@@Highspeed2322 It is what it is and does need any of that because as it is is even more because less of people saw it, so it's more underated, understated. Passion and $$ are oposites
I converted the bulbs to HID, super bright at night so people can see me coming haha and as for the running lights there i changed them to red giving it that more serious look. thank you for the comment, be sure to subscribe!
I think in total i have $2800 in the whole bike. keep in mind tho i bought it with a blown engine and it was trashed out haha. But yes i lowered it 2 inches. thanks for the love bro hope yours turns out beautiful. when you get it done send me some pictures of it xmsracing2323@gmail.com
Hey boss my 04 r1 is leaking oil from the oil pan it’s coming from that one hole in the middle of the pan. Any idea would cause that ? At first I stripped my oil pan drain bolt so I had to replace the pan with a new one and when I did that it fixed the leak from the drain bolt but started leaking from that middle hole I don’t know what to do
Ok so that oil pan has a sensor in it that requires an o ring around it most likely the o ring is dry rotted. At the beginning of this video if you watch closely I drop the sensor down into the oil pan before installing it. It’s that sensor
If that’s not the problem the it’s literally just gasket for the oil pan it self. And it just appears to be leaking for the center hole. I’m actually a certified Yamaha technician if I was in front of the bike I could have that fixed in about 20 minutes. Try all that if that doesn’t fix it then maybe a small crack has formed in the aluminum. If that’s the case let me know, and you can send it to me and I’ll tig weld it for ya no charge.
@@Highspeed2322 wow I’m definitely going to try that is there anyway I can send you some photos of it ? Just to show you exactly what’s happening with it
@Highspeed2322 there is a weep hole in the center of the oil pan. If the orings have failed for the tube that goes from oil pump to the pan it will weep oil out of this little hole in the center of the pan. Has nothing to do with sensor oring certified yamaha mechanic 😂
unfortunately the bike is gone. A F-250 pulled out in front of me at about 40 mph didn't get hurt too bad just flew like a bird haha.... but definitely could have been worse thanks for watching be sure to subscribe i make all kinds of builds. my build tend to cost a lot of $$$$ so they're spaced out a while but when i do upload its badass!
Man I honestly couldn’t tell you. I bought it off eBay and painted it all myself. So I guess you could just say it’s a basic white none painted plastic fairing kit for 2006 Yamaha R1. I painted everything white first then applied all the decals that I had custom made btw. Then cleared coated over everything.
![2004 Yamaha R1 Superbike - [ First Ride and Review ]](/img/n.gif)
The best looking generation of the R1
07=08 is the best of the best
Sorry I just realized the comment section has been turned off since launch date, anyway hope you enjoy the build.
Awesome! No Words,Just Emotions & Effort. Your Joy is our Joy! Thanks
been waiting for someone to really appreciate it like i did, Thanks man
Insane.
thanks
I love it gave me so many ideas for my new bike thanks 🙏🏻
deserves more views and likes no doubt.
I thought so too man but for some reason this video just never really took off. I guess maybe share it for me thanks Brother 👍🏼 glad you enjoyed it
@@Highspeed2322 It is what it is and does need any of that because as it is is even more because less of people saw it, so it's more underated, understated. Passion and $$ are oposites
What did you do to change the headlights? They look amazing! Great build.
I converted the bulbs to HID, super bright at night so people can see me coming haha and as for the running lights there i changed them to red giving it that more serious look. thank you for the comment, be sure to subscribe!
hey hey.. Im about to pick up an 06 as well and I saw this. fking beautiful bro. May I ask how much it cost you to rebuild? also is the bike lowered?
I think in total i have $2800 in the whole bike. keep in mind tho i bought it with a blown engine and it was trashed out haha. But yes i lowered it 2 inches. thanks for the love bro hope yours turns out beautiful. when you get it done send me some pictures of it xmsracing2323@gmail.com
@@Highspeed2322 do you remember what size your rear tire? Thank you
@@dennisl4961 190/50/17 is stock tire size, I run a 190/55/17..
Hey boss my 04 r1 is leaking oil from the oil pan it’s coming from that one hole in the middle of the pan. Any idea would cause that ? At first I stripped my oil pan drain bolt so I had to replace the pan with a new one and when I did that it fixed the leak from the drain bolt but started leaking from that middle hole I don’t know what to do
Ok so that oil pan has a sensor in it that requires an o ring around it most likely the o ring is dry rotted. At the beginning of this video if you watch closely I drop the sensor down into the oil pan before installing it. It’s that sensor
If that’s not the problem the it’s literally just gasket for the oil pan it self. And it just appears to be leaking for the center hole. I’m actually a certified Yamaha technician if I was in front of the bike I could have that fixed in about 20 minutes. Try all that if that doesn’t fix it then maybe a small crack has formed in the aluminum. If that’s the case let me know, and you can send it to me and I’ll tig weld it for ya no charge.
@@Highspeed2322 wow I’m definitely going to try that is there anyway I can send you some photos of it ? Just to show you exactly what’s happening with it
@Highspeed2322 there is a weep hole in the center of the oil pan. If the orings have failed for the tube that goes from oil pump to the pan it will weep oil out of this little hole in the center of the pan. Has nothing to do with sensor oring certified yamaha mechanic 😂
@@stevnger how do I fix that problem boss
Turbo coming soon?
unfortunately the bike is gone. A F-250 pulled out in front of me at about 40 mph didn't get hurt too bad just flew like a bird haha.... but definitely could have been worse thanks for watching be sure to subscribe i make all kinds of builds. my build tend to cost a lot of $$$$ so they're spaced out a while but when i do upload its badass!
@@Highspeed2322 guess you "learned to fly"
What faring kit is that
Man I honestly couldn’t tell you. I bought it off eBay and painted it all myself. So I guess you could just say it’s a basic white none painted plastic fairing kit for 2006 Yamaha R1. I painted everything white first then applied all the decals that I had custom made btw. Then cleared coated over everything.