Yamaha FZ6N FZ6 DIY headlight light upgrade with Aharon Bi-LED retrofit projector installation video

Our new kit for the FZ6N with a Bi-LED projector instead of HID xenon
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
retrofitlab.com/products/yama...
𝗧𝗿𝗲𝗺𝗲𝗻𝗱𝗼𝘂𝘀 𝗹𝗶𝗴𝗵𝘁 𝗼𝘂𝘁𝗽𝘂𝘁 𝗮𝗻𝗱 𝘂𝗻𝗶𝗾𝘂𝗲 𝗹𝗼𝗼𝗸:
To upgrade Yamaha FZ6-N in terms of light output and to make it look even better than original, we have developed a custom Bi-LED headlight upgrade kit. Yes, that’s correct this kit uses a modern Aharon Bi-LED projector! This kit improves the looks, light output and safety. Which is always a big advantage on a motorcycle.
𝗙𝗿𝗼𝗺 𝗵𝗮𝗹𝗼𝗴𝗲𝗻 𝘁𝗼 𝗕𝗶-𝗟𝗘𝗗:
Our custom Yamaha FZ6-N upgrade kit contains everything you need to upgrade your halogen headlight to a powerful bi-LED projector headlight. The 2,5" Bi-LED Aharon projector provides both low- and high beam light. So the high beam function is still available. And the light pattern is also perfect, so you don’t blind oncoming traffic. The kit definitely takes your Yamaha FZ6-N to a higher level!
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗸𝗶𝘁:
• Guaranteed higher light output
• Increased safety
• Unique custom look
• Not blinding for oncoming traffic
In comparison with HID / xenon
• less strain on the electrical system
• easier to install, no bulky ballasts that are hard to mount out of sight
• no start-up time
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Instagram: / retrofitlab.com_official
Our website: www.retrofitlab.com/
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
So don’t hesitate and invest in the looks and safety of your FZ6-N with this bi-LED upgrade kit, you will certainly not regret it!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
#Yamaha #FZ1N #FZ6N #Aharon #Retrofit #retrofitlab #DIY #Upgrade #Headlight #lighting #HID #Retrofit #LED #custom #improvement #light

[@gedgoodenough291]

Iv just bought a kit from you and noticed you hashtag FZ1 on this video. Is the installation the same for the FZ1 as the FZ6 ?.. because the FZ1 installation video you have up is for the xenon and not the bi-led kit.

[@ctaacip5814]

Hello , kamu menggunakan bahan apa untuk bracket projector ?
Thank

[@Retrofitlab]

Hai, kami menggunakan keluli