BMW E61 530d 231hp M57TU2 306d3 engine noise Knock Tipping
Vložit
- čas přidán 30. 12. 2016
- What is it noise? Injector? Crankshaft bering?
First I see under the cylinderhead cover, check the timing chain, the chain is good! The alignment elements and rocker arms are good.
I instaled back injectors, and the first start the engine sound was good, after 40-45 mp noise is back.
Tisztelt márkatársak!
Tanuljatok az Én esetemből, a DPF-el szerelt autók esetében a hígult motorolaj nem tud elég kenést adni hajtókar csapágyaknak, ezért elkopnak. A jelenség a 6-os hajtókar csapágynál kezdődik, és ahogy haladunk az olajszivattyú felé úgy kevésbé látszik. Az Én autómban 250eKm körül lehet, és a jelenség ekkor jelentkezett. A bontott alkatrészeken amiket vettem hozzá, is látszódott már, pedig abban 200eKm alatt van a futásteljesítmény. Én az autót Németországból hoztam, és ott valószínűleg betartották a 30eKm-es olajcsere periódust, szerintem ez okozhatta a problémát. Az autó jövőhéten készül el, a költségvetés 700eFt lesz kb.
Javítás:
Hengerfej felújítás, szelepszár szimmering csere, szelep becsiszolás,
Blokk síkolás
Gyűrű csere, hajtókar csapágy csere, vezérlés csere, első hátsó főtengely szimmering
Hengerfej tömítés + csavarok
Tömítés készlet
Ha kérdésetek van keressetek meg bátran akár itt akár az uvegesco@gmail.com címen.
A Dadogos hangon kivul Mas is feltunt?
Christian Andolini
Menet közben kb 90-100Km/h sebességnél lassan hangosodó kopogás hallatcódott. Megálltam vele, abból tudtam, hogy nagy baj van, hogy a kopogás a fordulatszámmal azonosan változott. Ha tovább megy vele valaki, akkor kitöri a blokk oldalát.
Kopogás=ütés.
Eltöri a főtengelyt egy idő után :)
what sound are you referring to? the ticky high pitch noise? or the rumbly low sound?
Hy, we faind the problem, the rod bering in the 6 cylinder is broken. The 5 and 4 was bad! I bought a used short engine with cylinder head. If you bay used car with this engine under 250.000Km, than You most check the rod berings! BMW M57N2 (TU2) 306d3 with DPF engine the diesel oil is mingle with engine oil -----> engine rod berings wear out.
Hi, that is exactly the sound my 2007 730d is making with just under 200k kilometres, full BMW service history. Was the crankshaft too damaged to replace just the bearing shells? Thanks
Hi, my crankshaft was damaged, but repairable. I bought a used engine with original size crankshaft, and change the crankshaft. You must choose, repair the crankshaft or buy original size.
If you choose the repair you have to know the repair crankshaft is weaker than the original size. You can buy extra size rod berings +0,25 or +0,5:
www.realoem.com/bmw/enUS/showparts?id=HM21-EUR-06-2007-E65-BMW-730d&diagId=11_3833
If You choose the original, you have to buy used or new. Here the new:
www.realoem.com/bmw/enUS/showparts?id=HM21-EUR-06-2007-E65-BMW-730d&diagId=11_3460
I changed : Crankshaft (used), rod berings (KOLBENSCHMIDT), piston rings (mahle), 1 conneting rod (used), timing (swag) and all seal.
Now You don't start the engin, because the bering tightens, broke your engine block.
My engine repair was ~ 3500Eur
Thanks for the help - I too found that the cylinder 6 bearing was gone - luckily the crankshaft isn't damaged so I just ordered a set of bearings to replace all of them.
Gyorgy Üveges hi I just cleaned the DPF AND ITS LOOK LIKE DOING SAME LIKE THIS ONE DO YOU think during the cleaning they did something or whyol is it please many thanks.
Hi, was the sound always this loud and bad or was it building cause my engine makes a weird sound too and the garage told me it maybe the rod bearings but the sound from my engine is not this bad not even close.
How often you change your oil?
If You Bay newer BMW with disel engine, you must change the timming and rod bering. In this regio to be special BMW service, where do this. I used Mahle piston ringes, and Kolbenscmidt bering. This two campany are made the original BMW parts.
Did you found what was the knocking problem ?
Szia. Meg lett a hiba oka ?
Solution plizzzzzz
No, the car is repairing. We found a steel plate like a bigger coin. I thing this steel is coming in the timing. Next week I will see the problem, I will be write here.
Ok, give a feedback what was it. Thank you
I write the answer!
Gyorgy Üveges what was the problem
Injector problem
...lagerschaden!
it does me too. What was that sound?
Hali! Ez a hiba csak a TU2 (alu blokkos) motoroknál jellemző csak, vagy a korábbiaknál is előfordul? Köszönöm
A DPF-fel szerelt összes dízel modellel előfordulhat. Ha jól tudom a d2 motorok fele már DPF-fel szerelt, a d3 és a többi DPF-és.
Szívóhossz állítót le kell vakdugózni, meg cserélni az olajat 10-15eKm-enként.
J’ai le même problème bmw 530d 218ch parce que c’est un problème injecteur
I thought the m57 engine was bullet proof. I thought the n57 was the bad one.
broken injectors
No, rod bering at 6 cilinder.
Felső tömítés szett megoldja simán sztem
Claquement piston moteur cassé
Traducir español
Helló. Hát nekem is hasonló, de csak amikor tobb napig áll ès első inditásra csak, de olyan hangos kopog zorog meg füstöl is kicsit jobban es aztan amire bemelekszik minden megszűnik... most volt lanc csere... hengerfej csiszolas szelepszar szimering csere... vizpumpa, filterek... szijjak főtengely szimeringek... a fotengely vègen levo szijtarcsa szoval szinte minden... most hajtottam bele 4ezret es kopog... 3000euro volt a javitas... ugy hogy kicsit ideges is vagyok...ha esetleg van valami otlet mi lehet meghalgatom mielott mesterhez megyek vele... mert mar 1ik mesterben sem lehet megbizni...
Injektor hibás
Have the same noise what was yours coming from?
мой мир 51 работает намного приятнее
т9 достал!!!! мой м51 работает намного приятнее