How to Replace Spark Plugs Ford F150 5.4L 2004-2008 | No Broken Plugs!
Vložit
- čas přidán 15. 01. 2018
- Here is a video tutorial on how to replace the spark plugs without breaking any off in the head for a 5.4 V8. This guide will work any Ford with a 5.4L V8. When doing this repair go very slow and take your time I cannot stress this enough. Completing this repair your self will save you hundreds of dollars!
Links:
Spark Plug Socket: amzn.to/2rbSWai
Spark Plugs: amzn.to/2Djoh0r
Dielectric Grease: amzn.to/2DaMxOd
Nickle Anti-Seize: amzn.to/2EOF0Fn
Carburetor Spray: amzn.to/2D7E6Dn
If you have any further interest please visit www.2carpros.com
*Disclaimer: Please use all safety precautions - Auta a dopravní prostředky
In 2016 I took my used Ford F150, 2008 (5.4 V8) that was having this problem: when ever the motor was under some kind of load say, going up a slight incline, going 40-45 mph and running about 1000-1200 rpm the truck would give the herky jerky action - consistently. This was at 136,000 miles so I took the truck to the dealer and they replaced all the plugs and the #5 coil. Now at 212,000 mile the exact same thing is happening, and the dealer wants to either replace the motor or sell me a new truck! After all the research and finding this common problem I think they just don't want to do the job because it is too time consuming and risky, so I am about to tackle this one myself. Thanks for the great video - After reading a lot of the comments it seems like this is the way to go. I've got to admit that I am a little bit nervous about this but I have time so patience will be used - I'll let you know how it turns out - stay tuned.....patience.
UPDATE: I did just as was described in the video and all the plugs came out without breaking!! Cylinders 3 & 4 were the most difficult and in my case I was praying - please don't break and they didn't! I did put the copper anti seize on the ends as described as well as regular anti seize on the threads. Definitely made a difference in the power and cured the hesitation problem. Motor runs great! Not going to go to that dealer in Seattle on Lake City way anymore. They just lost a customer.....
Let us know! Thanks for watching!
He used nickel not copper
Thanks so much for making your terrific video. I did just exactly as you described and was all set for a harrowing day. All went well! I did discover that in late 2008 Ford finally made a correction and made heads for the 5.4 V8 Triton motor that accepts regular "normal" type spark plugs. You can tell what kind of plugs are in your truck by the color of the coil plug boot. If the boots are black, then you're going you have the achy breaky spark plugs. If the boots are brown you should have the new head design normal type spark pugs. Thanks again for taking the time to make your terrific video!!
Just finished a 2007 F150 5.4L, replaced all 8 plugs and coils, nothing broke. Thank you for the tips and I followed the process you suggested. Well done! You helped get some cash in my pocket and saved the truck owner a pile of money based on all the local repair shop estimates.
Nice work!!! Thanks for watching!
This is the best video I have seen on this subject. BRAVO! You explain in detail how to hopefully prevent the problem instead of how to fix the problem I find this is a much better route generally. As to doing the other 6 plugs if the folks watching this can't figure it out they need to donate their tools to the local auto repair school and break out the credit card. Please keep the excellent content coming.
Thank you so much for watching and leaving such a nice comment!
I cant thank you enough for the tip on removing the ECM!! DUDE...I bet you saved me half a day fighting with those back left plugs.
You bet! So much easier! Thanks for watching!
Well done and illustrated, I like the way you do things, carefully and methodically. Thank you for sharing.
Thanks for the video. I'm buying an 08 with 94k miles on it. I plan on taking it home and doing the plugs immediately. thanks for the tips.
Couldn't get any shop to replace my plugs and caps. Lol did my research and found out that my motor had the new heads that take the 12mm plugs. Took me less than an hour to replace my plugs and caps. Ford wanted 500 to do the job , that was just labor. Glad I took the time and did a little research. 2009 F150 5.4l
Nice work! Thanks for watching!
This is the best demonstration of how to do this job I have ever seen. Thanks man.
Thanks to your video, I got my 07 5.4 f150 done in 3 hours. Took my time so the intake cleaner was soaking on the plugs good.
Nice work! That is pretty good time for this job if I am honest. Taking your time is key with this repair. Thanks for watching!
i like how you did this spark plug replacement. you took your time and covered this tedious job in detail. i will be doing mine within the next couple weeks. thanks for an awesome video!
