KWIKSET Door Handle Install FAST and EASY! - Step By Step Instructions
Vložit
- čas přidán 17. 09. 2021
- This is a Kwikset door handle install instructions that are fast and easy! In this step by step beginners guide I show you unboxing and installing. This Kwikset door knob has the smartkey feature that can be used to rekey all your door knobs to the same key. Installing a kwikset door handle is a DIY project.
🟡 Check out my Amazon store! 👉 www.amazon.com/shop/theexcell... . Here you will find tools and supplies used in my videos. (DISCLAIMER- I am an Amazon affiliate. I get a small commission that help support the channel at no extra cost to you)
🔴 Subscribe for more DIY tips to save a TON of money: czcams.com/users/theexcellentlabore...
Disclaimer: This video is all based on my personal opinion and is for entertainment purposes ONLY. I am not a financial advisor, CPA, attorney, tax advisor, electrician, plumber, housing contractor, designer, or any type of profession to give advice. I am just a consumer sharing my experiences and research. If you do need knowledge for those types of things, I will advise you to seek help for those professionals. - Jak na to + styl
Check out my Amazon store to see my favorite door knob/handles! www.amazon.com/shop/theexcellentlaborer?listId=3VYHA3MFB2XDB&ref=idea_share_inf
We were totally stumped on the handle part. Thank you for pointing out the inside semi circle thing rotates!! Saved us a lot of headache. Appreciate it!
Stoked to be able to accomplish a task like this without my husband’s help! Thank you🎉
Just installed believe it or not my first front door handle. I bought the Kwikset because of the adjustable connecting post on the bottom of the handle, that made it an easy perfect fit. On the old one the handle had been broken for a long time but the door still opened, closed and locked because the deadbolt still worked. I should have done this many years ago. LOL...... I'm an example that you can teach an old dog new tricks. Great video, it helped a lot !
Thank you so much for posting this video! I don't know what we would have done without it because the included instructions are worthless. We also checked out your simple video on the smart key and it made it very easy for us. Thank you
Ganggang, thanks for the secret tips, couldn't have finished without
Great video, my handyman didn’t know the adjustment trick at 6:00 for right side door install. Took out the new kwikset and returned it😢 boo 😊hoo. Going back to Home Depot to buy and install it again.
SUPER HELPFUL on how to switch the exterior handle to fit the bottom latch! THANK YOU!!!
I’m glad I could help you Courtney. Thanks for watching!
That HEY THERE was a nice entrance and .... booom no nonsense and straight to it. You are having fun. always knowledgable and informative and good energy.
I’ll try to have fun making these videos. Sometime in the late night editing gets to you but you just Gotta keep smiling and moving forward. I hope everything‘s going good for you too Thor!
Hey guys it's at 5:52. Thanks man so much lifesaver
Hands down the best video on the subject. Thanks to you, I swapped out my entire door handle and bolt lock. Much appreciated sir!
Thank you for your comment. I’m glad to hear you got your door fixed! You are welcome. Take care!
Oh my Gosh...all I needed to know was how to make that inner curved piece face the right way. And you showed me! Thank you!! Got exactly what I came for.
Holy shit I made the tiniest but arguably worst mistake. I didn’t realize I could pull out the part around 6:07. I’ve spent HOURS trying to make this shit work. I fuckin love this man
Thank you for this video. I was ready to return my door handle because lever was on the other side. A simple pull and turn fixed the issue. Great content, I appreciate it.
Thanks! I was stuck trying to get the cover off with the little white paper. It was a shorter piece that the one you have, however with your video I was able to get it off easily. I spent 20 minutes fighting with it until I found you on CZcams. Thanks. My door is happy with new hardware and so am I.
You are welcome. I’m glad you got your door figured out. Thanks for watching!
You saved me from buying a new handle! Your video inspired me to take apart my door handle to see why it was jacked up. A screw had fallen out. I put it back in and it works. I owe you a beer!
THANK YOU!!! I just bought my first house, and I had to buy a new door knob and I had no idea how to put this thing together. The instructions were so confusing. Your video totally saved the day!
You are welcome. Congrats on your first house!
Thank you! I have been looking all over for a quick 5 second reference you made on how to make the handle switch from right to left and vise versa. Thank you so much!!!
The only I can say is, this video save my life, so thankful 🙏 💖
I’m so glad I could help you!
Thank you so much. This is a video very well done. I can easily follow these instructions. You didn't go too fast. I could clearly see everything and understand your verbal instructions. I'm a widow trying to learn to do some things on my own. I just installed a new fauce, so I'm feeling confident. My husband would be proud of me. 😊
My painter just spent an hour trying to install a new replacement and the instructions did explain how to turn the handle spindle but he missed that - Less than a minute on your video and voila - problem solved. Really appreciate you!!!!
