How To Replace Spark Plugs Like A Professional
Vložit
- čas přidán 29. 02. 2024
- We get it. It’s just spark plugs. What could be so difficult. Well, come along with us as we show you step by step how we do it. Maybe you’ll learn something you can add to your arsenal for the next time you do them. We also understand that everyone has different ways of doing it. This is what has worked for us for the past 20 years. We don’t have comebacks. That’s the most important thing. We hope it helps. Enjoy!
Spark Plug Cleaner: amzn.to/4bB2GNa
Spark Plug Gap Tool: amzn.to/4axd9rv
Dielectric Grease: amzn.to/3UVObfF
Copper Anti-Sieze: amzn.to/3UVObfF
Spark Plug Starter Socket Set: amzn.to/4dUksfY
Our Affiliate Store:
Autel MS909 Scanner: amzn.to/4bVbXQ2
Top Don Battery Maintainer & Jump Starter: amzn.to/4bW0dwB
Topdon Phoenix Lite 2 Scanner: amzn.to/3wJMEBz
Brake Fluid & Coolant Test Strips: amzn.to/4ayOQJS
5 Piece Protective Lug Nut Socket Set: amzn.to/453c4GW
Fluke Multimeter: amzn.to/3UX86La
We are partnered with AESWave. We've dealt with them for years and they are great people so please show your support to them! Our store link is:
www.aeswave.com/RoyaltyAuto
Yes we make commission on these products if you buy from these links. This supports the channel. We will never recommend a product that we don't truly believe in. This is just the beginning of our products. We will add more as we go.
Great video guys. I worked for LAPD for 21 years and i torqued all suspension bolts, nuts, spark plugs and of course all brake caliper bolts and even bleeder screws. You'd be surprised how many people didn't even torque the lug nuts or the intake manifold bolts. I have all the torque wrenches, quarter drive, 3/8 drive and half inch. Plus i marked every bolts to make sure that i torqued them. Thanks for reminding all technicians to be professional at their job.
Can u get me a job there? lol
@@midnightroush97 you can apply lol. I’m retired already👍
Great work! Glad to see and hear mechanical taking specs seriously.
@vickenkaragozian2041 where can one apply? I've been looking online, but no luck
Every time I get brake pads replaced. I have to get new rotors, (because nobody uses a torque wrench on lug nuts).
I have been changing sparkplugs for over 40 years and have never used anti-seize on the threads. I was told years ago that the addition of anti-seize to the threads will mess with the torque specs if you use a torque wrench to torque them down. I have read that some manufacturers do not recommend using it, but I can't remember which ones off the top of my head. I have always used dielectric grease in the boots though. Great video as usual.
I agree, but a drop of light silicone spray lube doesn't hurt. With dry threads, the specified torque doesn't always even crush the seal.
I've heard that same thing when I was at the factories main engine training center.
Cast iron heads and aluminum heads are vastly different. Always use anti-seize on aluminum heads.
@@abovetherimrob891 I have owned a car with aluminum heads since 2006 and have never used anti-seize on the plugs and never had issues removing them when replacing plugs.
Always use antiseaze unless the mfg says not too. It helps heat transfer and will extend the life of the plug aswell as helps ensure proper torque.
The electrical connectors unlock more easily if you push the connector in further to relieve pressure on the lock tab before attempting to release it.
I recommend blowing the area around the plug out with compressed air after loosening the plug a couple of turns to prevent any debris from falling into the cylinder.
I used to use anti-seize on aluminum heads when they first became more common ~40 years ago and it was common for plugs to seize in the heads. Probably different aluminum alloys and/or coatings on plugs seem to have solved the seizing problem a long time ago. I can't remember the last time I wasn't able to remove a plug without some sort of damage.
A few additional things to consider , #1 Make sure the springs are still inside the boots when your putting the coils back on , sometimes they fall out without you even realizing it. #2 Look inside and clean out the wells before removing the plugs. Many times the wells are filled with oil / debris. #3 inspect the boots for any signs of arcing. Even a pinhole is going to be a problem.