Awesome! Thanks for watching!
Excellent tutorial! Got it done in about 8 hours over a few days despite having almost no experience under the hood. It was NOT easy. I now understand why a pro would charge as much as they do for the labor on this. If I'd fully understood what I was getting myself into I probably would've sucked it up and paid someone, but I'm glad I got the experience and acquired more tools with some of the money I saved. I found the plugs on the left side to be quite a bit easier to access than the ones on the right once all obstacles were removed. For me, the right rear plug was by far the most awkward to reach as it's in a tight spot with nothing easy to remove for better access. This may be obvious to anyone who knows what they're doing, but I learned the hard way that a breaker bar really is needed to get the plugs loose; even with carb spray I broke a socket wrench trying to get a plug unstuck. Having a variety of extension bars on hand was also very good advice.👍
We did exactly what he did in the video and not one was broken, great work guys!
Did not use impact wrench
I have a 2007 f-150 with 145,000 miles original plugs. Video Very Helpful. Tool and Technique worked. On 5-24-19 I Removed all eight spark plugs none broke. Thanks for the great tips and posting this video.
Awesome! Love to hear that! Thanks for watching!
Best video I've seen on this issue. Minutes away from starting the change on my 05
Thank you so much! You got this! Take your time and go slow and you will be just fine.
AAA+ Video. I have a truck that has been sitting for 4 years nobody wanted to work on it because of the risk or plugs breaking off in the head of the engine. I had given up on the truck until I watched this video. My best job site guy of 22 years, that I call on to crack ceased up nuts and bolts. He uses the same type of method with PB blast with great success. Old timers have always bragged about Kroil oil . I finally bought Kroil oil for the first time and the 9/16 extension. Today I followed your process using pressure air to blow out the dry dry plug sockets. Then Kroil oil to soak a while before cracking the plugs back in forth. My truck has 135k miles in a salty beachside area with the original plugs in it. 100% Success on all eight plugs. Thank you for this great video.
WOW that's awesome! Thank you so much for watching!
Great methodical content, explanation of your technique, and appreciate the specs and carb cleaner tip. Working by feel really is where the rubber meets the road for a lot of us and shows off experience. Preparing to do an '05 next week with just over 100k on original plugs too. Cheers! 🍻
Glad it was helpful! Thanks for watching Brett!
This video was very helpful, thank you very much for making it
Hey how's it going. Those 3v are a headache. Good video. I'm sending out a couple of my shop shirts out to some youtubers. Seeing if you would like one
Thank you for not using power tools! I clicked on three other videos looking for some help and wisely turned them off as soon as I saw impact wrench’s! You are a good mechanic!
I really like to feel what's going on in this delicate situation. Thanks for watching Garrett!
I would not be surprised to see busy mechanics impacting plugs back in before torquing manually
👍
I used a 12v impact driver to go back and forth in a small kicks and worked. I think with the socket wrench is the way to just break those. Of course a lot of PB blaster.
I was lucky to get 5 of them out following your instructions. 3 broke but I used the Lisle extractor for them. Electrode broke off in one and I used a 2X crescent pliers to pull it out before extracting. Thank you so much for the very helpful video. Runs like it used to now!
Nice work! Sorry you had 3 break off but honestly that's not as bad as I have seen. People have told me they broke all 8 off. Thanks so much for watching!
I have a 2007 plugs every 40000 klm. First change very tight with method you have shown last couple came out like butter. The area where they bind up is the shell where ford tells you to apply the anti seize.The shell is a close tolerance fit to the head for heat dissaption. Carbon builds up in this area causing the plug to shear on the assembly wield. This wield is still used on the latest plug design but the 2004 build date plugs deemed as two piece were the same design but the shell was a loose fit as the engineers wanted the plug to get its seat wedge crushed as apposed to screwed into the aluminum seat. This was still a weak point on later one piece designs that you could not turn the shell.But what the ford engineers have been doing is loosing up the tolerance on the plug shell giving more room for carbon to break up on disassembly. Applying anti seize takes up room in this void and resists carbon sticking to the shell portion of the plug making removal less of a task. Sorry for my rant 30 years licenced 15 of thoes working for a Ford dealer.Just wanted to explain these are not the same as the early 2 valve 5.4 and 4.6 that blew out the threads due to the insufficient 5 threads and the low torque spec 18 ftlbs upped to 25 ftlbs. Everything is junk until you understand it!!!
