Program THIS Philips 8 Device Universal Remote to ANY Device!
Vložit
- čas přidán 25. 06. 2024
- Video tutorial on how to program this 8 device Philips remote to most TVs, DVDs, Audio, Streaming device etc. In depth tutorial covers most scenarios. Thanks for watching.
Link for the Codes: www.usa.philips.com/c-p/SRP94... - Jak na to + styl
I just got my Sanyo TV successfully paired! The video I watched before this wasn’t helpful at all nor were the instructions included with the remote. You sir were straight to the point, easy to follow, and a true lifesaver!! God bless!!! Thank you!! I even got my Roku paired!!
Thank U so much for the encouraging comment.. :-). You're welcome.. God bless You too.
Bro this saved my life!!! I bought a $500 tv last Black Friday but one day I got drunk and lost my remote and I bought a universal remote but I couldn’t get it to work until I saw this video, thank you!!!!
Awesome! Glad you got it going again... 🙂
The first video that helped! Thank you!!!
I'm so glad! You're welcome... :-)
Thank God I’ve been searching for the remote code to my tv for hours and your segment on automatic code finding helped me find it in minutes thank you so much
Great to hear! Thanks for the great feedback.. :-)
I have been trying to set up my TV all day . Then i came across your video tutorial . Waw thanks aloot finally it worked with the direct code input for my JVC tv 🙏
Thank you so much! You're welcome... 😊
Way better than the directions they give you got it on my first try as well. Sitting and just watching it from 3:45 to 503 is perfect for the other tv options
Awesome.. You're welcome.. 🙂
I was confused at first from using the auto code finder but I realized that after the remote turns off the tv just use the volume up button until it turns back on and once it does to push the tv, aux, etc again to save the code, it’s just like you said thank you!
I'm glad you got it working! You're welcome.. 🙂
@@JLPicard440 this comment worked thanks
Thank very much!
The Video help me a lot!!👍😊
Excellent! You're welcome.. :-)
Thank you SO MUCH!!!!!!! The directions that came with the remote were absolutely useless and hardly explained anything! I so greatly appreciate you for posting this video!!! You rock!!!
You're welcome!... :-) and Thank U...
Their only two code to the tv neither one of the works
Can you give me more help ??
Thank you so much for the opportunity to help out it really helped 😊
You’re welcome 😊😊
THANK YOU SO MUCH FOR A VERY HELPFUL VIDEO!!! 👍🏻👍🏻👍🏻 Well done sir
You're welcome! Thanks for the comment... 🤓😃😃
Bro you are a life saver,I literally watched until
You did Vizio and then I did it and worked!! Thank you!!
Glad I could help. You're welcome.. 🙂
Kinda gotta little confused on the auto-instructions but figured it out, and saw it was like you described when I got it done.
Excellent! 😎😎
Thank you so much for this video. It was very helpful.
Awesome! You're welcome.. 😊
Thank you a lot that was helpful!!
You're welcome... :-)
Thank you man, this very much helped :)
Glad to hear it! You're welcome... 😊
Thank you the manual don't bring that number for the Vizio, always is good to have this kind of video.
Excellent! You're welcome.. :-)
Just tried the Auto Code Search, works perfectly! Thanks for this Video!
Awesome! SO glad I was able to help... 😀
Although I saved my tv remote code on my phone, I was having a problem with programming ( did not save the manual 🤦🏾♀️🤦🏾♀️)your video helped me with first try.Thank you!
Glad I could help! You're welcome... 😀
Excellent presentation! NO BS and right to the point. Easy to understand! Thank you for posting!
Thank U!... :-)
I LOVE THIS MAN! thank you!
Thank you and you're welcome... 😀
this really helped man thanks
Glad it helped.. You're welcome.. :-)
Thank you so much! It just happens that I have a Vizio, and omG your vid helped!
That's so excellent! You're welcome... 🙂
Really thank you ,it worked 😊
You're welcome!
Just tried this🔥thank you! Worked first try!!!
Awesome! Glad I could help. You're welcome.. 😀
Thank you so much
You're welcome... :-)
That helped a lot thanks!!!
Glad to hear it! You're welcome.. 🙂
You the goat man thanks
Happy to help
Thank you....❤
You're welcome 😊
Thank you 🙏 u helped me
Happy to help😊
Great job. Mine worked completely in less than a minute. Thank You.
