Thank you for watching. Make sure to check out the description for all the links and info. In your opinion, what is the most important factor in carrying this way? Make it an outstanding day And #NeverFearTheDark
Hey Miles! Just like always, great stuff & excellent job! You covered pretty much everything people need to know about this rig and I especially appreciate how well you explained the functionality and purpose of the roto feature :) Looking forward to more of your awesome videos and to see how well the holster performs after a couple of weeks of use. Thanks again, mate! Regards, Al
Nicely done review. I have a Craft Holsters shoulder holster for my model 85 Beretta BB. It’s a horizontal design, single ( no offset magazine holder ) strap. It’s single stitch leather. The leather is just fair….as is the holster. The transaction was flawlessly done and I was kept in the loop all the way to delivery. I have approximately 8 shoulder holsters and 4 “Alaska” style chest holsters. If I were to rate this holster on a 1 to 100, 100 being best, I would rate it around 70. There are several I would suggest you look at before you make a buying decision. Galco, Bianchi, Gould & Goodrich and DeSantis being a few I would rate a bit higher than Craft. For chest holsters, Diamond D out of Wasilla Alaska is very hard to beat. Again, the Craft is nice, but the leather and single stitching is not on a par with the optional brands I mentioned. ( the thumb break was also a very thick, pointed piece of leather that was less than comfortable…..and shoulder holsters are all about comfort, if nothing else.) Again, nice review, but look around before deciding.
Thanks for your comment and I appreciate your input. I don’t normally wear shoulder holsters, so my experience is basic at best with other manufacturers. Thanks again for the input, I do appreciate it
I have this same holster being ship to me as we speak in the Mohogany color. Does the holster itself snap on and off from shoulder harness. I have a s&w shield as well and was wondering if I could just buy a holster for my Beretta 92fs and switch holster out instead of buying a complete unit? Thanks looks great.
That is a great question. I know some of the other rigs you can do that, but my best answer would be to email them. I’m sure they could work it out, and if not they might be able to sell the whole holster portion from the buckle/ rings down. Either way, let me know what you come up with. Thanks for watching, I really do appreciate it
I really enjoy wearing it. Comfortable and a good quality. The companies good, so if you have any questions or issues make sure you contact customer service. They will definitely help you out
Good question. From my understanding, Craft Holsters has their own craftsman as well as sell other manufacturers like Falco. In my experience with Craft, their personal customer service and warrantees have made them one of my go to’s for leather holsters. If you have any issues, they make it right. Hope this helps. Thanks for the question and I appreciate you checking it out.
So, I have two questions. Firstly, how much is that holster? And second, do they make any left handed or ambi holsters? I'm left handed and am looking for places that sell ambie or left handed holsters. Or as Yankee calls it wrong handed. Also, I'd like to note that I am also a blind (actually partly sighted) gun owner, and believe there needs to be more of us out there.
Welcome, i’m glad you found my channel. Yes, if you check out Craft Holsters website, they have most if not all holsters available in left-hand. If you have any specific questions their customer service is top notch as well. If you’re interested, we have a #ShootingWithDisabilities Chat every Wednesday, 7 PM Eastern. Let me know and I can send you a link if you’d like.
@@PatriotInTheDark, I'd absolutely be interesting in joining the podcast. I'd just have to get my phone or computer set up to work with it. I'm still in the process of getting my channel put together. As far as Craft Holsters go I'll have to check them out. The thing about being wrong handed is that lack of everything for us. Yankee's new gas pedal thingy for his sig would be useless for me cause I shoot left handed, and all slide takedowns are on the left side, so not gonna work for me.
You should know that the holster garment strap that runs horizontally across the upper area at the base of your neck - that area will be rubbed RAW in no short order...!! Bad design...! My opinion.
@@paraord1410 I just seen your other comment and this one is here, I don’t delete any comments. Thanks for your feedback and I do appreciate your comment.
I actually sold the firearm and holster set up a while back. I will check and see if I am able to get it back to do another video. Thanks for checking it out, I do appreciate it.
@@spidennis no, I really liked it. But I ended up giving the holster to my dad. He dresses up way more than I do nowadays. He really enjoys it, so it might be a bit difficult getting it back to do a follow up review. I got rid of the shield to a young lady that was in need.