Just watched your video looking forward to giving my Ford f150 5.4 V8. New spark plugs. Thank you for your video. This will really help me get the work done and save money. As it's crazy expensive to have a mechanic replace the plugs. Thanks in advance! I will let you know how it goes. Wish me luck 😃🤞🏽
I used 3M electrical tape for my extension and socket but I'm buying the OTC 6900 now. Thanks!
Appreciate the video, I followed the steps exactly. 06 F150 122,000mi and didn’t break a single plug. Took me a few hours but saved hundreds of dollars
Nice work! Thanks for watching!
Very nice clear video. I have 2004 with about 96,000 miles on it. I plan on doing it with patience just as you describe. I read that Ford Manual instruction online going back and forth with the carb cleaner soak however seeing it done with success was reassuring. Thanks for doing the video. If you still have the truck I put a banks cold air kit on mine at about 55,000 miles. It was worth the money it makes a big difference with two of the valves out of three being on the intake side. The factory box is very restrictive.
96,000 is very low you lucky dog. Mine has 140k now. Might do an engine swap in the future. It had an Air Raid system on it when I bought it but I took it off and put the stock one back on.
I'm really glad this video helped you! Thank you for watching!
@@2carpros Not every Triton 5.4 Has those dastardly Spark plugs. My 2004 Expedition had Motor craft SP-479. they came out very easy. You were right on being the worst Plug removal job I have ever done. My knuckles and eyeballs were very challenged with tight spots and fishing blind removing and reinserting screws. 148,000 miles
I’ve been super nervous about attempting this , but feel confident about this now after watching this! Thank you.
Did you get it done?
Thanks for the in depth details on this process. The carb cleaner and going back and forth trick seems to be the big thing here. First time seeing the carb cleaner idea but will be doing this when I tackle my 08. Doesn't seem like too bad of a nightmare as explained in many other videos lol.
No problem! You got this! Thanks for watching!
This video was soooo helpful and so far I was able to remove the entire driver's side 4 with zero breakage.
Awesome! Thanks for watching!
2004 5.4L F-150
Wow! You saved my ass and wallet. I've been putting off changing the plugs in our truck, due to the horror stories. Thank you so much for this trick! Really worked well.
Changed my plugs on my 06 f-150 today and didn't break one plug! Thank you for the awesome video!
Awesome work! Thanks for watching Robert!
It worked, replaced #5 in my 2007 Ford F150 V8 5.4 liter, runs great.
Awesome! Thanks for watching!
Thanks man, good video, very informative, just ordered the extension from your link !
Awesome, thank you!
Just did mine, 144k miles original plugs. None broke thankfully. I ran a couple cans of Seafoam through the tank and cracked them when the engine was hot about 1/4-1/2 turn then did a soak. One back by the firewall was tight the rest were easy. Followed this method. Thanks bud.
Nice work! Thanks for watching David!
might have to change the plugs on my work truck, thanks for this video Lavco👍
Thanks Dr. T! :D
Thanks to your video. I was able to replace the plugs in my 2005 F150 5.4 V8 without breaking any at 147,000. Some were very tight but finally gave up taking it slow and easy as you said. thanks again.
Awesome! Thank you for watching!
Did you use that special plug thing or just a normal socket ?
It's actually good practice to change all of the boots when doing the plugs as the boots break down over time from being around the engine heat.
Mine looked surprisingly okay at 136k miles
Very good tips and recommendation for the spark plug socket. Thank you.
Glad to help!
I found your video this morning and boy am I glad I did. I got 8 out of 8 plugs removed on my 2007 F-150 5.4L this morning following the procedure you showed. I will say that you should mention that you might need to repeat the squirt of carb cleaner if the plug doesn't loosen up after the first application. I had to loosen then tighten then spray again and wait several times on some of them. Number 4 plug was the most difficult to break free. I think I had to repeat the process 4 times before it came loose. Of course number 4 and number 8 are the most difficult to get to also. So to the naysayers who said they still broke off the plugs I say to them you should have had more patience and kept trying the process instead of just expecting the plug to loosen up the first time. One more thing, after the plug does loosen up I recommend blowing the excess carb cleaner out of the plug recess before removing the plug. Doing that will prevent the carb cleaner from running down into the cylinder and taking all the dirt and crud with it. I imagine it would run past the rings and into the oil pan and contaminate the oil. Kudos 2CarPros!