Why not replace the rubber boots so you don't have an issue before the spark plugs require changing again. With some V6s the intake manifold has to be removed to change the spark plugs. It would suck to have to do that work again.
I would have never pulled those plugs out without blowing out the well, cracking the plug lose and then blowing the well out a second time.
I always spray brake clean followed by air after removing boots. Then remove the spark plugs. Thanks for the videos as I do not work on vehicles for a living. I just thirst for knowledge. Love the diag videos as well. ❤
literally wouldnt change a thing. great vid guys
Great advice! In addition to your process, I will take a shop vac or compressed air and clean out any debris in the plug recess prior to removing the spark plug. Yes, it's overkill, but you may be surprised what can get in that recess.
Great video. Thanks. I’ve seen the debate over use of anti-seize. I’m a DIY person who uses it with no issues. I’m sure they’ll be comments about what can go wrong but those people never seem to show any videos about the “wrongs” happening but just prefer to comment and troll on other people’s videos.
1:15. Guy just wants to replace them and get paid…..
1:57 Guy jams whatever is available in
12:46 the can't be good....
15:10 NGK SAYS NO ANTI SIEZE FOR THEIR PLUGS DIRECTLY ON THEIR WEBSITE
5 THINGS YOU SHOULD KNOW ABOUT SPARK PLUGS
1. Anti-seize
NGK spark plugs feature trivalent plating. This silver or chrome-colored finish on the threads is designed to provide corrosion resistance against moisture and chemicals. The coating also acts as a release agent during spark plug removal. NGK spark plugs are installed at the factory dry, without lubrication or anti-seize.
Anti-seize can act as a lubricant, altering torque values up to 20 percent, increasing the risk of spark plug thread breakage and/or metal shell stretch. Thread breakage can sometimes involve removing the cylinder head for repair. Metal shell stretch changes the heat rating of the spark plug and can result in serious engine damage caused by pre-ignition. Do not use anti-seize or lubricant on NGK spark plugs. It is completely unnecessary and can be detrimental.
But these aren't ngk
@@483SGT they said they use ngk and they said always use anti seize and surely all premium plugs work the same way. this is old school tech stuff that never kept up with the times.
Just like he taps the plug to gap it
The brand doesn't matter. What's important is whether they are plated. Some brands are nickel plated. It they are plated, you don't use any anti-seize. If they are bare steel or black oxide, then you use anti-seize.@@483SGT
Don’t drink milk because it’ll make you fart
Might be an edge case, but I drive a Honda Fit that uses NGK plugs and they recommend using anti seize on the threads in their service manual. The manual did update to call for 20ftlb instead of 13ftlb on the plugs though so I would wonder if calling for anti seize was the reason for them to increase the torque spec.
As you can see, the lowly spark can generate alot of conversational opinion. We are all still apprentices after 45 years. Keep producing the videos. 👍
If you want an active comment section, just make a spark plug video and take a side on the antiseize vs. no antiseize question. Guaranteed flack in coming. It doesn't matter what side you take. Just take one.
I'm really glad you talked about some (Ford) spark plugs that should be remove on a hot engine. Of course on a Ford truck, it will be the one in the back. That is the hardest to get to, that will break.
I perform a BG induction service then remove with 3/8 impact gun hot..
I think the reason the rear plugs are difficult to remove is that they're often skipped because of limited access.
Perhaps it would be a good idea to wipe the porcelain portion of the spark plug with isopropyl to clean off the oils from your fingertips. Some manufacturers of spark ignited engines do recommend doing it. Great Video. 👍
Great Comment!
I just avoid touching the porcelain.
@fascistpedant758 How can you possibly know that you or others haven't touched the plugs along the way? The factory doesn't give the option of " if you or others haven't touched the porcelain, then you can skip ....". You need to wipe it down if you're going "to replace plugs the professional way." It is professional to wipe the plug as any beads of finger oil can cause flash over. I can send you pictures of what we have experienced in the lab.