😀
You are welcome James! I’m glad I could help. Good luck with your projects!
That is a Gorgeous front door. The worst is when you have a dark wood front door, and a homeowner installs a yellow of silver door handle.
If anyone comes across a loose door latch or deadbolt and wants a solid repair that doesn't involve glue, stick, putty, or that ugly metal sleeve that ruins the look of your door, ReSecure Latch is that answer. ReSecure Latch sits inside the door alongside the latch, resecuring your loose latch from the INSIDE. Great for property maintenance, home owners, and DYiers.
I have been searching for a permanent solution to repair my front door because the last maintenance guy stripped out my door by overtightening the screws. I tried a larger screw but it didn't last long. I tried finding your product at Home Depot or ACE, but they never heard of you. Where can I go to get one. These are not available on amazon either.
You saved my life. My Girlfriend was mad at me and needed this done to her home. Thank you💯😂
Thank you, Your tip in the video saved my day especially the twisting of key in the handle to other direction to fit in the door. Helpful video
I’ll make videos to help people as much as possible. I’m glad your door handle turned out well. You are welcome!
There were no printed instructions in the kwikset box. This was very helpful. Made it easy.
Im glad I could help!
Thank you so much! 😊
For anyone trying to figure out how to turn the little half moon spindle piece the right way, go to 5:50!
omg thank you so much! And thank you to the excellent labor, I don't know if I am blind or what but I could see that in the kwikset instructions
guess i missed that part of the video, but figured it out on my own.
Thank you!! I can do this myself now. Thank you for sharing your knowledge and for the great detail!
This video just helped me install the same door handle! Thank you!!! Much appreciated!
Hey there,
I’ve never installed. One of these drove me absolutely crazy until I found your video on CZcams. Thank you so much. 😊
That’s for showing how to reverse the handle direction. Was watching videos for hours to find that simple trick
Thank you, I'm going blind, and instructions were in too small of print for me to see. You answered my question (How to extend the door latch) in the first minute. The fastest I ever got an answer on CZcams. Thank you again.
Couldn't have done it without you.
I’m glad I could help you Janet! Be sure to subscribe for more videos to come!
Thank you so much for posting this video…the drawings in the instructions are not very clear in places, but your instructions are clear and easy to follow. We watched your video while installing and it was a breeze compared to how we started off with the Kwickset instructions!
I’m so glad I could help you! Be sure to stay tuned for more videos!
I have this brand door knob and yesterday it popped off the door. Your video showed me how to fix it myself. Thank you 😊
Awesome! I’m glad I could help you out. It is a nice door knob. I have been using it for well over a year. Thanks for watching!
Thank you so much! Somehow I had made it through life without ever replacing a doorknob, but thanks to this video I can check that off my bucket list now. My set had a round knob instead of a lever, but it was still easy to figure out.
You are a citizen… Thank You from Minnesota
Great video.. Wanted to watch it for the bottom door handle.. I usually use a regular screwdriver to make sure it doesn't get over tightened,
This helped a ton. Thanks!
Josh: Thanks for the great video that explains everything so well!! However, some people might have gotten mislead a little when you said (2:25) that you recommend a drill with a 1/4 inch drill bit. Hopefully everyone will realize that in some cases the 1/4" drill bit is too large. For example, when you're drilling the holes for the dead bolt strike plate (10:15), the instructions call for a 3/32 inch bit and a 1/8 inch drill bit. Also, I suggest that before you screw the strike plates down that you close the door and make sure the door shuts and locks properly. I try to avoid having to move a strike plate after it has been screwed down.
you the man !!! installing mine tomorrow you will save me lots of time and frustration :)
I’m glad I can help you Darren. Good luck with your door handle install!
We just replaced the door handle set at my parents house, and watched this video for the step by step process.. with the exception of a couple of differences, this was spot on and so helpful.
Thank you so much! I was very frustrated and with in seconds you charged that to happy! My door was fixed because the spring inside the old door handle was gone.❤🙏🏽
You just saved my relationships with my dad!!
I do what I can. Thanks for watching!
I appreciate you dad.
No problem 😌
I was already going to start a war at home depot . Your video saved my life . Thanks bro😂😂😂😂
Wow man!!! Thank you so much!! 🙏
I bought the same set at Lowes and almost returned it because that bottom lever was the oposite way my door and look how you made it look so easy!
You are welcome. Good luck with your project!
mine was opposite as well, until i realized you can just pull the switch out, turn it, and push it back in.
Thank you so much for your help
You are very welcome!
Excellent video. My door assembly fell apart and I used your video to fix it.
Awesome! I’m glad I could help. Good luck with your project!
My contractor wasted 2 days , 3 trips to Home Depot to exchange lock sets and many scratches on new 3k value door until I showed him this video at 5:58 providing info about wrong key and that saved us all from more damages .