I am so happy this worked for you and you took your time. This is definitely a go slow and win kind of repair. Thank you so much for watching!
Thanks so much for the video. This was such an intimidating job but we had to try the job ourselves to save money. I love the idea of using carb cleaner on a warm engine and walking the plugs out slowly. We also added Sea Foam to the tank the day before. I can't swear it helped, but we got all 8 out with no real trouble.
Thanks for watching!
Yes thank you that was a helpful hint
Super video. I was curious what it would take to change plugs and cylinder ignition coils (cic) on my 2007 F150, as it was misfiring intermittently. As it turns out all I did was jiggle the cic and it's wires and it's been running great since. I imagine it was just corrosion build-up that was preventing proper electrical connection...
what is the cic? I'm having intermittent misfire too!
This looks promising 👌. Still apprehensive as he'll about doing this. I've been quoted from 7 to 8 hundred dollars from Ford and other places to do this. It a 08 service I picked up for 4000 with 212 thousand miles . Have watched you and the Ford tech make you local guy using a impact on a really hot engine. If one of you guys was there when I attempted it. It would be no sweat. But you won't be.
Oh it is scary don't get me wrong but if you go slow and be methodical you will be just fine. Thanks for watching Mark!
Great video. My Ford dealer told me that you need to remove the plugs with the engine HOT. They used an impact gun. Well I thought that was crazy . Back in 85 I had a Dodge turbo Lancer with aluminum heads. I always change my plugs with engine cold. No problems. When I took the car in for a tune up { didnt have time} they , the dealer , stripped the threads on the head. 2grand for a remand.head. Your video just enforced my belief that the Ford dealership was mlking me for more money. I haven't done my 05 pickup yet , but I know the plugs can be done ! Thanks !I hate going to Dealers.Don't trust them !
I would never use an impact gun on plugs, ever. I see the hot engine argument sorta but I really like the way I did in the video. Thanks for watching!
Great video. Glad that you explained the tightening and loosing method for the plugs. I was considering using Kroil instead of carb cleaner. Have you ever heard of using that stuff to do plugs? Thanks
Nice quality video and great tutorial.
Thank you for your video, I worry a lot about changing spark plugs for my 2006 lincoln navigator, after watching your video I am successful today
They can be tricky! Thanks for watching!
Thank you for making a great and informative video. This has convinced me to do it myself.
Go for it!
I DID IT!!! I drive a 2007 Expedition with 248,000 miles on the odometer. Local shops wanted $700 to $800 to change the plugs. Using your method I changed plugs and coils for around $200. I took my time and followed your advice. It was time consuming but I did not break a single plug. It did have the old style plugs and I have no idea how old they were. My Expedition runs like new. Thank you so much for posting this video.
Heck yes! That is awesome, I'm so glad you saved some series cash. Thanks for watching!
Where did you buy the socket to remove the spark plug
I have a 2004 econline with the 5.4 it has 274,000 miles and it has trouble stumbling up hills. We're you having any problems before the change. Im terrified
@@dan79transam65 Oh yeah. It would stumble and go into limp mode when I tried to pass someone on the highway. Now, it runs so smoothly and has so much more power. It was a lot of work to change the plugs and coils, but was totally worth the effort.
@@txdave2 ok thankyou
Thank you thank you thank you! All videos that I watched never showed what you did. Thank you! I ❤ my Ford
You are so welcome! Thanks for watching Antonio!
when you have everything off like that, you might as well clean the throttle body. Easy to do with throttle body cleaner. DONT use the carb cleaner as that is a bit more abrasive, get throttle body cleaner. Just remove air cleaner box and it has 4 bolts holding it on. Get an old toothbrush and the buildup comes off fairly easy. Your engine will react much crisper when you throttle up. Great video, I followed your directions and they came out without issue, thanks
yep and service the PCV that sends oil back in your intake.