Glad it helped
Thanks very helpful 😊
You're welcome 😊
Thank u so much this video and with all the explanation that u give is great 😱😱😱
You're welcome! So nice of you🙂
You are the best!!! I recommend the automatic set up, it’s so easy! The manual didn’t work for me. ⭐️⭐️⭐️⭐️⭐️
Thanks for the tip! Glad I could help.. 😊
@@JLPicard440 Oh The okay bottom doesn’t work. Do you know why?
@@YeniRamirezMejia Did you try all the codes on the list?
so far nothing is working. I tried the codes for my samsung tv but they didn’t work. 😢😢 But of course this video is great! Straight to the point
Thank you for the feedback! Samsung should definitely work, that is a main line brand. IF it's a smart TV, then only basic functions will probably work, but it should still work.
This just saved my ass. Thanks man, 5 Stars
You're welcome... 😊
Thank you for Vizio code my universal remot didn't have one!!!
You're welcome!
It’s work now thank you
You're welcome!😊😊
Thanks so much!
You're welcome... :-)
Yes! Thanks! It worked!
@@mrs.aikens8074 Excellent!.. You're welcome.. :-)
It worked!!!! Thanks
You're welcome!
It worked for me! thanks
Sweet! Thanks for the great feedback and you're welcome..
Thanks for your help
Happy to help
Great video!!, thank you!!!
You are welcome!
Great guidance 💯🫡
TYSM!... 😀
This worked like a pro
Excellent! Thank you.. 😊
Thank you! It works!!!!
You're welcome!
so helpful
Glad you think so!
Thank you sooooooooo very much!!!!
You're welcome!
Thank you!!!
You're welcome!🙂
Thank you
You're welcome... :-)
I need help. I'm currently using a Philips 6 Device Elite Backlit Remote Control with a Magnavox V-Série classe 29 tv. I cannot figure out how to change the screen size. Can you help me out?
I am not familiar with that TV, but does the remote give you access to the menu? There's usually an option for aspect ratio within the menu. If there's no menu access have you tried all the available codes?
Thank you for this. I have almost everything working, but I can't figure out how to view and use the list of shows recorded on my DVR (AT&T).
There may not be a button for that one. What's the button called on the original remote? You might try other codes either through the code list or auto code search to see if you get one that's better, but you might need a teachable remote to get that working..
Thanks 😊 my Sony 📺 is working
Excellent! You're welcome..
How did u fine your tv code?
Thanks so much
You're welcome!
Does this remote work for a magnavox TV?
It should... :-)
Will this work with sharp aquos lc52e77un, samsung tv qn65q7drafxza, klipsch sound bar sb3, vizio sound bar sb2920-c6 and roku stick? Can you please share then compatibility list?
HI, I have no way to know if it'll work with those specific model numbers. The book only gives codes for brands. I think the roku stick might be the one that it won't work on, because I think that goes behind the TV and plugs into the HDMI port directly. This remote is IR only and the signal probably won't reach behind the TV, and I'm not sure that they built in a IR sensor into that unit... but the other units it should work fine.
Take a Bath Productions I am pretty much confident on sharp and Samsung TVs but do you see klipsch sb3 sound bar in the manual?
Love u 😍 THANKS
Awww... You're welcome 😊
Does this method work for philip home theater (HTD3510/98)? My original remote is lost, so i buy another remote philip home theater ( dont know the series ) the seller says it will work because remote philips for home theater but it cant be used. And where is i can get the code?realy need help
Hi, I’m not sure which remote u got. I have a Bose remote and it’s RF only.. if your Phillips is like that, it won’t work.. did u buy a Philip remote for home theater? If so there’s probably no codes,, it should’ve worked out of the box..
Do you know what means when the universal remote power button keep blinking 2 or 3 times and dont connect to eny device ? Thanks.
If you're doing it correctly, it could be you're entering a bad code. Or it could be the batteries aren't that fresh..
@@JLPicard440 Hi friend, it was that the batteries were dying and i got confused and trow the remote on the trash. I remember back in the day when the batteries died i put them on the fridge and they work for like a month, but today remotes stop working even when the batteries still alive. Talking about technology going backwards.
I know this is an old video, but does anyone know if there a way to set a primary power as well? Similar to the primary volume.
I don't believe so. Some remotes can set a macro when you push one button it turns everything on, but this one doesn't have that capability
Will it work on a vintage Phillips AS 645 Stereo
If the stereo is made for a IR remote.. it might, but you'd have to program it to see. IF there's no codes, try a auto code search.
Thanks for video but didn't get the info i needed. I just bought this because said compatible with sound bars. I have a sony sound bar was able to find code and program it turns off and on the soundbar but i cant select what function regarding analog, cox, opt, or Bluetooth
Its always on optical i want to use analog and at times Bluetooth anyone know how ?