Glad I could help you! Hopefully your project got completed! Enjoy your new door handle!
Well done Good Sir! Thank You very much.
Thank you! I’m glad video was hoping for you. Good luck with all of your projects!
Super helpful, I hate reading instructions. Thank you
Clear and good pace. Thank you.
Congrats on 30 000! Good job Josh
You are the first one to congratulate me! Thanks a lot Amazing Framer! It’s only a matter of time before you get 30,000 subscribers too!
Thanks for showing me how to adjust the half-moon piece on the external handle. I was just about to start taking it apart.
This video was amazing. I changed out my door handle with ease. Your video made it simple. Thank you so much and keep up the great work.
Very cool! I’m glad you got your project done. I appreciate you watching my video. Good luck with the rest of your projects!
Josh--you rock! This was a great video and super helpful! Appreciate you dude!
Thank you for the visual. Made this a easy install
Appreciate the vide it helped a ton…
Great! I’m glad I could help you!
Thank you so much! Was able to install without a hitch!
Great video!!! Exactly what I needed today! Thank you.
You are welcome William!
Thanks for the info.! You saved lots of time.!!! 👏🏼
the tip on how to switch the crescent part inside the handset to the other side by pulling out and then turning it was a lifesaver. no instructions found from kwikset. I've installed plenty of doorknobs but this was my first handle set.
thanks.
Very helpful video sir. I am curious bout your tat on left biceps. Is that a design or does it represent something significant?
Thanks!
You are welcome!
Happy I found this channel.. love the contents..about to watch alot of the previous ones ✌️💯
Hey Alix! This channel is all about DIY and building houses. In hope find my content helpful. Thanks for watching!
@@TheExcellentLaborer 👍💯
Thank you
You are welcome!
Yet another amazing video! Thank you for always putting out videos that help the common homeowner. I'm restoring a 125 year old home and you have been a tremendous help in the process!
I’m glad I could help you restore your home. With a little know how it’s amazing how much you can do. Thanks for watching!
Nice job.
So helpful thank you!!
Your video helped me fix my broken doorknob. I hired someone to install it in 2016 and this morning the handle came lose and I panicked. Thanks to you and yours video, all’s well!
Thank you so much! This was a life saver of a video!!!!!!!!!
You are welcome!
It was very helpful, Thank You
Thank you 🙏
GREAT video with a lot of good insights- perfect! This is an all day project for us home gamers without the video. How do you go through a (more typical) metal door? Any different drill bits or approach? Thanks again!
Thank you thank you🎉
Appreciate the content brother! New subscriber!!
thanks!
You are welcome!
Thank you soo much. You help3d us
Thanks very helpful
Súper excellent. Thank you so much. I'm a new subscriber now
This really help alot 🤙
You are welcome!
5:54!!! Thank you!!
I’m glad I could help you. Thanks for watching and good luck with your door knob install!
This video just saved me from looking like a clueless beta in front of my gf. Thanks bro.
That’s too funny! I’m glad I could help you out. Thanks for watching!
😅
Subscriber # 37.8 k reporting for duty!
Welcome aboard! On this channel we DIY to save tons of money and beat the system 🔨💪🏻. Thanks for subscribing!
Thank u bro.
Thank u
No problem!
so this does not have a lock in the bottom ? just top deadbolt?
Thanks for the vid. Now it's my turn lol👍🔥
Over time, the screws inside the knob can become loose just from day-to-day use. Mine did, to the point that the internals of the knob disintegrated. But thanks to 6:07, plus a bit of detective work, I was able to re-assemble the knob myself!
Dead bolt works. However, when I try and lock the door using the key, it will not turn? Any suggestions? Thanks for the informative video. Appreciate you.
Thanks 🙏 muchas gracias
You are welcome!
Just wondering if the bottom screw should be on the inside vs outside the door? What if someone unscrews it???
5:46 thank you!!!!!!
Hey your video is awesome, but wouldn’t the screw go in the inside? And the cover on the outside? Seems weird to have that exposed on the outside that anybody can unscrew it. In regards to the bottom part of the handle.
At one house, there is a set of double doors, and even though both doors have a kwikset handle and deadbolt, only one of them works; one of them is a dummy, or something like that. Do you have any information on where to buy a set for double doors where one of them is a dummy handle/deadbolt?
Does it work for both left and right door?
Can you make the hole on the door with a screwdriver?
The knob on the deadbolt is loose. How do I tighten it? I see a hole for an Allen key but it doesn't turn
my problem is getting the lever knob from the inside off. there are no screws and i see a little hole on the handle itself, but when I put a very small screwdriver into it it does not come off. Any suggestions on what I'm doing wrong? thanks.
Where’s your wedding ring, handsome?😉