Nilight LED Truck Bed Strip Lights for the Ford Maverick 2022
Vložit
- čas přidán 28. 02. 2022
- In this video I demonstrate how to install the Nilight LED Strip Lights for the Ford Maverick 2022 in the truck bed. I got these lights from Amazon which I will put the link in the description below. (not and affiliated link ) so you guys can take a look at it and get more info about them. I found this installation pretty simple and easy to do. I highly recommend this lights since the aluminate the whole truck bed at night and you can see what you are doing. Let me know what you guys think of this video and I hope you find it helpful. As always please support the channel by Liking this content and subscribing to the channel. Thanks for watching..... Links below!!!!!
Link for lights: www.amazon.com/dp/B07KXR799K?...
Click this link to subscribe:
/ @raffired
=============================================================
My Affiliate Links
==============
Want to travel for free like I do.Well with the Capital One Venture X Card you can do that. This is my number one travel card for 2023. Click the link below and you can get a welcome bonus of 75,000 point to travel for free. Apply with link below. Terms Apply.
Link: capital.one/3H9RUAy
Get 60,00K Membership Rewards Point and travel for free on you next trip. Here is a referral link for your new American Express Gold Card. The Best card for Dinning, Groceries, Traveling and much more. Click the link below to apply for it and you could earn a welcome bonus. Terms Apply. americanexpress.com/en-us/ref...
LASFIT - Affiliate Link: lddy.no/13v4w
Epidemic Sound - Referral Link
www.epidemicsound.com/referra...
Movo Photo Mics:
shareasale.com/r.cfm?b=139000...
Movo Mics:
shareasale.com/r.cfm?b=139086...
==============
My current setup!
==============
CAMERAS:
Sony A7C Full Frame
Sony A6600
Sony A6500
DJI OSMO POCKET
DJI OSMO Action
iPhone 12 PRO MAX
LENSES:
Rokinon AF 24mm f/2.8 FE Lens for Sony E:
www.bhphotovideo.com/c/produc...
Sony E PZ 18-105mm F4 G OSS
www.bhphotovideo.com/c/produc...
Sony E 20mm f2.8 AF Pancake: www.bhphotovideo.com/c/produc...
Sony E 55-210mm f/4.5-6.3 OSS: www.amazon.com/gp/product/B07...
AUDIO GEAR:
Movo VXR10 Universal Cardoid Microphone: • Unboxing & Review of t...
RodeLink Wireless Filmmaker Kit: • Unboxing + Review of R...
Zoom H4N Recorder:
www.bhphotovideo.com/c/produc...
Audio Technica ATH-M50x: • Unboxing & Review of t...
Blue Yeti USB Mic: • Unboxing & Review of B...
LIGHTS:
Dracast: • Dracast S - Series B...
DRONE:
Mavic Pro: • Unboxing the Mavic Pro...
TRIPODS & FLUID HEADS:
TRIPOD:
www.amazon.com/gp/product/B01...
MANFROTTO:
www.amazon.com/Manfrotto-MK29...
TRIPOD HEAD:
www.amazon.com/gp/product/B00...
FAVORITE CAMERA BAG:
Vanguard Havana 48: • Vanguard Havana 48 Tec...
FOLLOW ME!
Instagram: / raffi_red
Twitter: / raffi_red
=================================
For any Collaboration or if you want me to send me products to review contact me via email or Instagram. Thanks!!
✉️ Contact Me - raffired25@gmail.com
CZcams: @Raffi Red
Instagram: @Raffi_Red
You can wire the lights through the taillights up top to avoid seeing the wires going into the grommet.
That's how I would have done it. I also would have put the lights up another inch or two up behind the lip of the bedside so you can't see the LED strip.
Either way, still looks nice. 👍🏼
That's the type system I want to do except work a choice of colors. Clean installation.
Good job. Looks good. Thanks for sharing.
Thanks for the comment. I appreciate the feedback.
Very nicely done!!
Great job! I will probably get a different toggle switch (smaller) and mount it on the 12V cover so no wires will show.
Suggest you look into solder and seal connectors. Even better than a butt connector.
Awesome vid. Hey heads up though. Your bed assist shock is upside down. Flip it over and it’ll avoid crap collecting on the seal and ram 🤙🏻
Cute dog!!!
nice video gj :)
Great video. You do such clean, professionally looking upgrades! Do the lights have an automatic shutoff? I worry about leaving it on and draining the battery.
I know this is an old comment, but the prewired cutouts in the bed that he used are running off of a switched fuse. So they'll only work if the truck is running and for a few minutes after it's turned off.
@@jrmaddock1 Ty anyway!
hello how are you..any help with the power cord fuse for those lights,my fuse blew and i dont know where to replace it..thanks in advance
Looks good man! I’m in the market to get a maverick but still debating but definitely 10/10!
Any reason you didn’t install the rear one that goes against the cab? Great video by the way, thank you.
No need to do that when there is a stock cables already back there.
@@RaffiRed lol that makes no sense to the question I asked.
Let me tell you you did a nice 🎉 I’m old to do that.
but where are you
my Maverick is in process to Delivery’s I’m waiting just last November
but I want my maverick ok 😅
El señor de los cielos. Uyyyyyy uyyy - Tu tranquilo y yo nervioso. Lol. Thanks for the comment. I live in Orlando Florida. Hope you get your Maverick sooner. Let me know how it goes when u get it.
How do you know where to cut the 60” LED strip to fit the shorter Maverick bed?
Because you tape the light first and then you cut it when it reaches where ever you wanted to reach.
You can technically cut it wherever you want it. So don’t let it put to much pressure on you when you go to shorten it.
What's the wire sticking through in your bed? I need one
Which wire is the one you are talking about that is sticking out ?
That a golden mountain dog ?
I install mine but i use NO magnetic switch on the side of the door then when i open the door bed the light turn on
What do you mean?
@heroofharo normally open magnetic switch
@@elpupusero so do you just put that on the tailgate, and once you open, the loss of magnetism turns the light on?
@fiestaport I also would like to know how that works too, I may want to change it to that method who knows if it works.
@heroofharo you install the magnetic switch on the side of the bed next to the tail light and install the magnet on the door so when the door open the light turn on and when the door closed the light will go off,,
you did not show where you connected the ford wire to the truck,... so I am left in the dark.
I demonstrated that in the video. I connected it to the stock wires on the rear inside the bead truck. Inside the black cover on the left side. I hope that works. Thanks for watching and for your comment.
Jaclyn’s bf