Triumph Tiger 1050 / Daytona 675 Bi-led projectors, run both lights, custom headlight upgrade DIY

Suffering from the bad light output from the original projectors? Not liking that only one side is on? Then this is the ultimate upgrade solution for your Triumph Tiger 1050 or Daytona 675.
In this installation/light upgrade video of the Triumph Tiger 1050 or Daytona 675 headlight, we install a bi-LED projector upgrade kit. The Aharon AtomLED x2 bi-LED conversion kit with two bi-led projectors is used to make a guaranteed upgrade in light output and looks. Both sides will be on with low-beam (and high beam) for more light and for a symmetrical look.
We have re-used parts of the older HID bi-xenon retrofit installation video in this Bi-led video.
The kit contains 2 bi-led projectors for 2x low and high beam. And also a custom mounting bracket, butyl to reseal the headlight and a wiring harness to connect the bi-led projectors to the original wiring.
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗲 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
retrofitlab.co...
𝗧𝗿𝗲𝗺𝗲𝗻𝗱𝗼𝘂𝘀 𝗹𝗶𝗴𝗵𝘁 𝗼𝘂𝘁𝗽𝘂𝘁 𝗮𝗻𝗱 𝘂𝗻𝗶𝗾𝘂𝗲 𝗹𝗼𝗼𝗸:
To upgrade the Triumph Tiger 1050 or Daytona 675 headlight in terms of light output and to make it look even better than the original, we have developed a very high-quality Bi-LED headlight kit. Yes, that’s correct this kit uses a hyper-modern Aharon Bi-LED projector! This kit improves the looks, light output, and safety. Which is always a big advantage on a motorcycle.
𝗙𝗿𝗼𝗺 𝗵𝗮𝗹𝗼𝗴𝗲𝗻 𝘁𝗼 𝗕𝗶-𝗟𝗘𝗗:
Our custom Triumph Tiger 1050 or Daytona 675 headlight upgrade kit contains everything you need to upgrade your halogen headlight to a powerful bi-LED projector headlight. The 2,5" Bi-LED Aharon projector provides both low- and high beam light. So the high beam function is still available.
And the light pattern is also perfect, so you don’t blind oncoming traffic with stray light. The kit definitely takes your Triumph Tiger 1050 or Daytona 675 headlight to a higher level!
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗸𝗶𝘁:
• Much better light output
• Double low beam
• Double high beam
• No glare
• Awesome look because of the projectors and both sides lit up
• Installation can be done yourself
In comparison with HID xenon
• A bit less strain on the electrical system
• Easier to install, no bulky ballasts that are hard to mount out of sight
• No start-up time
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Instagram: / retrofitlab.com_official
Our website: www.retrofitla...
/ europeanheadlightcommu...
Be sure to follow us to keep updated when we have sales, new products etc.!
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
So don’t hesitate and invest in the looks and safety of your Triumph Tiger 1050 or Daytona 675 headlight with this bi-LED upgrade kit, you will certainly not regret it!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
#triumph #Tiger1050 #triumphtiger #daytona675 #triumphbikes #Aharon #Retrofit #retrofitlab #DIY #Upgrade #Headlight #lighting #HID #Retrofit #LED #custom #improvement #light #xenon #motorcycle #sportbike #motorcycle #bikelife #universalbikers #projector #bi-led
www.retrofitlab...

[@maya00795]

Wow....... Too good 🥰🥰🥰🥰🤩🤩🤩🤩

[@Retrofitlab]

Thanks!

[@maya00795]

@@Retrofitlab welcome buddy 💖💖💖💖💖

[@hulkhogan9450]

Is this for Gen 1 (06-08) daytona 675 or the gen 2 (09-12)

[@xWulfyy]

What is the LED Longevity/Lifespan? What do you do if the LED Fails, can you change it out or do you have to get a whole unit?

[@Retrofitlab]

Sorry, can't tell the exact amount of hours. But, in many cases, with the low amount of hours light is used on a motorcycle it outlives most vehicles' lifespan. You need to change the complete projector when the LED fails. We also have a HID / xenon version of this kit, in which you can change the bulb if it fails :-).