Edelbrock rpm air gap vs Ebay air gap comparison Part 3. Edelbrock gets Stage 2 ported😁
Vložit
- čas přidán 8. 07. 2024
- Here's the 3rd and final al part of the comparison. The Edelbrock gets Stage 2 ported and let's see the results!!
thanks for watching and please hit the like button, subscribe and check out our Facebook business page at Bigdogs Porting.
I can't wait to see my results. Tony is porting my trick flow heads and Holley system max intake. I figured it would be best to do the heads and intake at the same time. Next is some 3800 heads I need done. I'm very excited to get all my stuff done
Thank you for your hard work and bringing info
Great job! Just wondering?... The Edelbrock has a cut out section under where the carb mounts and the chinese one don't. Does this have anything to do with flow?? Thanks for the videos!!
It's all about the combo when we port. That's the extra bonus you get with our porting. We don't do a one size fit all with our porting. We tailor our porting techniques to the customers combo.
The notch in the divider helps on the high rpm flow especially when using a carb on the smaller side for the combo but it also softens the low rpm signal a little as well. When the carb is sized correctly for the combo or the combo is not revving that high like in a 4x4 application then we keep the dividers intact for the extra off idle boosted signal to the carb.
This is why we tell the customers to follow our recommendations and leave it up to us.👍
@@bigdogsportingtonyb2833 Cool!! Thanks man!
Man if I knew this I would’ve never bought the weiand stealth 8023, I’d love to see a weiand/edelbrock comparison
Make sure you like, subscribe and follow us on our Facebook business page and CZcams channel at Bigdogs Porting. Share as well. That's how people can see this type of content and learn
Yea, your Facebook is how I found your CZcams, I’m waiting to see if that 302 build makes it to my 380 hp prediction 😂
On a stock stroke Ford 5.0, we compared a regular RPM and the Stealth. The RPM worked well, but the Weiand beat it everywhere. The RPM ran as if it was "too big" for the engine, compared to the Stealth. The RPM might be be better on a stroked 5.0, but on the stock stroke 5.0 Ford, this is one time that the Stealth wins.
Good stuff, you got any info, or have an ported holley system max lower for 8.2?
When porting 2 peice manifolds we never just port the lowers only. This is NOT the correct way of doing this. You ALWAYS should port the lowers and uppers together then make sure they are flowed bolted together like we do them. Our porting is much different than others and this is why our glow rates and hp gains are much higher. We only sell complete sets of ported manifolds
Ever flowed a standard Edelbrock performer intake or performer RPM for a carb? any idea what they flow
Yes, we did videos and posts on them. Search our Facebook business page and CZcams channel at Bigdogs Porting