This would be a great video in an apprentice guide play list for young people just getting started. It's been my experience that a lot of older techs will tell an up and comer to do somethingbut they skimp out on the why it it needs to be done a certain way. Great videos
I've been in the grind professionally about 40 years.
Love your videos.
The most impressive thing about this video is the fender covers.
...and that dog. :)
All I have to say down here is that yeah, plugs seem like one of the easiest jobs, and in many cases they are, but they're spooky, and mission-critical. I know a lot of the trucks have absolute nightmare plugs, many of the cars do, and even on "easy" inline 4 cylinders it's always a relief when they come out clean and don't bring the threads with them, and another relief when they snug down firm and don't keep spinning with the wrench.
Never heard a better description of spark plug jobs.
You do a great job nice work.
Getting a gap tool after watching this. Great video and yes in the Prius once you get the wiper items out of the way, very easy.
Love your attention to detail and vast knowledge from experience. Happy to become a subscriber.
Thank you for showing us the gap check out of the box. Never thought about that. Great video 😁👍🏼
I really enjoy your very deliberate method of working.
Excellent.
Wow! The measuring. Never would have thought that pre gapped plugs could be wrong. Makes me want to check mine!
The gapping method you showed worked perfectly for me. Thanks for the video!
A sprits of interior detailing spray on those connector clips helps a lot, lubricates them so they slide apart.
OMG, a stumpy tailed cattle dog! Win! I have one as well.
Exactly the video I needed to tackle a DIY spark plug replacement job on an LS4 engine. Very timely and well done! Thank you for your time and professionalism!
I love your philosophy/work ethics on cars. Great video! 👍
Excellent video smart wise and informative. Anti-seize copper got to keep that in mind.
Thank you
For the video
Good to know
Put a light film of copper anti seize on your wiper blades. It makes the wipers last twice as long and keeps the window clean as can be. :)
Good one 🤔
Amazing informative video!!!! Thank you for all the details!!
So glad I found this channel. Been following your guide to do my brake pads on my Nissan Silvia 😅
Great video. I believe the general guidance with regard to anti-seize that the torque needs to be reduced by 20% from the spec torque. The reason for this is your introducing a hydraulic compound on the threads and the plug shouldn’t be torque to full value because in fact with the compound you’d be overtorquing them as well. As well, there is some debate about reducing torque when using anti-seize, but the general consensus said it should be reduced. That said I appreciate your video and your expertise and how you do this.
Let me tell you sir, the best brand spark plug i have used is the brand Beru. This brand is known to have a very reliable spark for a long time!
Second brand for me is the Ngk. Outside of these 2 brands, I've noticed power loss to my experiences.
but I have also noticed that some cars only run well on the Oem spark plugs, and other than that sluggish.
I always use spark plugs from the dealer original only. Some want a different better long lasting brand but there is a downside to using these other brands that last longer. The longer your spark plugs stay in your engine the more likely they are to seize with the heat and corrosion over time.
Awesome video you guys, I really enjoy watching your stuff, I look forward to seeing more scope videos. We do the same procedure at our shop with the exception of we replace the coil boots at the same time as the tune-up/spark plug replacement, pretty frequently we see corrosion build up at the coil contact points under the boots
Really enjoyed it ! Thanks for producing another training video ! 👊🏼 🔥
Very informative. Thanks again..
Great video and always a learning curve
Great informational video
You guys give such great instructions!! VERY helpful to us home mechanics trying to help friends as well as our own family save a bit of money at the shop.
Please do a 5th gen Explorer (like 2013) with all wheel drive. When I had the dealer change my plugs they said "Well it's a transverse mounted engine so we have to take a LOT of stuff apart in order to reach the back 3 cylinders" and they charged me A LOT of money to do that. I paid up cuz I didn't have the tools nor the time to do it. BUT that's since changed and I would LOVE to do this myself some day. I would also love to see how y'all do it.