There may not be an option to control those kind of details. Have you tried different Sony codes if there's more than 1?
I have a samsung smart tv as well, is there anyway to get the smart features to work? Volume channel and power work but nothing else
This remote isn't really made for the more complex features. What you need is a teachable remote for the more advanced features.. Of course you'll need the original remote to be able to teach those features to a universal..
Trying to work my DVD Magnavox. Nothing works trying str button even though I have no clue what it means and also tried the aud button with no luck
It should work... if you've tried all the codes.. make sure your batteries are good. if they are, try the auto code search.. might hit on something that works.. Does it work ok on other devices, TV, stereo.. etc?
TYSM
YW
I have an Sharp Aquos, LC-46LE810UN. S.N. 004829259 Liquid Crystal. Will it work on this TV? Thank you in advance!
I have not way to know if it'll work by model number. I know sharp is a mainstream brand and I have used these with sharp TVs. I'm going to say 99% it's going to work. If this is a smart TV, you may not be able to access the apps in the smart tv section.
I've got the TV (Toshiba 32 inch, 7 years old) to turn off/on, but can't access the tuning menu (searches for channels). I've tried pressing an array of buttons and nothing happens. (Using Philips universal remote SRP2014H/27)
Did you try all the codes?
Would this work on a Westinghouse tv??
It "Should". I usually leave a link in the description to the codes. You can check to see if that brand is listed..
Life saver
You're welcome!
This phillips remote is the elite version. -it says led back lit buttons but i dont see it lighting up -is there a sensor or trick to do it ? Thanks🔅
I'm not sure which actual remote you have, but I doubt it has a sensor. Those are usually in the more expensive remotes. If there's no dedicated button to light the keys or the keys don't light up for a few seconds when you push them, I'm not sure then... what's the model number of the one you're working with?
@@JLPicard440 yeah I'll get the model for you it looks like the keys are white like maybe they're those kind of glow-in-the-dark keys but on the box it says backlit LED on the packaging it came in- so I'm wondering after using it a certain amount of time they will turn on otherwise there is a customer service number I'll call but I'll get you back the model number as soon as I I am over there
@@solr6894 Yea if it says backlit they should light up. Sometimes there's a button that says light, sometimes the keys light up when you push one and stay lit until you're done pushing keys..
@@JLPicard440 okay tks
The remote is not utilizing all of the remote controls features. Menue is a disaster can you help me to get the right code to make it all work?
HI... you just need to try all the codes for your brand. If the first one isn't working good then try the 2nd one and so forth...
I have a RCA tv and I tried to do what you did in this video but it didn’t work. Any help?
It should definitely work with an RCA TV, but I don't have enough info here to offer a suggestion..
This universal controller won’t allow me to access the settings on my vizio tv so that I can change the PICTURE BRIGHTNESS. Any ideas?
Menu doesn't work? You could try the rest of the codes in your list if there are any, or try the auto code search to see if it'll hit on a better code than the one your on now..
i have the roku streaming stick and the phillips 3 device remote. it worked for my tv but will not work for my roku stick. i tried pointing it directly at the thing, did codes and automatic. can you do a video on that one? or just help me figue out whats wrong. thanks!
HI, the Roku Stick uses an RF signal to control it and won't respond to the IR signal that this remote uses. I have heard that more expensive Logitech remotes that use a hub can use your local network in your house to control the Roku. Since Logitech has announced their putting a stop to making remotes, I'm not sure if you can still get one. Unfortunately there are not many options for the Roku stick other than the original remote. Some of the tabletop models like a Roku 3 will accept the IR signal and should work just fine.
@@JLPicard440 thats so meesed up as it's marketed as being able to work with the roku stick! thanks for letting me know
@@elida2433 It probably just says Roku.. does it actually say Roku stick?
@@JLPicard440 I thought it did, on closer look it actually says it's not. That's sneaky
@@elida2433 Arrgh... sorry about that. Can you take the remote back?
Thanks so much! I’m so not technically inclined.
You're welcome.. Glad to help.. 😊
can you show me or tell me how to program this remote to a sony blu ray BDP - S5200.. i cant seem to get it to work... thanks
HI. I don't have that model DVD player available to me here. There are some things you can try. Make sure the batteries are fresh. If you've tried all the codes listed for Sony under your device category, you can try the auto code search to see if it will hit on something that'll work better. Other than that, I'd have to have it here in person to try for myself.
