Preview of VAG Dash Editor for eeprom 24C32 & 24C64. This is a free application by Mehran. Download link : drive.google.c... Download link 2 : drive.google.c... If you like Subscribe
hi i'm facing little problem after writing new eeprom with cluster mod the water icon keep beeping and flasing if i backup the ori file the problem dispear can you help me with that
Hello, thats the sw number from dump file, the pin code you need for vcds is not shown there, normaly if you have tools to read this type of dash ( epprom ) via obd PIN and CS is shown there.
That deppend on what tools do you have, VVDI2, OBDStar, Autel508/608 can easy read via OBD if you have a working key, if not you need to set eeprom into service mode and read it. Also can be read with programmers on bench ( Smok, VVDI Prog, others ). If you want to program key, pin code its not enough on 4th immo generation.
I have tested links are working the problem is at your side, drop me an email at address from about on page and i will send you attached amd also links. Other way do a google search “vag dash editor” and you will find the drive2 pages but also there are the same links.
Hello,i have a problem with ABS module, can i change type ABS type for find a solution?
hi i'm facing little problem after writing new eeprom with cluster mod the water icon keep beeping and flasing if i backup the ori file the problem dispear can you help me with that
Hello, can you please confirm the sw code (we see here sw: 0406) we see on top right is the dashboard PIN we can use in vcds? Thanks
Hello, thats the sw number from dump file, the pin code you need for vcds is not shown there, normaly if you have tools to read this type of dash ( epprom ) via obd PIN and CS is shown there.
Thanks a lot…. Do you have any advice or even better a link for a tool able to show me the pin? Thanks in advance
How can I get login\pin from 24c64 dump?
Immo data its not stored on eeprom, it is located on MCU.
@@UnixCoDElectronics how can I access MCU data??
That deppend on what tools do you have, VVDI2, OBDStar, Autel508/608 can easy read via OBD if you have a working key, if not you need to set eeprom into service mode and read it. Also can be read with programmers on bench ( Smok, VVDI Prog, others ). If you want to program key, pin code its not enough on 4th immo generation.
Hello! Please, provide a download link, The previous one does not work.
Download link it’s in description of video. If is not working let me know
@@UnixCoDElectronics not working.
@haoslug6642 Links updated, added oficial link to folder
@@UnixCoDElectronics Sorry, but the download link is - Error 404...
I have tested links are working the problem is at your side, drop me an email at address from about on page and i will send you attached amd also links. Other way do a google search “vag dash editor” and you will find the drive2 pages but also there are the same links.
Jaki programator potrzebuje ?
If you read on table any eeprom programmer, if you read via obd2 ( vvdi2, abrites, smok and many others )
Is this supporting 93__46
No, is only for VAG dash with 23C32 and 24C64 eeprom ( eg Golf 5, passat b6 and up from this )
𝙥𝙧𝙤𝙢𝙤𝙨𝙢 😪