Thanks for all you do to empower us DIYers!! Really appreciate your channel.
So glad you picked the "easy side". 🤣
Great stuff gentlemen.
It's called reading your spark plugs to understand how ur engine is running, nice job Sherwood.
or just be a real mechanic and use fuel trims...
@@Unit_450Real mechanics can't work on older stuff then. They have to farm the work out to realer real mechanics who really know their stuff.
@@VashthStampeede this is a modern car, I have worked on multiple carb engines and then it is acceptable, but not on modern cars. Fuel trim and trim cell will tell you WAY more than the plugs. You cant dial in an engine with just looking at plugs, you CAN with trims
@Unit_450 One leaking fuel injector can have you chasing your tail trying to figure out the fuel trims. But an inspection of the spark plugs will give you an immediate clue. Also, spark plug condition will tell you about your valve guides, piston rings and spark timing.
@@VashthStampeede I can identify what bank the misfire is on, and even what cyl the misfire is on before you can pull out all the plugs on both banks or even one bank.
Its a good indicator but trims are a faster indicator of engine health, sure if im doing a tune up might as well take a sec to look them over but generally if a car just pulls in with a mis i am going to the scanner, not pulling all the plugs. Some of the plugs on these high end cars I work on are indexed, and almost all of them require replacing if removed. Its better to start with obd data
You guys are amazing!!!
Great video Sherwood. I like your meticulous work ethics.
i gotta admit im surprised by this video from you guys. longtime subscriber to your channel and a ASE Master with L1, L3 and L4 here myself.
1st never use a gap gauge on most modern spark plugs. Feeler gauges or those set wire gauge. 2nd a big no no is to add anti seize to the threads. Most every spark plug manufacturer will tell you that.
a neat trick to start the spark plus is to use a piece of rubber fuel line to start them. I have the plug starters made by a few people but also have rubber fuel line in different lengths 6in, 12in and 18in in my plug tool drawer
The rubber hose trick is a good one for sure! I'll do some research on the anti-seize. I know the use off aluminum anti-seize is a big no but I haven't seen anything on the copper. I'll definitely post an update.
Excellent video here on the anti seize on plug threads question: czcams.com/video/fpixgNQHvVM/video.htmlsi=79KyUOsOho8Yyx04
Can you elaborate on not using a gap gauge? Will be doing my plugs soon so interested in knowing why.
@@MrNewff cause a gap gauge can damage the electrodes on new style plus with precious metal ends. Uss a wire gauge or feeler gauges
Thanks for your video. I've never used ant seize on spark plugs, but I see it because of the complexity of these new cars . Great advice about not using gun on them, coil bolts people have gone crazy using gun on everything on these cars .That makes sense about calibrating your elbows once in a while using torque wrench .
The brownish residues on the outside of the ceramic mentioned around 19.45 actually are corona stains.
He’s correct about the residue being carbon pushing past the ceramic to thread seal
"Royalty auto service"!
For the descendants of George Washington amusing name.
Very interesting and helpful vid, and as a DIY driveway monkey very impressed with the spread of tools and equipment.
FYI my son's Jaguar and wife's BMW, the spark plugs were £25 each from the main stealer .(each having the car makers name on)
A little after the event, research, revealed both used a specific NGK spark plug, at nearly half the price.
Do manufacturers make the gap small so that as the plug ages the gap increases into the oem spec? I replaced plugs on a VW last year, and the OEM recommended new plugs had gaps that were all 0.2 mm too small out the box. I double checked it with two plug checkers, being sure not to damage the platinum coating. I used the exact brand specified by the dealer repair manual. After a little head scratching I decided to grab the neutral pole in a vice (on the sides so the platinum coating was not affected) and gently increase the gap, but I wondered if I might have been better to simply install them with a small gap....