@@JLPicard440 thanks I got it to work with the code search after 10 mins
@@DgenerationX206 Excellent! Glad you got it going.. 😊😊
So if I need my direct TV to work by this remote , then what will I push
U should be able to watch the video and use directv as the sat device under that button. It'd be to much to type here to give instruction.
I have a problem, he configured the control and everything was fine during the day, and the next day I have to put the code back in, how can I make it permanent?
It should do that automatically. Are the batteries marginal? As far as I know there's no way to put the codes in on a temporary basis.
How do u set up for a blue ray player
HI, it would be the same way as the TV, only substitute the DVD button and the appropriate code for your brand of DVD player..
Is there a way to connect to a laserdisc?
Do u mean a CD player? No DVD... I don't know if there's any codes listed for that. You could try some of the codes for the DVD counterpart of that brand you're working with..
Need help need help with bolva curve tv I did the program auto codes tv cuts of I press power to lock code in but it’s doesn’t work
It should work! How are the batteries? Did you first try the codes for that brand (if it's listed)?
@@JLPicard440 batteries were good
I figured out after going through other peoples comments
Problem was after the auto search for codes by pressing the power button tv cuts off than pressing volume up until tv turns back on there was a small delay on me pressing the button until tv turned back on so every time (maybe 15 times trying it again from the start) than pressing tv button to lock in code it wasn’t working almost broke the remote after the 10th time very annoying thanks for the response back
Yea that can be frustrating!... Did you get it working?
@@JLPicard440 yes I did
Does it work with VCR?
There isn't a button for VCR, but there is a AUX button. You'd have to look at the manual and see if there are codes listed there for VCR, if not, then it's not going to work..
I can’t use the pause on my blu ray player I can only play it.. any ideas how to fix it
Hmmm.. did you try all the available codes? If so, how about the auto code search?
What is the codes for a TCL roku tv?
HI, I usually will leave a link to the codes in the description. IF it's not there or doesn't work anymore, you can easily google the codes for this Phillips remote.
Does it connect to a dynex device ?
Probably, did you check the code list to see if that brand shows up?
I can only have my Samson smart tv to turn on I can’t get it to go to Netflix or Hulu but got it to link to my sound bar 🤬🤦♂️
I'm not sure if there's a button just for that. You might have to try some different codes and see if any of the buttons have that function
Will this work on Phillips tv??
It should..
I have an onn tv and I can’t seem to fugure out how to connect the Philip universal remote to it can someone comment down the code that could work please
HI, a lot of the time I'll put a link to the codes in the description. IF it's not there or it doesn't work, it's easy to google the codes for Phillips 8 device remote.
Mine runs on triple a's should I be worried or is it ok
I'm not sure what do you mean? If that's what the manufacturer calls for, then it's not a worry.
I got the remote to connect to my tv but I accidentally changed the input and now it’s not letting me change the input. Like once I press “ OK” to change it it doesn’t do anything
Sometimes a code won't function all the way. It could be that you need to try another code.
I have a Sanyo DP32642 ,what's the Philips universal remote code ?
HI, I usually leave a link to the codes in the description. If not, it's easy to google codes for Philips remote.
@@JLPicard440 THanks for your help , I've found it
@@karonbarwick541 Excellent!
What do you do if the romye stips working
Try the batteries first.😊😊
I did put in brand new batteries but i even tried set up again still wont work
Can this remote work with Samsung smart tv ?
It'll probably work, but it more than likely won't work the smart functions of the TV, just the basics ..
How to program a cable box
It's the same procedure as shown.. just selecting cable/satellite under the device buttons instead. And using the appropriate code..
Yo will this work for a JVC tv?
It should.. If you don't own the remote already, you can google the codes for this and see if JVC is listed... If it's a JVC smart TV, you could run into compatibility issues with the smart features.
I have sony ct60 soundbar is this compatible with my soundbar? Thanks
More than likely, but I have no way to see if a specific model number is compatible..
Take a Bath Productions ¿cuál es el código de este control
🙏🙏🙏
You're welcome..
Does this remote work on a lg tv
It should. If it's a smart TV, it may not work al the functions.
I need one for a phillips radio stereo two cassets 3 cd is one around
Does that have remote capability?
Yes i have one but dont work any more
@@JLPicard440 yes
@@jesusroque256 OIC, is there a code listed for Phillips under audio? If you don't have the code list, there's a link to it in the description
How do i change the batteries
Hi, usually the batteries are under the back cover. The cover just slides off.