This will work with both the smith Wesson M & P and the M & P Plus since the slides are the same. Hope that helps, thanks for watching, I do appreciate it
Had mine for a month now. I have nothing but positive things to say about it. the price is right nearly 100$ or more less than Galco & better quality. The metal hardware is nice to have instead of plastic like galco uses. The black paint does fade quickly off the metal but hardly noticeable. Only thing I did that was ignored was slick all the leather edges that were ignored like the strap edges & single layer edges on the holster and mag pouch they did slick all the double stitched areas which looked like shiny glass but with a bic lighter or pen & some bees wax or wax paste & a lot of patience you can make all the edges slick like glass very smooth not a big deal unless you have OCD like me & needs everything perfect or a certain way, lol Good review
Don’t know if your on social security but have you heard of ABLE accounts? They are for people with disabilities, you can put money and sticks into the account. You don’t lose benifits nor pay taxes on sold stocks. They are supposed to help keep the disabled out of poverty
Thank you for watching. Make sure to check out the description for all the links and info.
In your opinion, what is the most important factor in carrying this way?
Make it an outstanding day
And
#NeverFearTheDark
So show us what it looks like when your wearing it !!!!!!
I've never tried a shoulder holster before but if I were to this would be the way I'd go. Great looking holster brother!
Thank you for checking it out, I really do appreciate it
You make a very good video!! Thanks so much! I ord one without the mag holster!
Nice, let me know how it works out.
Thanks for watching, I do appreciate it
Very Nice holster.
Excellent unboxing and review !👍
Thank you pal, I really do appreciate it
May have to look at getting a shoulder rig
Definitely worth checking out. It’s starting to really grow on me now. Thanks for watching pal, I do appreciate it
Hey Miles! Just like always, great stuff & excellent job! You covered pretty much everything people need to know about this rig and I especially appreciate how well you explained the functionality and purpose of the roto feature :) Looking forward to more of your awesome videos and to see how well the holster performs after a couple of weeks of use. Thanks again, mate! Regards, Al
Another beautiful holster! I wasn't sure about black on a shoulder rig, but that looks great!
Thanks for the shout out as well!
No worries, you made a great video.
Thanks for checking this out, I do appreciate it pal
Thumb break or index finger? Can you clarify? Thank you. Great vid.🇺🇸
Nicely done review.
I have a Craft Holsters shoulder holster for my model 85 Beretta BB.
It’s a horizontal design, single ( no offset magazine holder ) strap.
It’s single stitch leather.
The leather is just fair….as is the holster.
The transaction was flawlessly done and I was kept in the loop all the way to delivery.
I have approximately 8 shoulder holsters and 4 “Alaska” style chest holsters.
If I were to rate this holster on a 1 to 100, 100 being best, I would rate it around 70.
There are several I would suggest you look at before you make a buying decision.
Galco, Bianchi, Gould & Goodrich and DeSantis being a few I would rate a bit higher than Craft.
For chest holsters, Diamond D out of Wasilla Alaska is very hard to beat.
Again, the Craft is nice, but the leather and single stitching is not on a par with the optional brands I mentioned. ( the thumb break was also a very thick, pointed piece of leather that was less than comfortable…..and shoulder holsters are all about comfort, if nothing else.)
Again, nice review, but look around before deciding.
Thanks for your comment and I appreciate your input. I don’t normally wear shoulder holsters, so my experience is basic at best with other manufacturers.
Thanks again for the input, I do appreciate it
Your content isn't always my cup of tea but I can't fault the work ethic. I learn something every time.
Well thank you, I appreciate that.
What does it look like when your weary it
Warning! Extensive footage of a man fondling his holster. :)
First of his videos I've seen, the way he is thoroughly feeling everything reminds me of the blind. Impressive.
I have this same holster being ship to me as we speak in the Mohogany color.
Does the holster itself snap on and off from shoulder harness. I have a s&w shield as well and was wondering if I could just buy a holster for my Beretta 92fs and switch holster out instead of buying a complete unit? Thanks looks great.
That is a great question. I know some of the other rigs you can do that, but my best answer would be to email them.
I’m sure they could work it out, and if not they might be able to sell the whole holster portion from the buckle/ rings down.
Either way, let me know what you come up with.
Thanks for watching, I really do appreciate it
Just subscribed nice video hope to see the follow up. Simon.
Welcome. You may want to check out some of my playlists, thanks for watching, I do appreciate it.