I bought a kit from Mac for spark plugs and I love the thing I still use it to the day that rubber boot is still inside of them they grip good. I love them not sure if you’ve tried those.
I feel so stupid for dropping spark plugs down the hole now. Never thought about that. Thank you for these videos.
Great video.
I never use a socket to start the threads. It is too easy to crossthread them. I always use a small piece of rubber tubing on the porcelain end to feed it into the hole and now you will not have enough torque to damage the threads if it isn't perpendicular to the hole because it will spin around the end before getting stuck. I turn the plug left to loosen it until I feel/hear it drop and change direction because I know the threads are lined up. You can't feel that through a socket either.
Many cars such as Mercedes and Infiniti require properly torqued plugs because they are indexed, meaning the spark has to be at the correct angle and direction to ensure proper combustion.
The original spark plugs in the truck were NGK IR. They are Iridium spark plugs designed to last 100k miles. That is why they looked in great shape after 30k miles 🙂 . If they were platinum plugs, I would change them at 30k with IR plugs.
Thanks a lot for the video..
Antiseize reduces the torque specification per NGK.
Some plug manufacturers recommend only a wire gapping tool for precious metal plugs.
Question regarding anti seize: why copper as opposed to aluminum? Especially with the aluminum heads….dissimilar metals isn’t an issue??
NGK for the win. Use them on everything.
Yes, NGK were the only plugs I ever found that stood up to Nitrous Oxide.
We use only NGK in all our race engines.
I use Vacuum Hose or Vacuum Hose and a Screwdriver to pull and start the Plugs. Flexible and Aimable. Not Everyone has Spark Plug Sockets that retain. It's faster and easier. Cool Vid. I'm much in agreement.
I have been using aluminum Anti seize for spark plugs. I am curious why it is a good practice to use copper. Does using aluminum grease react with the metals? Look forward to your response.
Hi Folks, any chance you have a part no for your gap gauge? Really like the looks of it compared to the other styles but struggling to find the same style over here in the UK. Keep up the good work! I’ve been sending most of your content out to my technicians because it’s so clear, educational and just the right way to do things.
I found that style on Amazon. I ended up getting the round version, but they were available in higher quality than the generic ones under the brand name Lisle and some others that I don't recall now. The difference in price was only a couple bucks.
Glad to see you using a dab of antiseize, a touch of silicone, and hand starting as well. On top of that, I always clean and blow out the spark plug well before removing the old plug. Always have the new plug ready BEFORE hand so the time for the exposed hole is minimal. Also, I use a thread ROLLER (TIME-SERT; 👍 this is NOT a thread chaser) and finally install the new plug
That's good stuff right there. This video could have been an hour long.
You have a link or a part number for that gapping tool I love it
If that ram is a 13 or newer it’s 100k interval or 10 years. Older ones are 30k Good vid guys keep it up.
NGK specifically says do not use anti-seize.
All plug manufacturers say no anti-seize. There is a nickel coating from the manufacture for said reason
Does a little anti seize go on wheel nuts?
I have a 2016 5.7 how many miles does the truck need to have to change the spark out
The torque (23Nm) for Mercedes plugs Direct Injection (GDI) engines is to correctly clock or align the OPEN side of the ground strap toward the fuel injector (+/-45°). Not sure that 's the case for all GDI engines. Maybe make a follow-up video about that.
Correct me if I'm wrong, but the threads are coated on todays spark plugs and is not recommended to use anti seize on them. NGK spark plugs feature a trivalent plating and states not to use anti seize because it can be detrimental.
Why not the aluminum anti-seize ( grey ) on spark plug threads?
I wish I could learn how to be this type of tech
Shouldn't you reduce torque when applying anti-seize to the threads?
Push pull connector Sherwood
I watch these guys not because idk how to do it but more as to why I am doing it.
What is your thinking on not using aluminum anti-seize on spark plugs? What is different from the copper stuff? FYI, I like to think I follow the five or so best mechanics on CZcams, and most of you agree about using anti-seize on plugs, but at least one of the others uses aluminum. I'd really appreciate your insights (and that of any others who may read this). Thanks!
