Nilight 3 Pcs 60in LED Truck Bed Lighting Strip Install and Review

!!! For $50 off your next Move Bumpers order or 10% off at Yeswelder use the link below and my ambassador coupon code at checkout: GMP !!!
YESWELDER - yeswelder.com/...
MOVE BUMPERS - move-bumpers.m... From start to finish install and review for Nilight's 3 Pcs 60in LED Truck Bed Lighting Strip.
Check out this product on Amazon:
amzn.to/3H7fcWl
Nilight Online Store:
www.nilight.co...
Nilight Store on Amazon:
www.amazon.com... !!! For $50 off your next @Movebumpers order, 5% off and free shipping @diodedynamics , 10% off @YesWelder , 15% off @AUXITOLED and 6% off @fitcamx Dash Cameras use my referral links below and my ambassador coupon codes at checkout!!!
DIODE DYNAMICS - Coupon Code: GMP
Link: www.diodedynam...
AUXITO - Coupon Code: GMP
Link: www.auxito.com...
YESWELDER - Coupon Code: GMP
Link: yeswelder.com/...
MOVE BUMPERS - Coupon Code: GMP
Link: move-bumpers.m...
Fitcamx - Coupon Code: Fitcamx821
Link: fitcamx.com/?s...

[@jeffnelson9280]

I'd have just wiredthem directly into my running lights, so when you're lights are on your bed is illuminated - much easier then fishing the wiring all the way up front

[@GreenMountainProjects]

That's good and all until you are running out to get something from your bed and you need light but your truck is not running. Also if your bed is constantly illuminated when you drive at night you are seriously running down the LEDs lifespan. Putting in the little bit of extra effort for a more quality outcome goes a long way.

[@kylerharris938]

Can you come install mine?

[@wgk100]

I know this is old. But when it was originally connected, where did the white wire with tan line go? It was re-routed to the bed lights but what did you do with the other half of the line?

[@GreenMountainProjects]

This continues to your cargo lamp (white light on the third break light that comes on when the doors are open or you hit unlock on the key fob). I spliced the wire in to this cargo lamp wire so it still could feed the cargo lamp and the bed lights at the same time.

[@wgk100]

@@GreenMountainProjects so it is power to the 3rd light that you rerouted to the bed. So you spliced two wires into the one

[@GreenMountainProjects]

@@wgk100 correct!

[@Stuckofftherealness]

Explain the fuse thing you put under the seat. It doesn’t connect to anything it’s just some sort of junction for the power ?

[@GreenMountainProjects]

The fuze acts as a switch. Instead of you physically toggling a button it uses a power source to activate it. Basically its so you are not drawing too much power from what is activating the light.

[@sssweettooth]

Can you share the link to the relay used, and what year is your Ram?

[@GreenMountainProjects]

It’s a 2020. These are the types I use.
6 Pack 4-pin 40/30A 12VDC Relay Kit, SPST Automotive Relay, Interlocking Harness Socket Holder, Heavy Duty 12 AWG Tinned Copper Wires a.co/d/0eyYxZR

[@teabee44]

How are they holding up 2 years later?

[@GreenMountainProjects]

@@teabee44 still working just fine, only had issues with the wire I connected to the frame rotting due to salt exposure. Other than that no complaints!

[@jonathanbuzas6215]

At 11:03 minutes you say “this is” while touching the wire hanging down but then the video skips and starts talking about the wire going to the cargo light. What’s the hanging wire? And how did you find out which cable runs to the cargo light? did you pull another wire all the way up to the cargo light?

[@GreenMountainProjects]

Yes sorry editing mishap. The wire I was holding was the one I spliced into the cargo lamp wire at the door sill location. I then ran that wire to the relay. I found the cargo lamp wire by looking at the wire feeding the cargo lamp at the lamp itself. I then went and found it in the door sill. I did not pull a wire up to the cargo lamp.

[@mikelross3505]

What wire do I tap into ? I love this an want todo it but I can’t find out what what wire please 2016 dodge 1500 eco diesel

[@GreenMountainProjects]

I don't know which wire exactly but if you pull the third break light and see which wire if feeding it, you can then go find it in the wire in the driver door sill and tap into it.

[@mattharrington7364]

when you turn on the bed light does that turn on your regular light and also these?

[@GreenMountainProjects]

These are wired to the cargo lamp. It only turns on with that. I didn't add a second source to just the bed lights.

[@alanwright782]

Is the strip that goes across the back shorter than the sides or are all 3 of them 60”?

[@GreenMountainProjects]

Same length

[@alanwright782]

@@GreenMountainProjects thank you

[@colincorbley3943]

I put these on and ordered the same relay you have and mine won’t come in they just flicker

[@GreenMountainProjects]

Sounds like a bad connection. I would start checking that. Could also be a bad relay.

[@antoineharris9432]

Useless video. Guy is all over the place with wiring instructions which is the most important part.