. So kind. Thank you.
Thank you
Jordy, I like that wide face wood spirit you showed late in the video
Thanks rick
My dremal is about dead and the cube will be my next tool I am not as heavy handed as you. You are sounding better I hope you are feeling better be safe
Looks a great bit of kit 🤘 an once you add the price of a flexshaft to a Dremel the RAM is only a few dollar more ehh? I know which one Id prefer an if the Dremel had the cut out feature it'd save lots of broken Flexshafts too I think.
Wicked creation & some great tips the best Jordy tip I use every time I carve is "CARVE DEEPER " cuz it's fooking true ! Try it & find out carving deeper gives you depth & that allows more detail. Hope ya feeling a bit better today bro 🤘
Great video! I use a Strong 202 which I think is similar. Mine will also stall if I get the bit down into a channel too deep. But that's a good feature since it protects the motor.
That Ram looks amazing.
That icube is pretty good, I like it! Good for details!
100%
Your kicking goals Jordy. Nice job.
Your probably tired of hearing me rave about your carvings? Tuff shit!! Two more Masterpieces!! Butta bing Butta boom!! 👍🏼💯
Thanks for showing how to cut the hair which is the hardest part of carving for me.
Awesome review Jordy!
Loved the video, I might be tempted to get one.
Great video and woodspirit brother!! 👊🏽✨ And Hello Just Carve Rob!! 👋🏽 Thinking if you bro, you got my support always. I live with backpain,, I UNDERSTAND 😔
good video 2 great looking carvings thats a purdy cool carver machine you got there thks Bro
cool piece that carver was holding up good it looked like bet it just chews through the cottonwood bark stay safe! Hang in the Just Carve Rob if you read this them back issues take time cant rush it i know the feeling!
Thanks for sharing this really useful video!, 😀
Thank you too
That looks like its real smooth to use Jordy another good carving and don't under rate yourself you a great carver like them others you were talking about their good at how they carve and your good at how and what you carve it's just different that's all cheers mick hope your feeling better
Thank you
Thanks' want one now LOL love the video. will get the 10% thanks again.
Hey Jordy, nice piece of equipment there. I am just starting off and found out that yes, you can break those flex shaft handles the same as I heard that you like to distroy them also. lol. Anyways I I am having difficulty changing the exspretions on my spirits face, expecially the mouth area. I looked at some of your vids but cant seem to get the hang of it. I even tried what you say, "the heck with it" I just deal with it. Problem my ocd kickes in..lol Anyways, I'm going back out and see if I can make some more sawdust. For some reason the alerts for your channels isnt going off for ma anymore. will check into that as I been missing your vids. Thanks and I will get that coffe to ya.
Thank u too just try new things
I like the base carver.Have to say I've never been crazy about Dremel.
Looks a good tool
PS thanks for the Ram cube review
Great video that maybe perfect for me
Fantastic ❤
How ya been Jordy,, Long time no see.... Been dealing with some medical shit ... But I think I won the battle for now !! Yippie
Thanks kevin and hope u remain staying well
Gotta get one.
I recently discovered a Foredom knock off and then micro motors, and realised how noisy Dremels are. Also being left handed I need rotation going in reverse for carving use, something Dremel is not capable of.
But am I missing something here in this video? Brushless? The box is the power supply only right? So the handpiece would be the brushless part, plugging in other hand pieces as shown at the start is nice but if the handpiece has brushes you are no longer brushless.
He’s gorgeous
👏👏👏👏👏 Love.
You can also use the top of his bro car up with the little brat is coming out hair strands
Can we get this in the uk.
But I don’t know either do you know stay safe just carve that’s all I know hahhaha
Hi just carve rob
i want you make face father jesus,bro jordy!! i fine your content
👌
mongaloid hahaaaaaaa
Thanks Jordy, yes, I've been looking at this brand and will be getting the brushless version, a great investment actually. Hope you are feeling a little bit better, you must sort that health out most importantly.
Thank you