Aluminum head = aluminum / nickle antiseize?
@@juicebox22a Are you saying that the anti-seize needs to be of a different metal than the plug and the head?
@TStheDeplorable The opposite. Use aluminum antiseize for aluminum. I would not use copper antiseize with aluminum as I would think they are dissimilar and could react.
Locktite makes a non-metallic antiseize paste that Bosch specifies to use on spark plugs used in industrial machine applications.
@@juicebox22a I wondered about the dissimilar metals and the possibility of an electrolytic (?) reaction. Thanks for letting me know about the Locktite paste!
Do not use anti-seize with modern engines or spark plugs. No manufacture uses anti-seize and most modern spark plug manufactures say it will ruin the special coating.
Oh, I see you've touched on a very controversial topic for professionally installing spark plugs. That being the use of anti-seize. I was under the impression , and will continue to abide by, that it shouldn't be used on today's nickel coated plugs. NGK specifically states that anti-seize or lubricant on NGK spark plugs is unnecessary and can be detrimental. Autolite would indicate that anti-sieze can alter the tightening torque up to 20%, increasing the rise of breakage.
Some habits are hard to break.
About to watch the video these guys are great but no anti seize just hand tight with a ratchet and of course the material and gap has to be correct. With die electric grease on bottom of coil and connector that's it that's all.
One should also take into account the fact that Auto Manufactures stretch the truth about how long a Spark Plug will Really Last to keep the Maintenace Cost Figure low, just like they do when saying an Oil Change only needs to be done every 10,000 Miles. Of course they say under Ideal Driving Conditions to cover Their Lower Back Side. I'll give an Example. An Auto Manufacture says the engine comes equipped with Iridium Spark Plugs and therefore they only need to be replaced every One Hundred Thousand Miles. I don't care if the Spark Plug look like new when you take one out. The resistance to fire that plug can be much more than it was when the Spark Plug was new. That makes the Ignition Coils have to work that much harder to fire them. Replacing the Spark Plugs Twenty Five Thousand Miles sooner perhaps would make more sense because by doing so you might prevent the Ignition Coils from failing. On certain Vehicles an Ignition Coil could over heat and perhaps even melt and could also cause the failure of the ECM. At One Hundred Thousand Miles the Vehicles Warranty has long since Expired and the Vehicle Owner is now responsible to pay the Bill. If you do find a faulty Coil and just replace one Coil and then 3 Months later the car comes back because another coil has failed the Customer might ask why the Heck didn't you tell me about that Coil being on it's way out at the time? I say replace all the Coils when one goes bad, just like you would if one Headlight burns out. If it's for your own car OK fine, but for Customers Car?! All Denso Oxygen Sensors come with Copper Never Seize. It makes great sense to use it on Spark Plugs for the reason you stated on Spark Plugs also. Once Again, Another Great Video!!!
The car care nut says if you torque your spark plugs to spec you don’t have to use anti-seize and I never had an issue on my Toyota..
Why only use copper anti-seize and not aluminum on spark plug threads?
I really like how you explain even the simple things! 👌
15:46 Don’t some spark plugs come pre-greased or coated from the factory?
Doesn’t putting anti-cease on the plugs change the torque setting?
(I’m just curious. Greetings from The Netherlands 🇳🇱)
In May 2024 I will have 40 years as a certified mechanic,33 years as a Master. I also have master tech with Toyota,Nissan,Chrysler/Dodge and BMW.
But who cares about that.
I do know that during Chrysler factory training in Ontario California we would joke that someone from Champion plug’s took someone from Chrysler to some nice dinners and probably (other places) My point is that as a Master mechanic I wouldn’t even put a “ Champion “ plug in my lawnmower , that was the general consensus among us factory mechanics.
Yep absolutely agree
Champion back in the day were horrible but, like many things, times change. We haven't had any problems with them in years. But you were definitely right about the way I used to feel about them.