Great tip and also after cleaning the T.B. and reinstalling everything, start the engine and let it idle for about 15 minutes to let the pcm relearn the new idle rpms cause now the T.B. is clean
Thanks! Worked great 06 F150 80k miles. Took 3 hours
Nice work!
Yeah as like everyone else i am super nervous about changing the plugs on my 2005. Before i watched this video i tried to work on one plug and broke it off so the shop fixed that problem. Thats why im so nervous about re trying it and dont have extra money to have a shop to replace all of them... Thank you for the video...
Thanks for watching!
I recently did a 2006 F150 5.4 without being aware of this issue... 84,000 miles and the boss thought it was the transmission, the misfire was so bad. I suspected the coils and figured on doing the plugs at the same time. I went slow, not breaking anything but was worried I might, they were such a pain to pull (and about crapped myself after learning that these engines have a serious issue with it). The electrodes were wore down to the ceramic. Tons of power now (a few days later, I ended up replacing the original battery - it lasted 14 years!).
I bought a 2008 F350 a few days ago with the same engine and it is a gutless beast, 140,000 miles, and I’m not sure if they’ve been replaced; given my results with the F150 I’ll do the same again with the same Motocraft spark plugs and Accel coils.
Thanks for the tutorial!
Nice work and thanks for watching!
I have a 2006 f 150 4.6 with orig battery... crazy its still hanging in there
@@Steven-mm7gb I'm a huge believer in FOMOCO parts, partially due to this!
Thank you for the carb cleaner soak tip and for explaining what Ford stated to do on this job. (i.e. Loosening then tightening the plug.) Very thorough video. Thanks!!!
No problem, it is what I am here for! Thank you for watching!
I'm going to be doing this work today on an '06 F-150 5.4L with 252,000 miles. Appreciate your video. It's very informative. Got a quote to do all 8 plugs and ignition coils for $1100. I purchased the parts for about $500. So I'm looking forward to saving that money. Hoping to not break any plugs
They get a fortune for that! Thanks for watching and good luck!
Thanks, that really helped out a lot!
Glad to hear it!
Thank you for the information, I sincerely appreciate it.
Glad it was helpful! Thanks for watching!
I just did it for 2007 mustang GT. My plugs werent that stuck but great video. Helped me a lot.i got all 8 intact.
Nice work!
Thanks for the video great advice
I ordered coils and plugs for my 08 based on the coils that were in the truck and I got plugs that had threads almost all the way down. Then I did research and found ford pretty much fixed the plug problem half way through 08. My expedition has a manufacture date of 12/07 and it had the new style plugs. The only thing I can think of is that the motor was replaced soon after being sold, because the gap on the plugs I pulled out was about .110. I would have to surmise these were the original plugs to the motor. Truck has 208k miles.
Thank you guy, I think I can perform that job with your tips.
You can do it! Thanks for watching Jesse!
Great video and so clearly explained. I'm going to do this myself on my 2006..first time ever for me to do it myself. Love the carburetor spray trick. Thanks so much
You got this! Thanks for watching!
Thanxfor the wisdomfrom a young wrench .I'm 69 and stillcan learn.
Thanks for watching!
Excellent video, thank you for the help.
You're welcome!
Great video , I have to do this one to my 2005 f150 that has a 5 and 6 mis fire. I'm going to do all of them of course but my ASS changes when I think about it because od the horror stories I have herd, after this video I belive I can handle it and waste a Saturday LOL . THANKS AGAIN FOR THE TIPS
Changed all 8 with out one plug being broke or stuck
Outstanding video. Thanks.
Thank you too!
Getting ready to do this job. What do you think about cracking the spark plug 1/4 turn then spraying Ford carb cleaner, let it soak over night, then using the OTC 6918 spark plug tool to remove?
Letting it soak overnight seems a bit excessive. But couldn't hurt! Other than that sounds like a solid plan. Thanks for watching!
‘05 F150 with 90k, been sputtering for a while and now showing misfires in cylinders 4,5,8. Tried the hot engine method (also been adding sea foam last couple tanks) with impact wrench at 80psi, all good and no issues so far with half of them (1,2,5,6). Attempting the others tomorrow.
