Bought the 261 C in confidence because of your video. Thanks for this. I used it the whole afternoon and it ran as per my expectations, somewhat set by your video. Thank you so much!
Good basic info for anyone who has never run a chainsaw. I was more interested in the saw performance, however. Well done. I learned long ago to always use a thick pair of pants, and NEVER have your trigger finger in a position where you have trouble releasing the gas ASAP. It can happen, but do not do it. Also be very careful about kickback, especially if cutting limbs head level. You gotta keep distance between your head/neck area and the chain. If the juggler is cut, you are dead.
Good video. Nice saw. Been tryin to buy one down here in Australia. Combination of all the storms and trees down early this year and now Covid-19, it's impossible to find one now. 🤔
@@Carlsmower Thanks.Yeah I put my name down with a dealer. Plus I contacted Stihl Australia. I got this response. "Due to the current difficult situation we all face, STIHL like many other businesses has faced unpredictable and unprecedented sales, along with major delays from overseas shipping. This is very frustrating for us as a business and you as a consumer and we are doing everything possible to get stock from our overseas suppliers". How's your stock situation ?
Didn’t know you guys store is in Washington State !!! I looked up your store . If the owner knows that Skipworths is going to retire . His company is in Shelton ! But it’s up to the owner if he wants buy Skipworths building .
Increase or Decrease the amount of oil distributed to the bar and chain. Certain woods or bar sizes would require an adjustment that could save you some oil usage.
When in winter mode (indicated by a snow flake) additional heat from the engine is allowed into the air box reducing the chance of the carb icing up. Stihl says anytime the temp is below 40°. I have had guys consistently cutting below 35° without the shutter open and not have a problem. My concern is when you fail to switch back and you roast the saw.
I use orange stihl mix oil 2.6 to 1 gallon.I use a good name brand bar oil.I have2- one is 5 years old,the other is 8 months old.Keep it clean,before if really needs it.Otherwise video great.
@@Carlsmower when tested it was found that there was little to no oil in the fuel, carburetor issues as well the fuel ate through 3 oem carb kits, not only that but my dealer would not cover the damages caused
My Canadian subscribers would be insulted if I claimed to be one of them. That said when I shot this video it was specifically for a Canadian customer. Interesting
I did fancy one of these, but after reading many of the problems people were having, I decided not to bother. The problems were all similar and yet Stihl has been pushing out this machine with no fixes. I have Stihl equipment, I'll just stay with my MS180 thx. People should read up on this before they spend their money.
We have sold hundreds of the MS261CM chainsaws and I can say our customers are pleased! The only real complaint I have heard is hard start when hot, I have found that letting the saw idle for 5-10 seconds prior to shutting it off. It seems as though if shut off right after a cut the brains are still in high speed.
@@Carlsmower That's fair enough, I am going by the many issues people have posted on the net, they can't all be wrong. Seems the 'Mtronic' is what causes most of their issues with not restarting or dying whilst cutting. As I said I have Stihl equipment and was disappointed to read this stuff and it has put me off.
You're thinking about the MS261CM. The MS261 is a different machine. It doesn't have all the electronics on it. The 261CM is the model to avoid. I bought the plain 'ol MS261 specifically because it isn't burdened with "modern" electronics. Runs like a charm
Bought the 261 C in confidence because of your video. Thanks for this. I used it the whole afternoon and it ran as per my expectations, somewhat set by your video. Thank you so much!
Great video,I just bought this saw new 3 days ago and my dealer didn't go over it nearly as good as you did,thanks.
We go over all of the details with our clientele so they know exactly what they're operating. Glad you found our review helpful!
@@Carlsmower 140 psi good compresion 372 xp oe?
Yes that is a solid number. But sometimes you can get a false reading. Have you pulled the muffler and checked the cylinder and piston visually?
u r best tutorial for ms261cm!!! nice!!
Thanks for the feedback and the subscribe.
Best ‘how to’ video on YT!! Sad but my dealer knows nothing about what they sell?? Keep up the great videos!!!! 👍🏼👍🏼
Thanks tango165 glad we could help. Hopefully other dealerships can use these tools to help their customers too.
Not really sure why I'm watching this video, as I have an 028, 391, and 661, but you did great presenting this.
Thanks for the review looking forward to a new purchase. I love the stihl platinum bar oil with motomix. Goes hand in hand best of the best.
thank you! informative, concise, and easy to understand. 💯👌
Any other products you want to know about?
Great video! Thanks for the overview!
Glad to help
Good basic info for anyone who has never run a chainsaw. I was more interested in the saw performance, however. Well done. I learned long ago to always use a thick pair of pants, and NEVER have your trigger finger in a position where you have trouble releasing the gas ASAP. It can happen, but do not do it. Also be very careful about kickback, especially if cutting limbs head level. You gotta keep distance between your head/neck area and the chain. If the juggler is cut, you are dead.