Here comes the anti-seize on spark plugs debate.....
NGK specifically says do not use anti-seize. I’m sure NGK knows more about spark plugs than I do.
@@user-vx7vi3vq1c They do! And Honda say to use NGK spark plugs *with* antiseize. I'm absolutely sure that Honda knows more about engines then I do. And that leaves us with a conundrum.
@@jptrainormaybe, I will put anti-seize on every other plug.
@@newportpa67 That would, at least, be an interesting experiment.
NGK states that using anti seize can affect the torque spec on the plugs, but I have always used a little regardless.
Good video, but I don’t agree on the use of copper grease.
Zinc & nickel plated spark plugs you really shouldn’t put copper grease on.
The copper can cause galvanic corrosion with aluminium heads. This is a minor issue.
Major issue is torque. You can offset the torque up to 20% (usually too tight)
Also most big manufacturers (NGK - Champion - Denso etcetera) recommend not using any type of anti-seize other than the galvanic coating which they come with from factory.
You can use anti-seize on black metal spark plugs, I can’t remember what metal alloy that is. I personally never saw this type installed in a modern car.
Here are the methods that applies to most cars and light trucks made in the last 15 years. Always use OEM spark plugs in modern engines. Do not use anti-seize in modern engines. No manufacture uses anti-seize and most plug manufactures have coatings that can be ruined by anti-seize. Also can affect torque values. If you have to gap a modern spark plug it may be the wrong spark plug. Double check the number and always compare to the old spark plug. Do not gap exotic tipped (iridium, etc.) spark plugs or you can damage the spark plug. Only use dielectric grease when a manufacture used it and very little. Dielectric can attract contaminates and not allow a rubber boot to seal properly on the spark plug. Always clean around the area and in a recessed spark plug hole BEFORE removing the spark plug to prevent debris going into the cylinder. Always follow manufacture service information.
SHERWOOD him just lil guy, I know the feeling brother, have guy that helps me like 8ft tall never needs step.
Why not the sliver anti-seize??
oops i had previously used the aluminum antiseize.
I always use original spark plugs from the dealer. I don’t like using other brands that are better and longer lasting. Because the longer a spark plug sits in your engine the more likely it will seize and get stuck from corrosion. Besides it’s better to change them more often as to inspect the condition of how your engine is running. Lazy way is buy long lasting. & cross your fingers they will come out with no problems
Antisieze applied affects the torque
I wish you’d mentioned why you don’t use aluminum anti-seize.
Not going to say I disagree with any of your video But most manufactures say do not put any antiseize of any kind on a spark plug install them dry. Well I do what you do I wish I could explain it more but why do you do such. I agree with your whole video Many would say we are wrong. Whats your thoughts?
As stated multiple times anti- seize is not recommended.
The video states this a a 2016 Ram 1500 with a 5.7 l engine.
The plugs being installed are clearly champion 9055 .
If you look up the spec for these plugs they come pre-gapped to 0.054. they make it sound like some how they came gapped incorrectly or have been damaged in shipping.. This clearly not the case.
Champion states when using these plugs in this application they need to be gapped down to 0.044". .
Tech tip here. just because you buy a spark plug for a certain vehicle does not mean they are drop in.. al;ways look up the specifications of the part being installed.
These guys cleanly did not do this
Why do spark plugs have a nickel coating from the manufacture ?
Why only use copper never seize?
In regards to the never using Never Seize debate on Spark Plugs: Some of us are so old that we remember the old Mazda Rotary Engines having 2 Spark Plugs Per Rotar and not being able to get them out or on a VW Air Cooled Engine back in the day. I could be wrong in one way, but correct in the other?
Why do you say never use aluminum anti-seize?
Champions belong in Mopars and lawnmowers, autolite in Fords and AC in GM. That's my story and I'm sticking to it cuz it's always worked. lol
Motorcrap in Fords