Update: Replaced them all without breakage, just one damaged boot ($6). #4 was so loose I backed it out by hand and the electrode was pretty much gone. #8 was the most difficult, couldn’t fit the impact wrench back there very well so I backed it out a bit, sprayed some carb cleaner and let it sit for a bit, then was able to back it out slowly. I let everything cool down for at least a couple hours before torquing....truck runs great now.
Thanks for the video it helped me change my plugs but I'm still getting a misfiring code on 2 of my plugs and I already changed the ignition coils as well idk what else it could be any idea
The plugs can be defective or the glass can be cracked. I'd carefully change them again. Thanks for watching!
I've done three of these and it's not that bad. Take your time but it only took me about 2 hours each time. I used my impact driver on the coils and my 3/8 compact impact on the plugs. The thing nobody mentions is the coil plug keepers, they WILL break when you press them to release the plug. I used a small zip tie to tighten them snug on the coil.
Tried this on what I considered the 2 easiest plugs to get to, passenger side front and so far have broke them both! I followed these instructions to the letter and even let my cleaner sit for a few hours but they both broke. What's interesting is the back and forth motion felt and seemed like it was working but the porcelain must have just broke from the get go! Now I get to look forward to using a Lisle tool to try and remove the broken ones then replace them and try this technique again after running some SeaFoam through the tank and doing it while the engine is warm on the other 6!
Sorry to hear that plugs broke! That's no fun and one of the big draw backs to these engines. I have heard very good things about Lisle tool to remove the plugs and I wish you the best of luck! Thank you so much for watching!
@@2carpros Did my last 6 today on a 2006 with 84K on them. As I said the first 2 I did with the truck cold using just the crack and spray method but both of those broke. For the next 6 I did the Sea Foam in the gas and also heated up my engine. First 4 came out intact and I was left with the 2 back ones on the drivers side. I buttoned everything up ran the truck again just to be sure but those last 2 broke anyway! It really isn't a hard job as long as you have a broken plug remover like the Lisle I have and let me tell you that thing works great and it's really easier than you think it is. In the end I got all 8 of mine done with 4 intact and 4 broken probably would have been 6 intact had I done those first 2 using this method1 Also added new coils and hopefully it's all good as I'm not planning on doing it again before I get rid of this truck. If you're thinking about doing it however, don't hesitate to tackle this job, it wasn't as bad as I and I'm sure many think it's going to be!
I now feel confident to do this job on my truck. Great video.
Thank you for posting this video, my 16yr old daughter was able to have a solid mechanical win (me supervising of course) replacing all of the spark plugs & coils in her '06 F150 5.4L with almost no problems!
Wow that's awesome!! Thank you so much for watching and for your thanks, it really helps the channel!
I appreciate you very much bro love from SD/TJ
Thanks for watching!
Excellent tutorial. Thank you!!
You're very welcome!
Good video, clear instruction. How many hours did it take? I miss cast iron heads.
Thanks for watching! With filming it takes much longer. But not filming maybe 2 hours or so.
I teach my student to use a piece of fuel line or rubber hose to start plugs. That way if it threads in easy it started. Other wise they could cross thread. the coil hold bolts are like 6-10 in lb. Like you said those of us that do this kind of stuff, snug.
djh3_88 Hinskey my dad taught me the same thing growing up. Using a hose to start threading it, works great to not cross thread. 👍🏻
Bad idea, they will be there forever, show them the right way
@@brentbradley6711 Same as the spark plug starter tool sold by Snap on and the likes, only less money. Or you can start them with a ratchet if you want.
I do the same thing but with a drink straw. Works great.
Good work buddy 👍👍
Thank you! Cheers!
Hi there, excellent work, you have outstanding judgement and hand feel to know what is right. Most can't get it right enough. I was curious though about something. The ford TSB calls for de-carboning the "hole" before installing the new spark plugs otherwise the new ones might not be installed properly and subject to high stresses after installation. How can one go about "de-carboning the hole" ?
Bottle brush and carb spray I'd imagine. I'd just be worried about crud getting down in the piston.
@@2carpros yes. Interestingly the TSB wants us to crank the motor once with all the spark plugs out to eject any material inside ! But this whole thing is just ridiculously out of ordinary in the world of spark plug changes. My wife thinks this is again one of my over-engineered and over-planned projects but I keep telling her no it’s not. This is a dreaded task even for experienced mechanics who all day long remove plugs just to check compression to inspect a used car.
