Bring Your 3D Prints To Life - Airbrushing Models (Part 1)
Vložit
- čas přidán 8. 09. 2018
- It's finally here :)
My Tevo Flash Simplify3D Profile: www.dropbox.com/s/l9t0v2hdja8...
Tevo Flash:
Direct from Tevo: geni.us/TevoFlashDirect
Gearbest: geni.us/TevoFlash
3D Prima Filaments: geni.us/3DPrimaSE
Model Printed: www.myminifactory.com/object/...
My Airbrushing equipment:
Iwata Eclipse: geni.us/IwataEclipse
Badger gravity feed: geni.us/Badger
Vallejo Air Paints (pre-mixed): geni.us/VallejoAir
My Merch:
Teespring: geni.us/3DMNmerch
Amazon US: geni.us/MerchAmazon
Spannerhands Sponsor: geni.us/Spannerhands
Magigoo Sponsor: geni.us/Magigoo3DMN
Should you wish to support me, you can also do so via:
Patreon: / 3dmakernoob
paypal: www.paypal.me/jcasha
Want to send me something? go ahead (Normal mail as courier packages get returned):
Attn: Joseph Casha
P.O. Box 12
Constitution Street,
Mosta, MST 9059
Malta
Europe
Sunny Island (VLOG) by Scandinavianz / scandinavianz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/b...
Music promoted by Audio Library • Sunny Island (VLOG) - ...
#airbrushing #3dprinting
-----------
✌✌If you wish to support the channel, you can do so by checking the below links, it's won't cost you anything extra, but the channel will recieve a kickback which goes a very long way ✌✌
Matterhackers: geni.us/MH3DMN
Amazon International: geni.us/3DMNoob
Gearbest: geni.us/3DMNGB
Banggood: geni.us/3DMNBG
Aliexpress: geni.us/3DMNAE
Recording Equipment:
Main Camera: Panasonic Lumix G7: geni.us/LumixG7
(B-Roll) Canon EOS760D: geni.us/CanonEOS
Canon EF 10-18mm: geni.us/CanonEF1018
Canon Lens: geni.us/Canon2470
ElGato Stream Deck: geni.us/Streamdeck
Elgato HD60S Capture Card: geni.us/elgatohd60
Timelapse - GoPro Hero 5: geni.us/GoProH5
Microphone, Rode Filmmaker Kit: geni.us/RodeFMkit
Light Boxes: geni.us/StudioLights
High Speed SD Card: geni.us/SandiskSD - Věda a technologie
I really love this video. This was the next step in my 3D printing path. i'm really happy you started doing this.
Absolutely love this Joe, I think this resonates with a lot of 3D print folks as many prints almost scream "color meeeee". Love it, please continue and go into the depths of techniques.
Great extension to 3D printing! I have been doing this all my life (model building and finishing) and can safely say I am still learning after 61 years!
That look so easy, i just printed nice panorama with castle, going to airbrush now, to realize how hard is it without "art soul", thanks man, your result is awesome
Enjoyed this project, can't wait for more
Great piece. And video. Suggestion I was given once was to never use black or white unless it's the objects actual color, even as a wash. But to use VERY dark blues/ blue-grey/charcoal to blend in for shadows, and slightly tinted white for highlights based on the ambient light of the "atmosphere". If any of that makes sense. Been a long time since I've done any of that. Also you should show making a simple spray/draft box.
Thank you Joe, I feel after watching this I can make a somewhat decent paint job if you step back 5 or 10 feet. Gonna get me some airbrush.
Awesome video Joe. Looks fantastic. Some great tips and advice as always. Bring on part 2
This is so cool. I was just looking at airbrushed after watching Luke Towan’s videos, and then you post this. Awesome!
Nice video and very clear explanation of the basic techiques (washing, highlightinh, shadows)! Can't wait for follow up!
this looks awesome Joe. this is what 3D printing needs.👍 not just print.
Great video, love to finish most of my 3d models and always love to see different ways to do it. Should make more videos like this.
Really nice paint work, I especially liked the earth colours going down on the print, looked awesome :)
You’re an artist, my friend !!
Nice job! Thanks for taking the time to share your techniques. Can't wait for the next one :)
Awesome I just had my first airbrush come in the mail yesterday for this purpose, thanks for the video!
Awesome job, first time watching a video about painting 3d prints. Well done!
I loved it!!
Excellent video! Just getting started in airbrushing/painting and this is a perfect intro. Flowing the dark wash into the spaces between the stones in the wall is something I had not seen before. I would have been trying to paint those crevices with a tiny brush. Keep up the great content!
Thank you, this is the video series I've been waiting for, if you do not have multi colour 3d printers this seems to me to be the next logical step in advancing this superb and very addictive hobby.
This was fun and watch. You must do this more.
I just got my first airbrush kit thanks to you!
