Narrowboat Panel Painting - Part Two, Priming

Sdílet
Vložit
  • čas přidán 7. 09. 2024
  • Part two of our Narrowboat Panel Painting series. In this episode John explains how to apply primer to the previously prepared steel surface.

Komentáře • 13

  • @westers1514
    @westers1514 Před 4 lety +1

    Great to see you back posting; loved watching your "How to paint" series.

  • @zenzeypher
    @zenzeypher Před 3 lety

    These videos are gold. Thank you.

  • @watergypsydaveo128
    @watergypsydaveo128 Před 4 lety

    Awesome geezer.. I've just sorted my knackered roof out just following your instructions over the years. I've just finished priming. Hey!! You wanna see the pics before and after, they are super cool. Cheers John

  • @johnsharman7614
    @johnsharman7614 Před 3 lety

    Very interesting and helpful vlog some very good advice and tips 👍

  • @risingfromthedeepuk2401

    John what are the benefits of using International brand Yaght Primer over Red Oxide?

  • @llessibm
    @llessibm Před 4 lety

    Thanks for clearing up the point on sanding down, makes perfect sense. You mentioned 2 types of primer, the aluminium and the zinc phosphate but you didn’t mention two pack epoxy - are there issues with the two pack that mean that the rest of the paint process has to be done differently?

    • @JohnbarnardBiz
      @JohnbarnardBiz  Před 4 lety +1

      Yes using two pack you have to be careful as overcoating with single pack products can be lead to problems and in a lot of cases you will have to rub down the the two pact to gain a key which in turn reduces the flim thinkness

    • @llessibm
      @llessibm Před 4 lety +1

      John Barnard Ltd. - thanks John - my sail away came primed in two pack which is rather thin in places as rust spots are showing through - guess I’m going to have to rub these areas down as well as the rest of the boat and start again with the Aluminium based primer - thanks again for your videos and comments

  • @paulshrew
    @paulshrew Před 3 lety

    do I need to put an undercoat over sanded old paint?

    • @JohnbarnardBiz
      @JohnbarnardBiz  Před 3 lety

      I would suggest 2 coats to give you a good base for you top coats

    • @paulshrew
      @paulshrew Před 3 lety

      @@JohnbarnardBiz thankyou, there are a few scratches, down to the original undercoat if i cant sand them down level what do you suggest me fill them them with or will 2 coats of undercoat do the job. Im just want to paint a top coat within the coach lines

  • @davidbagley1783
    @davidbagley1783 Před 3 lety

    What is the name of the pimer