I do like this holster, I may get one even though I live in sw florida. Weapons education has one but is very expensive
I really enjoy wearing it. Comfortable and a good quality.
The companies good, so if you have any questions or issues make sure you contact customer service. They will definitely help you out
Thank you
@@floridajim3023 Spend a extra $100 and go to Andrews Leather in northern Florida. One man shop for 37 years top quality
Do you know the difference between craft holsters and falco. Seems like the same holsters but falco is a bit cheaper
Good question. From my understanding, Craft Holsters has their own craftsman as well as sell other manufacturers like Falco. In my experience with Craft, their personal customer service and warrantees have made them one of my go to’s for leather holsters.
If you have any issues, they make it right. Hope this helps.
Thanks for the question and I appreciate you checking it out.
So, I have two questions. Firstly, how much is that holster? And second, do they make any left handed or ambi holsters? I'm left handed and am looking for places that sell ambie or left handed holsters. Or as Yankee calls it wrong handed.
Also, I'd like to note that I am also a blind (actually partly sighted) gun owner, and believe there needs to be more of us out there.
Welcome, i’m glad you found my channel.
Yes, if you check out Craft Holsters website, they have most if not all holsters available in left-hand. If you have any specific questions their customer service is top notch as well.
If you’re interested, we have a #ShootingWithDisabilities Chat every Wednesday, 7 PM Eastern. Let me know and I can send you a link if you’d like.
@@PatriotInTheDark, I'd absolutely be interesting in joining the podcast. I'd just have to get my phone or computer set up to work with it. I'm still in the process of getting my channel put together.
As far as Craft Holsters go I'll have to check them out. The thing about being wrong handed is that lack of everything for us. Yankee's new gas pedal thingy for his sig would be useless for me cause I shoot left handed, and all slide takedowns are on the left side, so not gonna work for me.
The top strap will wear (rub) across your upper neck area & rub it raw..!!
You should know that the holster garment strap that runs horizontally across the upper area at the base of your neck - that area will be rubbed RAW in no short order...!! Bad design...! My opinion.
@@paraord1410 I just seen your other comment and this one is here, I don’t delete any comments.
Thanks for your feedback and I do appreciate your comment.
I’d like to see this in operation!
I actually sold the firearm and holster set up a while back. I will check and see if I am able to get it back to do another video.
Thanks for checking it out, I do appreciate it.
@@PatriotInTheDark so I gather it wasn’t good enough to keep in your rotation huh?
@@spidennis no, I really liked it. But I ended up giving the holster to my dad. He dresses up way more than I do nowadays. He really enjoys it, so it might be a bit difficult getting it back to do a follow up review. I got rid of the shield to a young lady that was in need.
Why not the shield plus?
This will work with both the smith Wesson M & P and the M & P Plus since the slides are the same.
Hope that helps, thanks for watching, I do appreciate it
Had mine for a month now.
I have nothing but positive things to say about it. the price is right nearly 100$ or more less than Galco & better quality.
The metal hardware is nice to have instead of plastic like galco uses. The black paint does fade quickly off the metal but hardly noticeable.
Only thing I did that was ignored was slick all the leather edges that were ignored like the strap edges & single layer edges on the holster and mag pouch they did slick all the double stitched areas which looked like shiny glass but with a bic lighter or pen & some bees wax or wax paste & a lot of patience you can make all the edges slick like glass very smooth not a big deal unless you have OCD like me & needs everything perfect or a certain way, lol
Good review
That is a great suggestion, I’m definitely going to have to try that too. Thanks for watching, I really do appreciate it
Love the holster, but I bought it for a CZ P01 and it turns out that this gun is a real P.O.S. So I'll be ordering another holster soon.
Patriot you left a Green Plastic looking thing in the box under the straw
Yes, it’s a chamber flag.
Thanks for the heads up. I appreciate you watching
@@PatriotInTheDark Didn't want you to loose it
This looks like a great holster but not made in the USA if that makes any difference to anyone!!
Yes, that is correct. It’s made in Europe.
Thanks for checking it out, I do appreciate it
Opens it self to big problems if your unfortunate like I was
Don’t know if your on social security but have you heard of ABLE accounts? They are for people with disabilities, you can put money and sticks into the account. You don’t lose benifits nor pay taxes on sold stocks. They are supposed to help keep the disabled out of poverty