Sweet thanks for the heads up
No problem 👍
Excellent Video! Thanks
Thanks for watching!
outstanding video thank you for your work
My pleasure!
Great video , I use Kroil, you only need a few drops to spray at the base of the spark plug it will get into places a 1,000,000th of an inch. Kroil is not water based like WD40 . Thanks for the video !
Great tip!
Good Video, I also like your graphic for your channel name.
do you have the link to were you got the steps?
I parked my 2004 in the garage for 2 days and soaked all of them with PB Blaster. The plugs nearest the firewall (heat kills) wanted to break so I had the Ford shop do those.
how long were those plugs in for?
Great learning video....Thx
Glad you liked it!
Do you recommand any specific scan tool for those 2006 truck ? Thanks
Hi,
I know this is a older video but i wanted to know which is the best one piece spark plug to use on a 2005 ford expedition 5.4l. engine.
Also the best coil pack to purchase.
Thanks
Always buy Motorcraft for your Ford and you will be good to go. Thanks for watching!
this is what happens when you try to reinvent the spark plug it's been fine for a hundred years leave it alone thx ford
Haha that is too good! Yeah I don't know why they went that route but they did. I can tell you the next gen of F150 after this went back to normal plugs. Thanks for watching Joseph!
Understood but in some cases what will happen will happen.
Well don't buy a new car from anybody except tesla because your gonna be upset.
@@tomthumb4760 You're not understanding Ford redesigned the spark plugs that breaks n the head
Patience makes a good rule . Any way thanks for the tips .
100 percent! Thanks for watching Tim!
Well,,, I think you've been lucky so far especially considering I could not find any local repair shop that would do them because they break so often.The one plug you took off looked like it was in amazing shape for the miles on the truck compared to mine. I did a lot of research before I did my 2004 F150 with 123,000 miles. I took my time using a technique simliar to yours and several other different techniques I learned on you tube. All 8 plugs eventually broke. In fact the broken plugs were so seized I broke my extractor tool and had to rent one to get them all out. No special trick or technique wouldve helped. With an inspection camera, vacuum and a lot of time I was able get all the tiny pieces out of my cylinders. I do all my own work and I am not a mechanic but have any tool I need. It was about an 8 - 10 hour job because I took my time. I was not willing to pay my local Ford dealers $300 for a spark plug job and that's for NO broken plugs. I'm not doubting your expertise as a mechanic but based on nothing except how terrible my plugs looked compared to yours I would say you've been very lucky.
Sorry to hear you had such trouble on your truck. You got very unlucky that all 8 plugs broke. This engine is great except for 3 things. The plugs, the cam phaser and, the oil pump. Thank you for watching!
So you are aware motorcraft 515 plugs were superceded with 546 because the original 515 were a 2peice design that often broke (hense the bad rep) the 546 plug are the "reinvented" or revised plug of a 1 peice shell design. That's why they don't sell them anymore.
interesting!
Thank you for the info
👍
Good job
Thanks for watching!
I couldn’t find a can of Air so I used a straw to carefully remove debris..
Worked pretty good 👍🏽
That's a good idea!
the method that works the best for me is assuring my truck that i will absolutely take it to the junk yard if it wants to play that game, or i compare it to it sibling, the 01 excursion with the 7.3l that was born perfection. usually works.
Thank you! My friend, It’s very nice you’re helping other how to do this stressful repairing job in our trucks... from Puerto Rico..👍
Thank you for watching!
I can't find any video showing how to do # 3 and #4, the most difficult ones. There are several coolant lines in the way, thick ones , at least 3/4", also a/c lines, at least on a 2007 Expedition.
At the 6:20 mark when removing the spark plug you recommend backing it off 1/8th to 1/4 turn and then spraying carb cleaner into the well. By backing it off do you mean tightening it? In my experience backing something off is loosening it.
Great video!
Question:
I am the original owner of a 2006 Ford F150 5.4L V8 with 63,000 miles. I'm trying to determine whether or not I need to replace the plugs (due to age) with the low miles I assume I do not need to replace them at this point. The truck runs perfect no codes being thrown or anything. I'm thinking preventative maintenance to stay ahead of any issues. Thanks for the info!
Yeah it's not a bad idea. Thanks for watching!