Good video. Nice saw. Been tryin to buy one down here in Australia. Combination of all the storms and trees down early this year and now Covid-19, it's impossible to find one now. 🤔
Can you have your local Stihl dealer order you one?
@@Carlsmower Thanks.Yeah I put my name down with a dealer. Plus I contacted Stihl Australia. I got this response. "Due to the current difficult situation we all face, STIHL like many other businesses has faced unpredictable and unprecedented sales, along with major delays from overseas shipping. This is very frustrating for us as a business and you as a consumer and we are doing everything possible to get stock from our overseas suppliers".
How's your stock situation ?
Have you got one yet?
Very helpful thanksfor the video
Our pleasure!
Good video brother 👍🏻
Great video
Thanks Cascade Retriever
Didn’t know you guys store is in Washington State !!! I looked up your store . If the owner knows that Skipworths is going to retire . His company is in Shelton ! But it’s up to the owner if he wants buy Skipworths building .
Ethanol free gas is hard to find in many areas. I have always used the 93.
That’s the next best thing
Is that 20" bar?
Yes 20 .325 bar
I have this saw. Works great and starts well when cold....but not so good after it is hot and after refueling. Why is this so?
I run vp t2 fuel is that ok to keep running in my 261 I always run it in my 362 and my 660 they seem to like it just wondering if its ok for 261?
Very informative video. What is the proper break in procedure for this saw?
I was told to Make sure it’s warmed up, and then put it to work! Keep it working and under a good load when at WOT. Don’t just goose with no load.
Cool thanks a lot
Bar oiler adjustment??
Increase or Decrease the amount of oil distributed to the bar and chain. Certain woods or bar sizes would require an adjustment that could save you some oil usage.
@@Carlsmower I meant you missed that feature in your overview.
about the equal cutter lengles
I hear that their is a winter/summer plastic air tab inside the cover ?!? Can you explain this ?
When in winter mode (indicated by a snow flake) additional heat from the engine is allowed into the air box reducing the chance of the carb icing up. Stihl says anytime the temp is below 40°. I have had guys consistently cutting below 35° without the shutter open and not have a problem. My concern is when you fail to switch back and you roast the saw.
Can i purchase a new 261 with a regular carburetor and not a electric carburetor.
Stihl does make a Stihl MS261 "standard"
How do you identify if a 261 has a regular or electric carb?
I use orange stihl mix oil 2.6 to 1 gallon.I use a good name brand bar oil.I have2- one is 5 years old,the other is 8 months old.Keep it clean,before if really needs it.Otherwise video great.
I've had two saws get wiped out buy that stihl motomix, premium fuel and stihl oil(Castrol go!) Has never caused issues
There is something fishy going on.
@@Carlsmower when tested it was found that there was little to no oil in the fuel, carburetor issues as well the fuel ate through 3 oem carb kits, not only that but my dealer would not cover the damages caused
How long is the bar that is on the 261????
Generally it is sold with a 20" Bar & Chain. Some areas of the globe and US go shorter.
is is not an overview, of the 261 its an intro to chainsaws.
🤘🏻
Are you Canadian?
My Canadian subscribers would be insulted if I claimed to be one of them. That said when I shot this video it was specifically for a Canadian customer. Interesting
I did fancy one of these, but after reading many of the problems people were having, I decided not to bother. The problems were all similar and yet Stihl has been pushing out this machine with no fixes. I have Stihl equipment, I'll just stay with my MS180 thx. People should read up on this before they spend their money.
We have sold hundreds of the MS261CM chainsaws and I can say our customers are pleased! The only real complaint I have heard is hard start when hot, I have found that letting the saw idle for 5-10 seconds prior to shutting it off. It seems as though if shut off right after a cut the brains are still in high speed.
@@Carlsmower That's fair enough, I am going by the many issues people have posted on the net, they can't all be wrong. Seems the 'Mtronic' is what causes most of their issues with not restarting or dying whilst cutting. As I said I have Stihl equipment and was disappointed to read this stuff and it has put me off.
That’s where the idle down comes into play. It allows the M-Tronic to recalibrate.
You're thinking about the MS261CM. The MS261 is a different machine. It doesn't have all the electronics on it. The 261CM is the model to avoid.
I bought the plain 'ol MS261 specifically because it isn't burdened with "modern" electronics. Runs like a charm
can i do a video for you in a review channel style
When?
@@Carlsmower well this was 10 months ago and now i forget what i was even gonna do
Where is your store located?
Ferndale Washington
Where do i get ethanol free fuel?
Worsham's Lawn Service www.pure-gas.org is useful!
Currently own 6 working saws... I'll buy another Stihl when they lose those cheesy oil and gas caps...husky 562xp is my fav
562XP is a great saw. Are you happy with the Husqvarna flip caps?
Don’t keep your chain that tight.
It’s too expensive
Nooooo no noo electronic
Gotta say we’ve had a great track record with them over the last 10 years.