Thanks for the video, great job and excellent timing. My airbrush will be showing up on my doorstep tomorrow for just this purpose. I’ve got three dice towers to print and paint and no way am I going to brush them all. I look forward to more videos showing how 3D printing can tie into other hobbies.
Looks Great.
Great video as always. You did a awesome job. Lol now I want start painting my prints. Thank you for all you do.
Kudos thank you for your detailed video. This gives me some confidence
I have an airbrush kit and paint sitting on shelf in garage never opened. I have to take the time to learn, so these videos are just what I needed. Keep it up please!
Great Video Joe, nice results on the model as well !
This is like the 3D version of a Bob Ross video. Great Job! Looking forward to more in the future.
Wow! Great video. Don't stop now! I can't wait to see your next video in this series. Just goes to show that 3D printing doesn't need to be one dimensional.
Great video! Looking forward on seeing more how-to videos like this.
Woah! Awesome video!
Hi Joe. Thanks for video. This was my first time I saw 3d printed model airbrushing actually "live" - don't have lot of information about it. For me are yours instructions absolutelly perfect and detailed. I'm looking forward for new episode :-) Have a nice time and endless inspiration moments of creativity.
Looking good
Learn from the best! Ordered a airbrush set for using on my 3D prints.
Thank you! Bought the cheapest possible air brush set. 3d Printed a Madmax skin to go over my N99 respirator. The bad guy from the latest mad max. His mask. I spent 3 hours!!! Air brushing this thing and finally called it a day. Not 100% happy but cant believe how amazing it turned out. Posted a photo on my IG a few hours ago @Respond_code3
If you still look at these comments on a year old video. Anyway. I thought someone who knew how to airbrush would of been done in a 3rd of the time. Glad to see even pros take hours to do a job. Was looking for tips on how to airbrush. Looking forward to more of your videos.
awesome video. very detailed.
One of your best videos.
Thank you :)
Great work Joe, as a modeler myself I have been looking forward to this video. Keep up the great work. I got my first printer an Ender3 just after your mural was started and have been loving it ever since. Please do another community project soon as I would like to be involved next time.
Amazing Joe. I feel like I could do that where before I thought maybe it was too hard. Good job man.
great job joe
Absolutely awesome Joe! I have the artistic talent of a dead earthworm, so I am really blown away when watching such a talented person bring an inanimate object to life! I'm SO looking forward to more of these. :-)
Thanks Ron :) just slowly getting back into it. I love how relaxing it is :)
superb! i would love to see more videos like this one.
Great video, really enjoyed it.
This is awesome! I've been thinking about getting an airbrush for my print and paint series!
Thank you very much for this video! I learned a lot from it.
I'll be looking forward to the next part.
Usually I primer grey with flat spray paint then do the black wash, wipe the extra off and then start applying color. When applying reds, yellow and orange I use a white base coat in that area first to make it pop. Sometimes I'll dry brush a lighter color on the rocks, grass or whatever to show highlights. Fun video.
Loved this video. Great comments during the video of the whole process with lots of tips. Will start purchasing a airbrush kit now :-)
Good Video! looks real good!
Awsome I just got my airbrush last month and I'm learning to use it and hot to mix paints and thinner and a million thing more keep up the good work ;):);)
Awesome. Just Awesome
Love it joe,ive just spent the best part of £200 quid on Amazon ordering 3 brushes,a shed load of paint and a good quality compressor.
I use to hqnd paint my models when I was a kid many many moons ago.
Really looking forward to getting into airbrushing tho
Looking forward to the followup completion video! :)
You are a very talented man. I want to thank you for sharing this talent with me, with all of us.
Thanks buddy :)
Fantastic. Great Video.
Very well done video! You are a man with multiple talents :P
This was awesome, thank you for sharing. I'm new to 3D printing, and just picked up an airbrush kit as well. I'd like to see more real-time footage (instead of speed up) of you airbrushing and painting with brushes just so I could study your technique some more.
You're a talented man, Joe. Well done. My artistic ability ends at stick figures.
As a fellow hobbyist, a fun video to watch and looking forward to more.
Same here, started painting/airbrushing models.
To bad I can only like this once. Leave us in suspense why don't ya! Patiently waiting on paint job for the structure. Thanks for this series, I'm loving it!
Really nice Joe ! You should do more vids on painting ( Brushing and airbrushing ).
awesome video !! thank you for sharing.
Would love to see more terrain pieces on here.
Super glad I subbed to you a while ago.. love your videos
Very cool. Great audition, btw, lol. Looking to paint the objects I print. This was very helpful. Thanks !!
Nice tutorial.keep it going
The only thing that I would have added to the video is talking about keeping in mind the direction of light when you do highlights and shading. You naturally did it as you painted, but not everyone can do it naturally.
Very very true, it’s a force of habit :) thank you for the suggestion :)
Wow! Very arttistic Joe. Your audition has been succesful, you get the job :-)
Well done Joe I wish I could put the completed model in my fish tank
Great video looking forward for more in the future so better keep making them lol thanks
Just found this. Thanks!
Great job and very informative for me...
Great video. Thank you.
I never thought about buying an airbrush. But you really making me want to 😲😃 This is so nice to watch. Don’t know if I would ever getting it to that level though.
Just amazing....you should do more videos with painting 🤗 ...nicely done
thanks for sharing
Please do more videos like this. I´m very noob and this kind of videos help me a lot. Thank you so much.
Hey, nice video!
Nicely done. I'm always on the lookout for techniques to finish 3D prints. Maybe you could extend this series into 3D print finishing in general. Joel Telling just did an episode with patinas and metal filaments. I think his results would have been better had he used an airbrush to spray on the finishes.
Showing your hidden talents, Joe! Painting stuff never been my thing (AKA, I stuff up it up :-D).
Still enjoyed watching somebody else do it on a 3D print.
Joe, you already know it, but this is fantastic work. You could certainly start a new series on paint finishing of 3d prints. However I should love to see this go a step further.
Make models that are all on the same size base, that way the end result can be to make a big board to put all the pieces together to make a nice big dungeons and dragons type scene.
Wow, impressive :-)
Thanks for sharing :-)
Wow Joe you really have an awesome talent this was really enjoyable video to watch you definitely will get more subs and if you don't then there is something wrong with people watching this video and not subscribe thank you the model looks amazing when painted.
Try doing a before and after comparison at the end of the video to see the whole effect of what you accomplished.
Joe...what a great video! This gives me a bit of confidence to try more painting myself. Can’t wait for the next one! Could you tell us what size needle you’re using in the airbrush? Thanks and please keep doing the painting videos!!
hey
when are u making a complete review of the anycubic chiron ??
Nice work but i would use reference photos and use Createx Colors Airbrush Paint but I do this for a living my style is different and can also dry brush this. You can also use 1 shot paint as well. If you want to get the stones to look real use black and white and turn your air pressure down to like 10 psi and then the paint will come out with a splatter effect.
Great video Joe! I recommend a thin coat of DAP filler (spackle) over 3d prints. It will provide a nice texture and will obscure layer lines. Further, you can add your own texture if you want.
Any suggestions on a good pla filler?
got my gears working, airbrush kit in my wish list. thanks. what would be the best on amazon on a tight budget?
Could you recommend an airbrush compressor? Or what kind of one did you use?
That was great. Funny thing, I printed this same model yesterday because I wanted to learn how to paint it. Great minds I guess! Thank you so much. I have never done airbrush so I need to figure a way to get into it without expending to much cash. Any suggestions?
Where did you find the lazy susan you use?
Hi I have a quick question. My son does some 3d printing and want to learn how to airbrush. What is a good gun to get in your opinion . Also the bemrand of paints. Thank you so much
Great Video Joe !
Only wish I would have got a notification, Thanks YouBoob
Looks amazing. I would have went for drybrushing on some lighter colors but this is amazing. I'd kill for a 3d printer for terrain like this.
Can I plz ask what you did to stop the was running into all the layer lines plz
What is the turntable you are using? Haven't had much luck finding any
"Black is a man made colour." My cat is black... Do I have a paranormal cat ? Awesome video by the way.
If you look under a microscope, that’s a very dark brown ;)
It's kind of true, when sun shine on him, he has brown reflects. But what about coal and hematite and other black crystals ? ;)
They ara still not solid black, they are variants of a very dark colour. True black is only found in paint :)
Well, true black paint (something that does reflect no light at all) does not exist. Vantablack is the "thing" (it's not a paint) closest to real absolute black that has been invented so far ;-) . Anyway great video. I'll try to paint something myself as soon as possible... tomorrow ("Procrastinators unite!")
Don Mega While you are partially correct, Black is not technically a color, it is the absence of color (or absence of light), and since in theory light can not escape the gravitational pull of a black hole, it theoretically exists (or doesn't exist...LOL) .
Hey I know this is 6 days later, but if you haven't heard of this tip, I recommend using a heat gun to clear away the wisps on the 3D print. Only takes a sec for them to disappear so you'd want to hit it real quick
Love the video, project and paint job.
Awesome. Just wondering, could the base coating of the parts be done done with a primer spray can? I use them on my Warhammer 40K models. Never painted a 3D printed piece so I don’t know if that would work. But it just seems to be easier and faster.
It would still work just as fine, only reason I use airbrush is because you can have much more control on the flow of the paint
3DMN thank you 😊
is this Bob Ross :D good stuff man, really enjoyed this, a bit unfocused halfway through though :D
to be honest i edited some parts out because i did feel like i was going all bob ross on the model lol